Reviews
No other Size
Used for Horizontal TypeEngine HeadBreather Hose 650mm 6mm Diameter.
After searching for a compact product that could be directly connected to a 6mm inner diameter Hose, we found this product, which fits easily into tight spaces and meets our objectives.
Just look at the picture and Quantity:I bought it thinking it was 1 Set of 2pcs. but in fact it is Quantity:It was 1 pc. so it was disappointing in terms of cosmetics.
View detail
Almost the only external Stud bolt
Since DAYTONA's reinforced Stud was discontinued, there was no other choice but to purchase an external Stud.
However, I have heard that it is stronger than OEM, so I am hopeful about the performance of the one I chose by process of elimination.
View detail
CUB to Blowby hose in!
CUB I put it on first, of the Blowby hose. The price was good and inexpensive. View detail
Fits: HONDA XR100 Motard, HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 100
ape100 engine Knock Pin Set
There is no difference from the About quality and textured product It's not used yet. It's going to be used for engine overhauls Recommended if installation difficulty engine disassembly is possible Cost performance and comparison with other products It is easier to buy and use compared to std products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice when purchasing Since it is an aluminum product, it must be stored clearly I recommend this product if you do engine overhaul View detail
For Oil cooler installation
I purchased this product to install Oil cooler.
Maybe the color is only Black since it is used for Grom?
Black is probably better for the custom feel, but I was hoping there would be a Silver version as well.
The oil cooler is the same SHIFT UP Original 12-stages Oil Cooler Kit.
It also has a cooling effect, so the objective is achieved.
It is tempting to make it a CartridgeOil Filter, though,
It is hard to replace the clutch cover for the oil cooler for less than 3,000 yen.
View detail
It's a little late for that, but...
It's too late now because Webike has discontinued the sale of this product,
Since we used OEMAir cleaner at that time, the oil cooler can only be installed under the cylinder head,
SHIFT UP is selected.
Note that the NORMAL cylinder does not have an oil line outlet for the oil cooler, so it is replaced with the SHIFT UP cylinder.
We were able to obtain a bare air cleaner from Cats Factory, so we removed the NORMAL Air Cleaner Unit.
I was wondering if I should replace it with the UpMount type oil cooler from KITACO or Takegawa because of the sand and stones that roll up from the front tires.
I was casually looking at SHIFT UP's WebCatalogue and saw that for some reason some of the images were on the top→ I thought if I changed the place where I put them from the bottom to the top, I could go ahead and do that, right? I was just as excited as I was when I actually did it, and it was completed without any problems.
I am happy that the area where the OEM air cleaner was located is not scuffed up.
The cooling performance was just under 130°C with OPMID's Meter reading in 3rd gear on a climb that lasted about 5 km.
Before the cooler was installed, the temperature exceeded 140 degrees Celsius, so the cooling effect is more than 10 degrees Celsius.
View detail
Breather
About quality and texture a pretty good quality finish About the feeling of use There is no difference from SHIFT UP BREATHER HOSE END PRODUCT #950021-02 Products to buy together Carbon Oil Catch Tank [616-1432200] - KITACO Internal diameter 8 mm hose Difficulty of installation EASY Cost performance and comparison with other products I installed SHIFT UP BREATHER HOSE END PRODUCT # 950021-02, but I didn't like the hose fixing, so I chose this product and I was able to finish it neatly About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing It was nice to have a clean finish, and it feels a little special. Kitaco oil catch and internal diameter fit well, so there was no problem installing it View detail
Carburetor setting companion
Carburetor setting changes slightly each time you play with MONKEY's Engine.
I bought this one because I couldn't find the number I wanted this time.
I didn't happen to have #80 or lower on hand, and since I use multiple carburetors, it was nice to have an intermediate number.
The price is reasonable.
View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
SHIFT UP Oil Shower Billet Head Cover
About quality and texture It is light and has a high quality finish About the feeling of use I think I can protect my High Cam Shaft enough Products to buy together SHIFT UP Oil Shower Billet Camshaft Holder Difficulty of installation Read the manual carefully and install the bolt washer Even beginners can easily install it. Cost performance and comparison with other products I understand that the oil inflow is less than other products However, if you install SHIFT UP Oil Shower Bullet Camshaft Holder together, I think we can show better cooling to other companies than products About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing The only oil shower product I can buy now is SHIFT UP, but if you have a high cam installed, I definitely recommend it View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
SHIFT UP Crankcase Oil Seal 4-Piece Set
About quality and texture to have good quality enough quality About the feeling of use I feel like I'm riding a new bike again Products to buy together Clank case gasket Difficulty of installation difficult, hard Cost performance and comparison with other products The price is good and the quality is high enough About shipping and packaging The packaging is always meticulous The delivery took a week Any concerns, cautions, or advice when purchasing The engine is old, so I bought it to play overhaul, and I will be able to enjoy riding again in a slightly new mood View detail
Engine oil cooler line
About quality and texture It has a double layer of rubber, so I think it will withstand the heat well. About the feeling of use It's actually delivering it to the oil cooler Products to buy together Wide Hose Clip Difficulty of installation easy, simple Cost performance and comparison with other products It is the best 2m rubber hose price. It has excellent performance About shipping and packaging The packaging is always meticulous The delivery took a week Any concerns, cautions, or advice when purchasing I recommend 2m products rather than 1m products I think it's better to buy it in a relaxed way View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
oil cooler
About quality and texture Sp takegawa could be installed in a special clutch case without any problems About the feeling of use There was no problem installing it The quality of the product is quite good Products to buy together MINIMOTO High Density Banjo M6 Hose Used Together Difficulty of installation be very easy to set up Cost performance and comparison with other products be of excellent quality About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing It's better to know the exact inside diameter of the hose I want to use and buy it View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
oil cooler
About quality and texture Sp takegawa could be installed in a special clutch case without any problems About the feeling of use There was no problem installing it The quality of the product is quite good Products to buy together MINIMOTO High Density Banjo M6 Hose Used Together Difficulty of installation be very easy to set up Cost performance and comparison with other products be of excellent quality About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing It's better to know the exact inside diameter of the hose I want to use and buy it View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
When you open the clutch cover
You will need it when you open the clutch cover of the Horizontal TypeEngine such as MONKEY. It is easy to replace. It is inexpensive, so please try it! View detail
Fits: HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
shift up
It was not installed for light weight. It is lighter and easier to install than normal. I really liked the color, so I was able to install it with a happy heart. But I thought that the price was a little high. ------------------------------------------------------------ ------ I didn't install it for light weight. It's lighter and easier to install than Normal, and I really liked the color so I could install it with a pleasant heart, but I thought it was a bit expensive. Powered by Google Translator View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
Few color choices
When I ordered the product, there were only two colors to choose from, silver and titanium, and black was sold out. I remember that I had seen red on the official website of shift up. I hope that the official shift up will be able to renew it. Put red and black products back on the shelves View detail
Refresh on Bore up
[How is it used?
I installed it at the same time when I installed Monkey Type Z Full Kit 88cc Type S Cylinder (https://www.webike.net/sd/23872950/) of MINIMOTO.
The year of my CUB is unknown, the mileage is unknown due to the replacement of the meter, and there is nothing to believe, so I built in Refresh and insurance.
Was the one you received as per Image?
It was just like the image. But the matte surface treatment was unexpected.
Was the installation difficult?
If you can double nut, it's a piece of cake.
How was your experience with it?
I was able to buy peace of mind. I have no complaints or concerns.
[Included Parts:were they on?
Nut, this is Garbage. The accuracy is too bad. It tries to kill the Stud bolt that I put.
[Was there anything that disappointed you?
Nut。
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you are thinking of installing a Reinforced Oil Pump, you should do this at the same time you remove the Stud bolt as it will make it easier to get the Drill in.
View detail
Fits: HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey, HONDA Super Cub 90, HONDA Benly CD90, HONDA monkey
In the Repair of Stud bolt
I bought it for replacement because the stud bolt was getting rusty.
This is a universal product, so it can be used with any motorcycle that fits the size of the Bolt.
The tip of the bolt is hexagonal, so you can tighten it with a wrench.
I chose it because it's Stainless Steel and I expected it to be rust resistant, but I've been using it for two years and it hasn't rusted in any way, so I think it's cosmetically sound.
View detail
I think it's a good Parts!
The Stud bolt was replaced with this product along with the 110?
There's no specific explanation in SHIFT UP, but it feels like it's solid against NORMAL If there is an intensity description in the Manufacturer, the User will be able to see the Large change I'm glad to hear that, because I have no idea how it works against NORMAL, Plating's Cap nut would be a good Accent for Head
Engine Displacement VolumeUpEngine requires these Parts I think
I'm glad I bought it
View detail
Satisfied with the construction
The Core part is different from other companies' spec. and is hard to bend The paint is solid, so it will be easy to remove bugs and dust by washing the car after running View detail