Reviews
Exhaust pressure adjustment
cbr250rr mc51 AKRAPOVICExhaust System
cbr250r mc41 WR'sExhaust System
mounted on
AKRAPOVIC can also ensure exhaust pressure, and the volume is lowered just right.
WR's are too subtle with too much exhaust pressure. Volume goes down.
Glass Wool burns quickly, so it is a recommendation to wrap Stain Wool on top of the purchased condition.
Since the exclusive for RepairGlass Wool is expensive at 1,000 yen, commercially available for RepairGlass Wool with Stainless needle Gold is sufficient.
By the way, if you open your fingernail so much that it is too hard to insert it, if you open the Axel all the way, you can….
View detail
Effective for Torque up (Sound deadening effect?)
AKRAPOVIC's Full Exhaust System&Silencer on MC51 (for Race) The combination of the two was used.
In the Circuit, the inner baffle was too loose without the baffle and the Torque was insufficient at low RPM. (BF50S/M) attached.
Torque recovered, but the exhaust sound was still too loud and bothersome, so I purchased a one size small BF50S/S this time.
The sound deadening effect of the BF50S/M is virtually non-existent.
In addition, all of the sound deadening material burned out after about 20 minutes of Circuit driving.
I would like to check the effect of BF50SS in the next Circuit run.
The results were measured with a sound level meter before and after the replacement of M&arr;S.
(1m away from Silencer)
*Please use it only as a reference, as it varies depending on the measurement conditions.
BF50SM (Sound deadening material burned out)
12000rpm (114.6dB)
4500rpm (Not measured)
BF50SM (Sound deadening material rewound)
12000rpm (113.5dB)
4500rpm (96.4dB)
BF50SS (with sound deadening material (new)) )
12000rpm (110.9dB)
4500rpm (95.3dB)
Idling (82.1dB)
For those who drive on the street, we recommend installing JMCAMODEL's Silencer.
View detail
When it runs, it's Bigli
I ran it and it was very quiet.
I didn't know that at the time of Idling, sorry.
I installed it on techserfu's Silencer to try it out!
It was very quiet with Silencer's End Baffle removed!
Loud enough to pass inspection (99 decibels)
It was like a Motorcycle for Large people.
After driving 200 km, I checked the White Glass Wool and found it to be pure Black!
View detail
Subtle Product.
It has been on the market for a long time now, maybe 20 years.
Used on a BuellX1 with a full titanium muffler from Kasuno.
The construction is quirky. The price is very bullish.
As for the effectiveness, there are other inexpensive and effective ways to muffle the sound. If you are looking for a back pressure control, you may be able to find some use for it, but if you are looking for a S size control, you may not be able to find a good solution.
Please buy one and try it.
I sold immediately.
View detail
Longing for Long Type
[How is it used?
Mounted on Φ85 400mm Titaniumium silencer.
Was the one you received as per Image?
Image itself
Was the installation difficult?
It was so easy that I was surprised.
How was your experience with it?
Not much different (to the human ear).
[Included Parts:were they on?
It came with an outer bag and a brief instruction manual.
[Was there anything that disappointed you?
I was wondering if it is too much out of the box FOR Silencer?
Point and hang of installation/You can use a longer day if you work in the morning.
There is a simple instruction manual, but if you can't understand it, you should give up installing it by yourself even if you buy it.
Note/If you are buzzing around with Engine on first thing in the morning, the police will be called.
Items to buy together/Double wall L.M.S each size of Automatic magic and Maverick Inner silencer RACING and silencing
Opinions and requests to Manufacturer/Too expensive just because it's a patent.
You know those super cheap Inner baffles on Amazon? To be honest, it is cheaper and more informative to buy all the patterns in that series and try them out!
It's also very effective at muffling sound. It's inexpensive, so we can process it without hesitation.
This time it's Pattyn who will eventually go to Yahoo!
Thanks for reading to the end!
View detail
It's a very interesting component.
Here's an impresario of the Single wall.
Originally purchased and installed Single Wall S Size
I didn't drive it, but it seemed to be muffled at Idling.
I'm so concerned about Long Type that I can only sleep 8 hours a day.
I bought Long Type without even running it.
The price seems a little high to me, and I don't think it's cost-effective in the consumer's mind.
Automatic magic has always been that way, so it can't be helped.
In the feel of the installations on techserfu's Silencer.
It doesn't muffle the sound much, but the numbers seem to indicate that it would have gone down.
It would be like adjusting the exhaust pressure.
In that sense, it works.
I'm glad I bought this part.
It's a great way to learn.
View detail
Somewhat effective
It seems that everyone is buying Bubble, Inner silencer, etc. because they think they are so effective!
The Silencer's original End Baffle is effective (because it blocks the exit).
The insulation, which is called "sound deadening material" in the middle of the road, does not muffle the sound (it does muffle it a little, but only a little).
This product is not very effective, but it does have some effect.
[That's about right. Buy on the second place!
I installed Type S this time, but M Type and Type L are almost meaningless (a little bit is possible).
The average person can't tell the difference between 90 decibels and 91 decibels.
90, 94 and 98 would be totally different.
It only muffles the sound to that extent, so don't give it an over-large rating.
What I'm trying to say is. [Not very effective]. that is to say
[Sound quality changes, volume remains the same. And [The volume changes, but the sound quality remains the same. And Brushbo!
If you want the effect, Long Type is the way to go (though I've never installed it).
View detail
I guess it's better than nothing.
I write honestly and without discovery.
First of all, I don't like Automatic magic, but this product has been on my mind for several years (would I like it?).
It was in stock at WeBig, so I kind of bought it.
What did you think after installation?
Better than nothing? Degree.
I think the backward Long Type would be better.
I have Maverick's Inner baffle muffling type, so I am very interested in the backward type.
But I think it's great that the volume goes down with Items like this.
I'm attaching a photo and will leave a comment on the photo.
The exhaust system is StainlessYZF1000 THUNDER ACE of Over, and the silencer is GP Type of the early model of kFACTORY, but I am thinking of replacing it with Stainless carbon of techserfu that I have. I'm thinking of replacing it with techserfu's Stainless carbon.
I think this product would be the most efficient since techserfu is about the loudness of a Large person!
What I'm trying to say is that I want as webigPoint as possible with longer comments.
In case you're wondering, an average slight bending of the nails in three places was enough.
If the amount of bend is taken too Large, it will be difficult to return Large change.
The manual is very poor, but the person in MotorcycleManufacturer is a guy, so it is difficult to understand the manual if you don't have some knowledge of the product.
If you are not a self-starter, please ask a Motorcycle shop and pay for the labor (they should be able to take responsibility if something goes wrong).
This is a report from the field.
View detail
The effect is subtle ….
The quality of the product is good, the welding is beautiful and the large size is good. The installation work was not difficult if you have the skill to install the exhaust system, and the size of the product and the inside diameter of the exhaust system is exact, so I did not have to adjust anything.
Exhaust System is Asahina RACING79S for GSX1100S KATANA. As for the volume, I did not feel that the volume was suppressed especially in the Idling condition.
However, I felt that the mid RPM range became Mild, although I opened the Axel and blip pinged it while the car was stopped.
The purpose of this purchase was to install this product as a countermeasure for the volume limit at the time of the last vehicle inspection.
We are very happy with our purchase.
View detail
Mostly Satisfied
Used with NojimaExhaust pipe + TricksterShotgun.
I chose the W Wall S Size because the sound was much louder and the after sound was great. As a result, the sound became 10% quieter or not?
I feel that the sound quality has been improved. But I feel that the sound quality has improved. The sound is now beautiful and low quality.
After has also improved a lot, albeit somewhat.
Has the low-speed Torque recovered?
I guess I was satisfied with my purchase when I looked at the Total.
As for the muffling, it may be no sound at all in M and L sizes.
View detail
For volume control
I use it for BL-Factory's Exhaust System.
I have another M Size one and it measures close to the proximity exhaust sound measurement, according to Suma Four Pre's Volume Meter.
BL-Factory MBaffle 110dB
BL-Factory MBaffle + Automatic magic Inner baffle M Size 108dB
BL-Factory MBaffle + Automatic magic Inner baffle S Size 105dB
BL-Factory SBaffle 103dB
BL-Factory SBaffle + Automatic magic Inner baffle M Size 98dB
BL-Factory SBaffle + Automatic magic Inner baffle S Size 96dB
The result was that
View detail
Significant sound quality improvement and some sound deadening
Titaniumium full exhaust and carbon silencer by techserfu were installed on a GPZ900R.
Style is good, but the volume and sound quality did not match my taste.
I purchased this product to muffle sound and improve sound quality, and to some extent, the results were as I had hoped.
As for the sound deadening effect, as everyone has said, it is about as quiet as you can get. It is not drastically quieter, but I would say that you can ride at night as long as you don't turn it all the way up.
I am satisfied with the sound quality. Before the installation, the bass sound was not very refined, but now it is like that of a big bike.
I still felt a little sluggish at high rpm, but I will continue to work on it in the future in the hope that the setting will improve it.
There was a gap of about 3mm between the Silencer and Tail Pipe, but I didn't mind that much.
This is written here and I think it is an unavoidable part of the process.
View detail
I wish I could have purchased it as a Single Item.
First of all, it's in the product description.
The Large FZLogo section of the Side Panel is an overlay type.
Now it has been changed to a single piece in an improved version. (On the contrary, I appreciate it.)
YAMAHA Logo before and after Quantity:Pair (for Left and Right) I wish I could have purchased it as a Single Item since it is still available as OEM Parts in four places
FZ750 text in product photos is the same as OEM White] But what you will receive is an improved Silver. (Same color as PURE SPORTS)
Also, FZ750 and PURE SPORTS in the product photo are Quantity due to the color difference.:2pc. set-top (box, jet, etc.) (Separate) but
Automatic magic's Homepage has a one of a kind
FZ750 PURE SPORTS When PURE SPORTS FZ750 but
I actually got it in my hands. PURE SPORTS FZ750 were two pieces of
I'm so disgusted, I wish I could just go to Tahiti…
But Silver's FZ750] looks reasonable.
I gave the product as it was to the contractor for repainting, and the contractor, who knew nothing about it, stuck it on and Clear coated the top, with disappointing results… Well, the contractor was not to blame!
Let's take inspection seriously, automatic magic.
And I can't help but be amazed that the pictures of the Webig are using the early MODEL's, it's as if I bought a completely different product!
If we were to seriously sue, we would definitely win, but we dare not.
The latest RODs are. PURE SPORTS FZ750 Two pieces in one kit would be second-rate as a Decal Kit.
I guess I could scan the Decal's SizeData and sell it on Yahoo!
I wish it was another $10,000 cheaper, so that's why the stars are what they are.
View detail
Volume drop is only slight.
When I bought a used BMW R1200S, it had a ZARD Silencer installed. At the time of inspection, the Motorcycle shop told me that the volume was a little too loud, so I changed it back to OEM. I had to change it back to OEM every time I had my car inspected, so I installed it for a trial run. It is not so much a change in volume, but just a little bit more "Large" sound. However, the after fire at ThrottleOff has been reduced, and the low speed and low RPM driving has become stickier, and the jerky feeling has been eliminated. I expect that fuel consumption will improve because I can run at one higher GEAR. View detail
Emblem Set
It is very well made, even though it is not OEM.
I guess because nowadays it can be made with a PC, Scanner.
But the price is high.
View detail
Volume control
I have a TricksterShotgun silencer installed on my MORIWAKIFull Exhaust System, but the regulations are getting stricter and stricter, so I purchased an inner baffle.
It was not easy to ride after installation, but I was finally able to see the effect of riding.
As for the effect, the volume seems to have changed a little, and I read that the Torque is increased, so I checked that as well when starting off, and I think it is effective because it is easier to start off Smoothly.
If I wanted to turn the volume down a bit more, I would prefer S over M.
View detail
I think there is almost no muffling effect …….
SCPROject's Full Exhaust System for MT-09 and XSR900, 3-Quantity:1pc. nick'70s installed on a EURO4 Spec. with Thailandco.
The mounting position will be right after the Thailandco Φ60 and the claws are up and snug, and I put in the S Wall Type, but measuring the Pipe, it looks like the W Wall Type will fit too.
I chose the SizeS because I thought the sound deadening effect would be large, but I did not feel that the volume became small from the characteristic of the exhaust system.
There seems to be Torque up, but I don't know the effect because I installed it without test driving after changing Exhaust System.
It's probably better than nothing because it's S Wall Type, but I put it in anyway, so I'm assuming it's effective and using it.
View detail
It's well made, but...
I used it for Tsukiji TR. It is possible to install it like Mr. Tsukigi's Included Parts:even if the nail for the fixation is not raised especially by pontification. I think that the volume is slightly down. (Idling) Low speed Torque is slightly improved (Start is easy) TR tube is explosive sound in the first place, but I wanted it to become quiet a little more. (When I replace the ZX with a good exhaust system, the Idling becomes unstable, but after installing the Baffle, it has calmed down a little. The high speed does not feel the influence so much even if it does not do the fuel tune setting. By the way, when End Baffle is installed, it is quieter than OEM. I am not satisfied with the high price though the production is good including welding. View detail
Automatic magic Inner baffle
I installed this on a ZZr1100 Mather assembly tube. Basically, it can't muffle the sound. However, it will increase the exhaust resistance, so it will increase the torque. Of course, high rpm will be sacrificed. View detail
It is perfect for those who want to reduce the sound a little. (especially bass).
I like the sound and style of the exhaust system of YOSHIMURA. I bought it to reduce the sound a little more to go to RidingSchool.
It is just for reference because it is the volume of the smartphone app, but Idling was 88.6→86.4db in the diagonal rear, and it was 103.0→98.5db in the side of the car body when it was blown to 5000rpm. The bass is cut, but the high rpm is clear and the sound is not muffled.
After replacing the exhaust system, I had to be careful not to stall the engine when starting, but now I have more room. Also, the jerkiness of the 5th gear at 45mph has calmed down.
Then, I was worried that my GSR750 had an individual difference, but when the engine started to rev down, it would start braking with a bang bang bang bang bang bang bang bang bang bang bang bang. Now it's calmed down and the embracing itself has loosened up.
Also, there's less AfterFire ya.
The price is high, but I am satisfied with it because I will probably never replace it.
View detail