Reviews
Crafting accuracy is not so good
There is a cut-out Sugar Crystal step near the shaft center.
This made me wonder if Large is sturdy enough.
Unlike Front, Rear is honestly not as effective.
I don't know. For this Gold amount, I should have gone with the KMT product for $57,000.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It works. It's just expensive!
One of my friends suggested that I change the shaft, and although I had no particular problem with it, I decided to replace it with a new, stronger shaft rather than continue to use the old one. I decided to replace the old shaft with a new one that is stronger than the old one.
[Axle Shaft]
Axle Shaft is a rod that drives the Wheel. The Axle Shaft plays an important role in supporting the Wheel so that the Wheel rotates around the Axle Shaft, and without the Axle Shaft, the Wheel would come off the axle.
[ASKULShaft's role]. ‥
◎Transmits the load input to Tire and Wheel to Suspension.
◎The Bearing, Distance Collar, and Axle Color at the hub of the wheel are integrated and fixed with the least amount of friction.
◎Brake Disc or Sprocket position is determined at the Center of Caliper or Chain line.
It's not just an iron rod. (^o^) /
Replacement of Axle Shaft
The effect that can be felt depends on the type of car and whether it is Front or Rear. 。 In general, the Front tends to increase the lightness of handling, and the Rear tends to make it easier for the suspension movement to be transmitted to the Rider, and the condition of the Tire, including the feeling of ground contact, to be easily understood.
→ I will try Rear!
What is Chromoly? ‥
The official name is Chrome molybdenum steel. Iron Combined Gold with a very small amount of Chrome and Molybdenum added to iron. 。 Specified to contain 0.1-0.5% carbon, 0.9-1.2% Chrome, and 0.15-0.45% Molybdenum 。
No change in strength even in high-temperature, high-pressure environments, and moderate "Shita" The material is used in bicycle frames, crankshafts, stabilizers, aircraft leg parts, etc., to absorb vibration due to its high strength and ductility.
[Merit to Chromoly]. ‥
(1) Rigidity is increased.
Axle Shaft is one of the rigid components of Suspension, so high rigidity and strength are required. 。 Always while driving "distortion" It is the only thing that supports the weight of the car body by receiving the large force from the wheel and suspension. 。
By reinforcing the suspension, the suspension is properly activated against external forces from the road surface during driving, and the tires are stably grounded to the road surface.
→ Improves straight line stability and minimizes yawing during corner rings.
Improved rigidity compared to the→OEMShaft, and increased front ground contact for improved cornering performance.
→Breaking is also more stable, as the back footing is more effective when breaking.
(2) Increased accuracy.
Except for a few special vehicles, production vehicles are limited by cost, and there are many areas in which compromises must be made. 。 The OEM Axle is also not as precise as we would like it to be, due to cost. Simply put, it is made finer than the original Size that we want to make. 。 On the other hand, the external ChromolyShaft is cost-effective and finished to a high degree of precision; the bearing, distance collar, and side color are all in perfect alignment, bringing it closer to the ideal structure envisioned by the developer. 。
The increased axial accuracy of the→shaft reduces Wheel rotation loss and lightens the push/pull.
Merit is all I have, the price is so high (laughs).
Replacement Procedure] It's easy... (;・∀・)
(1) Tire does not fall off (not on the ground) Lift to a degree.
Loosen the shaft fixing bolt on the Right Side with a wrench.
Loosen the Axle Shaft from the Right Side.
Loosen the fixing bolt on the Left Side.
(5) Remove the shaft nut and pull out the shaft.
Effect after replacement ‥
◎The rigidity of the undercarriage has been increased, and it is easy to feel the sense of gripping the tire, giving the driver a sense of security.
◎Because the body behavior is settled, effective Brakes that stop short are possible. In other words, less flexure and more stability than OEM.
◎The rotation of Tire becomes lighter and easier when pushing and walking.
The most obvious was at low speeds. No wobble when starting or stopping. 。 I think this is a large advantage for low-displacement vehicles that cannot use high speeds.
View detail
well
Following the Front
Rear was also replaced.
NORMAL605g
Chromoly420g
I look forward to a test run later in the day!
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100
I thought it was just a stick.
I put it on a ZEPHYR750 with GALE SPEED wheel.
First of all, I felt the lightness when I straddled it and backed it out of Garage.
Next, Curve driving
I think it is because my Motorcycle has been converted to 18Inch.
It was the kind of Motorcycle that Curve would not turn!
Of course, if you shift your buttocks in a Large gesture, it will bend.
I was a little frustrated.
I changed to this product and ran it.
Curve has become curved and
The test let go of the Curve before the test and
When the Curve is bent, the Handlebar is also bent naturally.
It was a very good Fee Ring.
And it's very light compared to OEMWheel.
Wheel feels very light in the front.
It was too good to be feeRing.
I'm even ordering for Rear!
Maybe it's because Machine is old and I feel like it's too much.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100
Chromoly Axle Shaft
I installed it on my ZEPHYR750, and to be honest, I was skeptical about it, but as soon as I installed it, I could see the difference. The stability is much different, and I can feel it is stable even on undulating road surfaces. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
person who does the work behind the scenes
I bought it based on other people's impressions. I was quite resistant before I purchased it, and haDrill to say, this price for one stick! View detail
so-so
I wanted to try ChromolyShaft because of its reputation and bought it with half a doubt. Unfortunately, I don't feel any lighter when I handle it. After installing the ChromolyShaft, I drove around the neighborhood and I can feel that the front is firm and the snap is firm. Certainly, there is a sense of firmness in the brake as well. It may be necessary to set the Fork as it also picks up the road surface condition. I think straight line stability has improved. The installation will require a 30Socket or Glasses Wrench as the Bolt will be installed through the OEM hex hole. The Fork was leveled before installation. Straight line stability is improved because of the leveling. As a side note, the service manual for the ZX12R states to jack-up the Oil FilterBase when raising the Front, but it is very unstable. Use a solid tool. Also, I have installed Babyface's Slider on the front, but since the shaft is now a bolt type, the Slider sticks out strangely to the right. It is not a problem in terms of functionality, but it is somehow not cool. Also, the surface treatment of the shaft is weak, and it peels off just by attaching it with a socket, which is unfortunate. The instruction manual is not very good. The instruction manual is not good, it's too muddy to read. View detail
Rumored ChromolyShaft
'88MODEL with Vmax.
Most people say it's good, but honestly, does it really make that much difference? I was skeptical about whether I would be able to experience it myself. I was skeptical, but it was a drastic change.
I was hesitant to pay such a high price for a mere Shaft1 pc, but considering the fact that it is made by craftsmen under strict control and the drastic changes more than the Gold price, I was more than satisfied with this product! The slight vibration is eliminated, and the original work of the tires and suspension can be understood and the behavior of the car becomes more straightforward, so even if you don't drive on a mountain pass, you can feel the difference when driving on the street or even when pushing the car around.
View detail
Change…… … None?
I changed the shaft of TRX850's pipod. When I was servicing my trx850, I often found that the split pin hole caused the screw threads to lick even though I was tightening the screws normally. I bought this as a countermeasure for that, so I don……t know about Chromoly or anything like that. However, since I used OMEGA for the Grease used when replacing it, I felt the movement was good. It is moving flexibly with suspension! It feels like it is moving smoothly. It may be my imagination, but since there are no more OEM parts, I am very grateful for this kind of parts. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It works pretty well.
I had seen good feedback on the Pivot shaft, so I decided to go with the Chromoly.
When I banked at a certain speed, I could feel the body of the car swaying, but when I added the Chromoly Shaft, the swaying of the swing arm disappeared and the rigidity increased.
The Winding is now more stable at higher speeds and very enjoyable to drive.
It may be a bit of an exaggeration, but it's as if you've replaced the Swing Arm with a more rigid one.
View detail
Fits: KAWASAKI ZEPHYR400χ [Zephyr]., KAWASAKI ZEPHYR400χ [Zephyr].
Bolt in one.
Bolt is also a Large cutaway Parts.
How can a single shaft change the rigidity of a vehicle? But I bought it with expectation.
Simply replace your existing ASKULShaft.
Effectively, it's antsy.
Thanks to the suspension being fixed firmly, the Suspension will be able to do its job well.
good point
Simply replace the existing Shaft.
It's Chromoly, so it's durable.
The suspension moves nicely because it is fixed firmly. I think you can feel the difference with OEM suspension as well as external.
A bad point
The frame is fixed, but the frame is firm, so it may be hard to ride comfortably.
Even one bolt can contribute to the rigidity of the vehicle, so I think it is a very interesting part.
View detail
You're wasting your time waiting.
Three point Quantity:I ordered a set, but it took too long for the manufacturer to get back to me with the delivery date, so it was a waste of time!
Even if the thing is good, it's too bonkers as a BUSINESS with no interpersonal kill.
I bought three items at Vito's and the price was cheap and they looked Parenthesis good!
What I want to say is that this Manufacturer's website is difficult to read, so I think it should be changed.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Rear stiffness can be easily increased.
I've been noticing some sagging in the rear of the car when embracing, so I've been retightening and adding a washer, but to no avail.
Because it says that there is ASKULShaft of Reinforcement Type, I bought it.
good point
Just replace with OEMASKULShaft.
It's very stable around the rear. ●Embracement is applied beautifully.
Because the extra movement is suppressed by the ASKULShaft, the movement of the rear suspension also becomes better.
A bad point
It's quite high.
Yes, it is expensive. But if the rigidity of the car body is increased so much, I think it is cheap.
Maybe you can feel it even if you change only ASKULShaft in all NORMAL.
I really recommend it.
View detail
Does Manufacturer have any intention of selling it? It's just a private shop.
Manufacturer's Response is poor.
Manufacturer's Homepage is also hard to see.
There are many products these days that are cheaper than this one and look beautiful.
View detail
Very good product.
First of all, I was a little impressed with how light it was out of the box and held. The texture is different from the NORMAL. The difference between the NORMAL and the CUSTOMER is that the customization has improved and I love it more. As for the impressions after driving, the response from the entrance of corner is stable and light and it seems to be easy to feel the ground contact of the tire. I think it came to be able to turn well. View detail
Good product
I was worried about how much I would experience the difference from NORMALShaft. Because it is an expensive purchase for me, I thought I would regret it if I did not know the difference. When I replaced them, I felt like I could feel the firmness of the road surface a little more easily. I feel that the corner is easier to turn. It's an expensive part and it makes me feel better. View detail
Good product
I was worried about how much I would experience the difference from NORMALShaft. Because it is an expensive purchase for me, I thought I would regret it if I did not know the difference. When I replaced them, I felt like I could feel the firmness of the road surface a little more easily. Also, the rigidity has gone up so you can ride more stable. It is an expensive part and it makes me feel good. View detail
You can see changes soon
After buying and installing in front and back, I realized the difference clearly just by pushing. It became very light. Since Cornering may cut too much until it gets used to it, only that attention. View detail
Products of this hand have an effect in the ground
【What made you decide the purchase?】
I have not changed only Front
【How was it actually used?】
The product of this hand feels an effect in plain
【Was it difficult to install? (Hard parts case)】
From the experience of changing another Motorcycle before installation
Maintenance Standetc. The person who does not have to purchase at the same time! Although exchange of things is not so difficult, it is safe if you asked Shop to those who do not have confidence about suspension relationship
【Please tell me the point of installation and hang (in the case of Hard parts)】
STANDetc. Same as the above answer
[Is there anything I was disappointed about?]
I wanted you to enter the product until Nut instead of using pure STD Nut
【Hope for Manufacturer ? Please let me know if there are any improvement points]
I would like to have genus with with Nut
【Have you compared items?】
I am using Vito at gs1000 I can not find it with Vito I purchased it here but I think it is the correct answer
[Others]
After all three points change is Recommendation In that case the price will be quite expensive! If the price is cheaper a little more!
View detail
Whether the construction is beautiful, understandable person understands.
I first installed it in the 2006 GSXR 1000 Front. I realized immediately that the handling became lighter and the rigidity increased.
For about a year I got on as it was and when I replaced Pivot, Rear axle shaft for Chromoly, I think I gained a sense of unity.
First of all, I think it would be good to exchange Rear after replacing Front.
View detail