Reviews
I wanted Black!
This is great! It's a bit of an accent. View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
I'm glad I bought it!
I wasn't sure whether to buy it, but, I'm glad I did! ♪ (??????) ♪ View detail
Purchased for dropout prevention
M8Nut is used to fix a self-made Handlebar, but there is a possibility that an ordinary nut may loosen, so we purchased a lock nut that does not loosen.
Bolt used a hand-held anti-theft Bolt, which was both anti-theft and dropout-proof.
I would buy again if the opportunity arises.
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
Posh sprocket cover
The cover was delivered very well packaged,after unpacking it you could tell it was well made and good quality,fitting this item took 45mins from start to finish and it looks great View detail
No sense of retrofitting
Since the frame is black in color, there is almost no sense of retrofitting. We expect the rest to be durable against paint peeling, etc. View detail
BlackScrew
I purchased this to install a GIVI Top case. It looks tighter. View detail
You're hurting me, so be gentle.
External Swing Arm is installed on CUB90.
Quantity to produce Center of Rear:Pair (for Left and Right) is being adjusted in color. At first, I used Honda's OEM product for adjustment. After I started to touch and feel the need for more adjustment, I purchased Posh's Universal Collar. This time, I used 1mm for fine tuning.
The color we received has a beautiful Aluminum Cut-out finish. The length, thickness, and beveling are Large sturdy. I don't know about the distribution of materials, but it looks good. It is nice to see something good. This time, we have a quantity of different sizes.:2pc. Set was purchased and used. I also modified the collar for installation. I did not find any particular problem after the modification. I have no problem with this.
As a precaution, if you accidentally drop it during installation, Material:Aluminum is more susceptible to scratches than steel, and when inserting the wheel into the swing arm, the collar rubs against the arm and scratches it. Aluminum collars require more careful work than steel collars.
Posh offers a variety of colors, and the O.D., I.D., and thickness are all very neat. I have no problem using them as wheel collars for CUBs. aluminum is lighter than steel.
View detail
Ideal for small adjustments
I bought a battered 900SS (900SL) and am Restore.
The frame was not bent, but it had a history of falls. After restoring and reassembling the frame, it was discovered that the Right Footpeg Holder was slightly inside the body of the vehicle.
The Frame had already been painted, so it was impossible to correct it now.
It is not an easy place to turn in the first place, and the correction is extremely difficult because the turn is really very slight.
I thought about installing an unnecessary footpeg and forcibly bending it back by sticking an iron pipe into it, but the footpeg holder part is integrated with the seat rail, and that seat rail is integrated with the main frame.
When I corrected the footpeg bend, it seemed that the bend would appear in an extra part (probably the seat rail section), so I decided to swing the footpeg plate outward with a collar in between, which is a bad idea.
The color used this time is a mere 2mm, so there is zero discomfort associated with wearing it.
It doesn't bother me at all
And the gap between the Swing Arm and the Swing Arm is now about 3mm in areas where the gap was almost Zero.
I wondered whether I should choose the slightly more expensive Black Anodized Aluminum color, but it was a Large decision to go with the Silver color (no Anodized) since the location is relatively visible while parked.
We succeeded in Offsetting by 2mm with almost no noticeable difference.
The color material also seems to be a hard material, not just raw aluminum, and there is no sign of deformation even when sandwiched between the M8 Bolt's Large Torque.
This should eliminate the need to buy expensive parallel Washers in most places.
View detail
License Plate is cool.
I am very pleased with the new License Plate and think it looks great. I think it is worth the price. View detail
What are the effects, not just the appearance.
Just by putting it on a normal tank, it can be easily transformed into a cafe racer style.
The effect on the appearance of the product is extremely Large, but there are other Large effects as well, so let me introduce them to you!
Originally, Tank Cover is a product to cover tanks, which was born out of the European motorcycle culture.
With a wide range of color variations, this is the perfect makeover for your car.
What does it mean to put a Cover on a Motorcycle Tank? A Cover attached to a tank is not exactly "Tank Pad These items are called "tanks" and are mainly used to prevent scratches on the tanks. They are also sometimes used for a dress-up effect.
Effects of each.
The most important reason for installing the Tank Pad is to prevent scratches on the tank, which is often caused by rubbing against the Zipper, Belt Bracket, Jeans, etc. The area that comes in contact with the Rider's crotch is often scratched. 。
The rear end is raised in a large size, and the forme with a good edge improves the hold of the inner thighs and the machine in the hanging on posture, etc., and realizes more aggressive machine control. This means that the Knee grip is easier and machine control is improved.
It is effective for forward leaning vehicles such as Continental handle and Separate Handlebars.
(3) By attaching the Tank Pad to the tank, it prevents the tank from being scratched and prevents it from slipping, making it even easier to get a good grip on the knee.
good point
The tank is simply placed over a normal tank, and the fueling port hole is also intact, making it easy for beginners.
The shape of the lower part of the tank cover has an egri, which makes it easy to get a good knee grip. It also has a dress-up effect.
(3) Just put it over the Normal tank, so if you miss the Normal tank, just take the Cover.
(4) Of course, it can also prevent scratches on normal tanks.
? Effective in preventing slipping when used in combination with Tank Pad.
As a result, it is more cost-effective than replacing the tank with an aluminum tank or an external tank, because it can improve the press-up and machine control while keeping the normal tank.
I am glad that the knee grip is easier than it looks, as a lightweight motorcycle is ideal for a person and car as one.
I painted mine, but I think it would be cool to put a sticker or something on a plain black one.
View detail
To prevent deformation of the Footpeg Holder fixation area
I bought a battered 900SS (900SL) and am Restore.
There was a history of a fall by a previous owner, and although the frame was not bent, the footpeg holder was slightly bent and tilted inward, and when the right footpeg was attached, there was only 2mmm clearance with the swing arm....
Leftfootpeg has a Clearance of about 5mm, so I purchased this collar to be inserted between the Footpeg Holder and Frame to ensure this Clearance.
Separate Quantities:Pair (for Left and Right) The gap does not have to be aligned at 2mm, but 2mm is indeed too narrow....
There are cheaper aluminum collars, but those cheap ones are made of the same soft raw aluminum material, not parallel or anodized....
The base of the Footpeg Holder is a part that is subject to large forces, and it is a part that can be seen to the fullest extent.
Material is not specified, but looking at the coloration of Anodized, I wonder if it is in the 6000 range?
It feels like a round bar of extruded material that has been machined.
Perhaps we did not dare mention the Material name because we could not use a good sounding name such as Duralumin or Super Duralumin.
But if it's in the 6000s, it's rather wishful thinking.
Exactly for use in external visible positions due to its high corrosion resistance.
Of course, unlike cheap products, they are very hard and will not deform or crack even when tightened with an M8 bolt.
Small items such as these tend to focus only on cost performance, but it is only natural that good items are expensive.
If you procure colors from Home center for cosmetic reasons, they are bound to be white, powdery, and shabby in a year's time.
For those who think that the most important thing is not the price in the immediate future, but the ability to remain solid for several years to come, the Quantity is a small fraction of the price of the original product.:2pc. This product, which is available from Set, is convenient and geeky.
View detail
For Pedal adjustment of homemade footpeg
I purchased this as a Material to create a 900SS (900SL) footpeg.
If you want a footpeg that has a bearing on the pedal axis, is coaxial with the footpeg, and does not have an extreme up or back position, the only decent footpeg left is the AELLA 900SS footpeg made by Kasuno, except for those made overseas.
Then why not just buy AELLA? I would say, but AELLA boasts gorgeous cutting and looks too flashy....
We had no choice but to use a footpeg (Position, stiffness, sobriety, all good) that was sold by GARUDA, but unfortunately it was already discontinued.
In addition, the GARUDA-made footpeg has a special eccentric footpeg receiving structure, and the pedal receiving part is made of POM resin material.
Even if the bearing is not a Bearing, there is no problem in operation, but the rigidity of the Bearing type cannot be beaten.
The problem with the Largeest is that the method of connecting the Footpeg is special and requires a Φ17mm eccentric Aluminum Footpeg.
Of course, Footpeg is also out of stock and cannot be repaired in the event of a fall.
Therefore, we decided to use only the holder part of the footpeg (obtained secondhand) and to modify the footpeg to the Φ8mm bolt coupling type commonly used by other companies, so that the pedal can also be mounted coaxially.
Prepare a bush that fits in the Φ17 section effectively, drill an M8 screw hole in the center of the bush, and fix the bolt so that it is tightened together with the footpeg while sandwiching the bearing of the pedal.
...Then, in the pedal section Bearing, the inner race and outer lace end faces are flush with each other, so the pedal locks up.
To prevent this from happening, a Spacer that only contacts the inner race part should be inserted......so this Washer or Shim was selected.
What you need is Bearing's Quantity:Pair (for Left and Right) To Quantity:Quantity in 1pc. each:1 Set of 4pcs., so there are 6 extra sheets, but that's OK, you may use them for something else sometime!
Shim thickness can be selected from 0.1mm, 0.3mm, and 0.5mm, but this time 0.3mm was used.
We wanted to reduce the gap as much as possible, so we wanted to use 0.1mm, but we didn't want to have it contact when the entire weight was on it and it was bent, so we used 0.3mm with a little bit of leeway.
If you are aiming for limit, there is a te to adjust by overlapping 0.1mm shims, but I decided not to use multiple shims because they are troublesome when servicing.
But on second thought, 0.1mm might have been better since I don't disassemble footpeg frequently.
0.It is better to overlap 1mm to 0.2mm gap because it should be Cool with gap Limit.
At any rate, 0.3mm is OK because it does not feel too governor!
It is not a part that requires extremely high precision.
I think it would be ideal for something like a playful take on "Lever".
View detail
Fits: KAWASAKI Ninja250, SUZUKI GSX250R, KAWASAKI Z900RS CAFE, KAWASAKI Ninja400, KAWASAKI Z900RS
For NINJA400/250
KAWASAKI NINJA400/250 has the boss of Swing Arm deep, so it is necessary to stop the Rear stands hook. TAGUCHI MFG. (TaGu) I will include a photo of the :109001 Stand Hook in use. View detail
License Plate Protection
I purchased this to protect my License Plate and it fits my License Plate perfectly without any size problem. View detail
Easy search
It is easy to search for the parts I need. View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11
The FrontSprocketッs easier to clean and has a better texture.
Cleaning around the front sprocket is easier and always cleanable.
Texture and Cost performance are good.
View detail
Started to hear strange noises from the Number.
It was easy to install, but because the Seat and the Seat are co-tightened together, the Seat almost falls off every time I remove it. Also, after installation, I started to hear a chattering sound from Number, so I put Epu and Sealer on Number to counteract the sound. View detail
There are many color variations.
[How is it used?
I replaced the bolt and washer that holds the exterior of my KDX220SR with DRC's Aluminum Spacer for M6, and I really like the way it looks. However, I wanted to change the aluminum washer to a Green Light type to match the Lime green exterior, and since DRC does not have Green Light, I went to Webike and looked for another manufacturer's product and found this one. "Lime green." purchased
Was the one you received as per Image?
Compared to the DRC model, it is a little taller and smaller in appearance, but the design is along the same lines.
Since they are not used side by side next to each other, it is not a concern.
At the time of purchase, the price was 990 yen for a package of two, which is relatively expensive compared to DRC-made products.
(DRC products are available in packs of 4 for 782 yen and up.) The product was exactly as shown in the Image.
Was the installation difficult?
There is nothing difficult about this product, which is installed by biting it in place of a washer when fixing the bolt.
How was your experience with it?
Like the Aluminum Collar of today, this color can be used on Bolts with heads of 10.5mm or less in diameter, so it is highly universal, and the impression of the appearance can be changed depending on the Bolt head design used. The appearance can be changed depending on the BoltHeadDesign and Sense.
The coloring of Anodized is also vivid, and I will continue to use it and see how it fades due to UV rays.
[Included Parts:were they on?
None
The product has 13 color variations, so I think it will fit the image of large-bodied people.
[Was there anything that disappointed you?
I like the look of the product and I am not disappointed with the purchase.
As there are Anodized products The colors are not what I saw in the pictures." If possible, it may be safer to check the actual product at a motorcycle accessory store before purchasing.
The color I purchased this time is "Lime green." But...
Due to the nature of Anodized staining Candy Lime Green The color is very similar to the color of the original.
Other items that would be helpful
Point and hang of installation
As mentioned above, this is a fashion color used in place of a bolt washer, so it is a simple job to use this product (Aluminum Collar) when attaching a cap bolt of the appropriate length to the bolt stop on the part where it can be attached.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of use is top level, so I don't think it's likely to be used incorrectly.
[Notes]
It's been around for a while. FUJI TSUBO TYPE color." The outer diameter is larger than that of the "L", so please check if you want to install it on an exterior that has a depression.
[ITEMS TO BUY TOGETHER
As mentioned above, please purchase a bolt to match this product. Please consult with your wallet before purchasing.
[Opinions and requests to Manufacturer
This variety of color variations is quite attractive, please continue to sell as much as possible.
View detail
FashionParts
Parts have been around for a long time and are used in a variety of ways.
[How is it used?
Silencer Fixed
Was the one you received as per Image?
Image itself
Was the installation difficult?
It was so easy that I was surprised.
How was your experience with it?
Parenthesis has improved very much!
[Included Parts:were they on?
It came with an outer bag.
[Was there anything that disappointed you?
None at all.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Osha cosmetic lid
Osha's Cap that has been around for a long time.
[How is it used?
In Bolt's Cap on Silencer Bracket.
Was the one you received as per Image?
Image itself
Was the installation difficult?
It was so easy that I was surprised.
How was your experience with it?
It was great and Parenthesis is good.
[Included Parts:were they on?
It came with an outer bag.
[Was there anything that disappointed you?
None at all.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail