Reviews
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF-SP
Purchased for protection in the event of a fall
I bought it in case of emergency.
However, the product I received was scratched and the plating was peeling, so I contacted the manufacturer directly to have it replaced.
I ended up removing it because I was worried that I would not be able to remove the Crankcase Bolt in the event of a fall.
View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Maintenance Stand and Dress-up as well.
I purchased this product to use to stand a Maintenance Stand.
We decided to purchase the product because of its affordable price compared to other companies and the fact that it is a trusted Posh.
The design has good parenthesis, and the anodization is beautiful.
The surface of the STAND is scraped off after standing on it several times, but this is not a particular complaint as it is an unavoidable part of the product's characteristics.
I think it is worth buying even for one point dress-up purposes.
View detail
Fits: BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX250R, SUZUKI GSX1300GSX1300R HAYABUSA, BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Good sense of unity!
I purchased this for my Roller stand.
The color is the same as the color of the original.
View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
usually
Very normal, just as I imagined. I don't have STAND, so it's just for decoration. View detail
Fits: BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX250R, SUZUKI GSX1300GSX1300R HAYABUSA, BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Purchased with Maintenance Stand
I purchased the V-receiver for the Maintenance Stand and bought it together.
Since the bar end was Posh's, I chose the same Manufacturer.
I thought the color was the same, but is it slightly different? Is it the light or my imagination? It may be hard to tell from the photo, but I'll put it up just in case.
View detail
The finish seems to be a bit of a mess….
The product is for SR, but I bought it to divert it to another car model.
I decided on this product because it is processed with a long hole and the height of the stopper seems to be adjustable, but I have to say that the processing is very crude.
The treatment of the long hole is also terrible, but there is also a Gap between the top and bottom holes. With this Level, I should have gathered the components and fabricated it by myself.
View detail
having an effect
The GuardBody had been scraped to about half its thickness on the lower part, but there was no damage to the EngineBody thanks to the Guard being installed. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R, KAWASAKI ZX-12R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZX-10R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI ZX-6R, KAWASAKI NINJA250, KAWASAKI NINJA250R, KAWASAKI Z250, KTM RC250 (KTM)
It looks good Gold color
Is a spacer used, is the bolt longer or shorter? There was no Instruction Manual, so it was difficult for a beginner to understand. View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
usually
There is no problem in STANDing.
It has quite a presence, so it could be a dress-up piece.
View detail
Chosen by Cospa.
It is not noticeable with the backdrop, but it is not curvy and floats a little, so it may not be suitable for those who are concerned about it.
ScrewQuantity for installation:Easy to attach by simply removing 2pcs.
If you can avoid the cost of repairing a broken Radiator for $7,700 and not being able to run on your own, it's a small price to pay.
View detail
Fits: BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX250R, SUZUKI GSX1300GSX1300R HAYABUSA, BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
It's solid.
It is solidly built and has a luxurious feel.
When going up with STAND, it would be better to use a scratch-prevention curing.
I highly recommend it, cool shape too!
View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Excellent color variations and cosmetics
Purchased for use with the Racing Stand, the price and the large number of color variations were decisive factors.
The feel is quite normal, and VHook's Racing Stand can be used without difficulty.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R, KAWASAKI ZX-12R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZX-10R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI ZX-6R, KAWASAKI NINJA250, KAWASAKI NINJA250R, KAWASAKI Z250, KTM RC250 (KTM)
finally, an exchange
I had been using a homemade Hook, but the paint was peeling and it looked bad, so I wanted to replace it with a proper one for several years.
I prepared a maintenance stand for the zrx1100 soon after I got the motorcycle because it did not have a center stand, but I did not find a hook that I liked in terms of price and shape at the time, so I made one myself by combining m10Bolt, Seat Gold, etc. I was using it with an object attached to it. The paint started peeling off a few minutes ago, and I was thinking of repainting it because I was getting concerned about its appearance, but then I came across the Timing I had considered buying a J-Trip Hook several times because of its relatively low price, but I prefer the shape of the posh one, so I think I made a good purchase. This product is BodyQuantity:2pc. Set and m10Bolt long objectQuantity:2pc, short onesQuantity:2pc、SpacerQuantity:2pc. Quantity of Set:I installed the Right Side with Spacer and the longer bolt, and the Left Side without Spacer and with the shorter bolt, considering the protrusion of the bolt.
I am very happy with the color, which I like, and it looks much better than before. Functionally, I was able to hang the maintenance stand without any problems, and I did not feel particularly uneasy when lifting it up. However, the Wound seems to get in as much as it is used, so there will eventually come a time when I will be concerned about its appearance.
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF-SP
I recommend it!
I bought it for when I was standing up and stumbling.
To install, simply remove the Bolt from the bottom of the Engine, install the Guard, and tighten with the Bolt and collar from Included Parts:.
The work itself is easy, so even beginners with tools should have no problem.
Then, after a while, he unexpectedly stood up and stumbled.
The result was that this protected the Engine with flying colors.
Naturally, there are scratches on the Guard, but the Engine is intact.
I am really glad I installed it.
Originally it had Red color on it, but was replaced with Gold color when it was scratched.
The price is not cheap, but considering the high price, it is not expensive (personally).
It can be used in combination with the Engine Guard, which is a type that is attached to the frame, so if both are attached, it is a good idea to combine protection and dress-up.
For those who have not yet installed it, we highly recommend it.
View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Nice color
I don't have a STAND yet, so I don't have a practical feel for it.
It looks perfect.
My husband and I ride NINJA, and this is mine.
View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Good vibes
I don't have a STAND yet, so I don't have a practical feel for it.
It looks perfect.
This is my wife's NINJA.
View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
To hang Maintenance Stand
It is a necessary part to receive the Maintenance Stand with the V receiver.
NINJA2 Helmet50R/400 (2018〜) needs Stand Hook Spacer separately, so
Let's buy it together!
Use the screw locker to fix it firmly.
There are 12 colors to choose from, so it's one point and Fashion!
View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
For Maintenance.
I installed it to hang my Maintenance Stand!
One point added and it looks great!
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF-SP, HONDA CB1300SB, HONDA CB1300SF
CB1300SF SC54 2018MODEL Engine Guard
This is a great looking and easy to install Engine Guard that will protect your engine in the event of a fall. View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
To improve the maintenance of ZX-6R
What made you decide to buy?
To improve the serviceability of the ZX-6R!
How was your experience with it?
This is the part that securely holds the Racing Stand when servicing the ZX-6R.
The hard anodized treatment is applied, and you can choose the color that suits your car from 11 colors. I think this is one of the parts that makes you feel Sense.
My car, 2021 ZX-6R, was M8. By the way, there are some Kawasaki models where the mount part is deeper than the surface of the swing arm, but I was able to install the 2021 ZX-6R without the need for a spacer. When installing, apply the screw lock agent and tighten with M8 Screw Torque.
I haven't actually used it yet, but I wonder how long the hard Anodized Treatment will last when the Racing Stand is applied? That's the question for the future!
View detail