Reviews
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Maintenance Stand and Dress-up as well.
I purchased this product to use to stand a Maintenance Stand.
We decided to purchase the product because of its affordable price compared to other companies and the fact that it is a trusted Posh.
The design has good parenthesis, and the anodization is beautiful.
The surface of the STAND is scraped off after standing on it several times, but this is not a particular complaint as it is an unavoidable part of the product's characteristics.
I think it is worth buying even for one point dress-up purposes.
View detail
Fits: BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX250R, SUZUKI GSX1300GSX1300R HAYABUSA, BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Good sense of unity!
I purchased this for my Roller stand.
The color is the same as the color of the original.
View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
usually
Very normal, just as I imagined. I don't have STAND, so it's just for decoration. View detail
having an effect
The GuardBody had been scraped to about half its thickness on the lower part, but there was no damage to the EngineBody thanks to the Guard being installed. View detail
Chosen by Cospa.
It is not noticeable with the backdrop, but it is not curvy and floats a little, so it may not be suitable for those who are concerned about it.
ScrewQuantity for installation:Easy to attach by simply removing 2pcs.
If you can avoid the cost of repairing a broken Radiator for $7,700 and not being able to run on your own, it's a small price to pay.
View detail
Fits: BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX250R, SUZUKI GSX1300GSX1300R HAYABUSA, BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
It's solid.
It is solidly built and has a luxurious feel.
When going up with STAND, it would be better to use a scratch-prevention curing.
I highly recommend it, cool shape too!
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF-SP
I recommend it!
I bought it for when I was standing up and stumbling.
To install, simply remove the Bolt from the bottom of the Engine, install the Guard, and tighten with the Bolt and collar from Included Parts:.
The work itself is easy, so even beginners with tools should have no problem.
Then, after a while, he unexpectedly stood up and stumbled.
The result was that this protected the Engine with flying colors.
Naturally, there are scratches on the Guard, but the Engine is intact.
I am really glad I installed it.
Originally it had Red color on it, but was replaced with Gold color when it was scratched.
The price is not cheap, but considering the high price, it is not expensive (personally).
It can be used in combination with the Engine Guard, which is a type that is attached to the frame, so if both are attached, it is a good idea to combine protection and dress-up.
For those who have not yet installed it, we highly recommend it.
View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
To hang Maintenance Stand
It is a necessary part to receive the Maintenance Stand with the V receiver.
NINJA2 Helmet50R/400 (2018〜) needs Stand Hook Spacer separately, so
Let's buy it together!
Use the screw locker to fix it firmly.
There are 12 colors to choose from, so it's one point and Fashion!
View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
For Maintenance.
I installed it to hang my Maintenance Stand!
One point added and it looks great!
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF-SP, HONDA CB1300SB, HONDA CB1300SF
CB1300SF SC54 2018MODEL Engine Guard
This is a great looking and easy to install Engine Guard that will protect your engine in the event of a fall. View detail
Fits: BMW S1000R, BMW S1000RR, KAWASAKI Ninja250, KAWASAKI Ninja400, SUZUKI GSX250R, BMW S1000XR, HONDA CBR1000RR, KAWASAKI ZX-10R, KAWASAKI ZX-25R, SUZUKI GSX-S1000F, SUZUKI GSX-S1000S KATANA, SUZUKI GSX1300GSX1300R HAYABUSA, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
To improve the maintenance of ZX-6R
What made you decide to buy?
To improve the serviceability of the ZX-6R!
How was your experience with it?
This is the part that securely holds the Racing Stand when servicing the ZX-6R.
The hard anodized treatment is applied, and you can choose the color that suits your car from 11 colors. I think this is one of the parts that makes you feel Sense.
My car, 2021 ZX-6R, was M8. By the way, there are some Kawasaki models where the mount part is deeper than the surface of the swing arm, but I was able to install the 2021 ZX-6R without the need for a spacer. When installing, apply the screw lock agent and tighten with M8 Screw Torque.
I haven't actually used it yet, but I wonder how long the hard Anodized Treatment will last when the Racing Stand is applied? That's the question for the future!
View detail
Before you get upset...
I installed these on a 2017 GSX1300RHayabusa.
important item
[Was there anything that disappointed you?
The Engine Guard itself has quite a bit of Edge, so I was disappointed that the vibration of the Engine would probably scratch the Cover.
It would have been nice to have a little more Space or some kind of buffer material such as Urethane instead of a pita position.
In my case, once the curing Tape is pasted on the part where it is likely to contact.
Also, to be honest, I'm not sure if this would be a good engine guard in case of a fall.
The thing itself is fixed with a few screws of about 6mm, so I have the impression that it could easily break.
It's just a question of whether you can guard against scratches to the Engine when you take it down slowly. This is the degree.
Do you have any wishes or improvements you would like to make for the Manufacturer?
As mentioned above, I would like you to include thethaneTape for attaching to the part that interferes with the body, or add a spacer.
[Do you have any products to compare it to?
AGRAS:AGRAS Racing slider
https://www.webike.net/sd/9646109/
What about DURACON? But I thought POSH is better in terms of texture and price, so I bought it.
However, DURACON might have been a better choice for the above reasons.
Frequently Asked Items
What made you decide to buy?
I bought this to install on my GSX1300R Hayabusa 2017 to hide the scratches I get when I hit the ground.
If you have a Second Type Model (2008 or later), you can install it.
ScrewQuantity for installation:It is very easy to work with as it only requires 2pc and can be installed in less than 10 minutes.
How was your experience with it?
The product is so well made that it could have been OEM.
If you can reduce standing scratches for about $8,000, it's a cheap buy.
Was the installation difficult?
It's very easy.
Simply remove the corresponding Screw and install the supplied longer Screw.
【Please tell me the installation point and hang】
If you put this product on the place where you want to install, it will be easy to know which screw you need to remove.
[Was the Instruction Manual easy to understand?
It was the bare minimum.
[Included Parts:were they on?
Not particularly
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF, HONDA X4, HONDA X4, HONDA CB1100
I hope it doesn't have a feature!
I don't think this will be enough if you really fall over. I think it's better than nothing. I used to have a D's Skit Pad, but it got in the way when I replaced the Radiator hose, so I put this on. It was no problem at all. View detail
Just enough to cover up the scratches from when you're standing there.
It hides the scratches just fine when you've been standing on it.
I like it because it's Black and it doesn't look bad.
This is a Bolt replacement color addition, so it can be easily installed by removing and attaching a few Bolts.
View detail
Fits: HONDA X4, HONDA CB1100, HONDA CB1100, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA X4
I quite like the texture
It was originally the same one, but it was scraped off by the fall, so I replaced it with a new one
It is easy to install, but I am a little worried about oil leakage because you have to pull out the bolt to
You can install it quickly because it won't leak as long as you don't apply strange pressure with the Bolt out Recommendation
View detail
Fits: HONDA CB1300ST, HONDA CB1300SB-SP, HONDA CB1300SF-SP, HONDA CB1300SB, HONDA CB1300SF
Buy with Crank cover scratch prevention
We painted Crank cover in the same color as the Engine head, so standing etc.. I bought it for scratch prevention by.
We have selected Titanium color. Once installed, I like the color well well.
View detail
Pretty good
Unfortunate Wound Purchase for hidden. Easy to install, it also has a car body color with no sense of incongruity in particular after installation. I regret that I should have installed it before it became a pity. I think that it is a good product. View detail
Fits: HONDA X4, HONDA CB1100, HONDA CB1100, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA X4
Posh engine guard
Excellent protective element of very fine manufacture. In addition to being functional, it embellishes the motorcycle with a high quality product Excellent protective element of fine manufacture. In addition to being functional, it embellishes the bike with a high quality product (Translated by google translation) View detail
Looks like Tough has a sense of security for that
I bought it because Point was saved.
Since it is becoming an old motorcycle, I attached it considering the supply of parts in the future.
I am concerned a little a little, but I can not see it while riding, so let's do it again. - - -.
I think the making is robust.
No problem with mounting accuracy.
I will be careful not to take care of me!
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF, HONDA X4, HONDA X4, HONDA CB1100
It can be installed easily!
It is only posted on Honda's OptionCatalogue and I think it's a sure thing to make.
For installation, loosen the OEMBolt and tighten together the supplied Bolt and Color.
You can choose your favorite color with plenty of Anodized Color.
It is a good custom part combining practicality and Dress-up.
View detail