Reviews
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
1.0
Even though Pin is too thick to cut the hole on the Tank side, Cap does not open at all after installation. The lowest item. I can not use it because it will not open unless I hit it with Hammer. Just a waste of gold. I want you to return it gold. View detail
AXLE BAD FIT! Chromoly Axle Shaft
TERRABLE FIT - THREADS ON EACH END TOO SHORT, WASTE OF MONEY!! THIS IS THE FIRST TIME I HAVE HAD A BAD ITEM FROM WEBIKE, I HOPE FOR A REFUND. View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
The gap is terrible
Before and after Quantity : Pair (for Left and Right) There was a gap in everything. If this is allowed by individual differences, I think that there are no defective items. I felt there was a reason for being cheap. I do not recommend. View detail
Fits: YAMAHA Majesty 125, YAMAHA YSR80, YAMAHA MAJESTY250 [Majesty]., YAMAHA YZ80, YAMAHA YZ125, YAMAHA DT125, YAMAHA DT50, YAMAHA DT80, YAMAHA SR500, YAMAHA TW200, YAMAHA YSR50, YAMAHA YZ250, YAMAHA SR400, YAMAHA TT250R, YAMAHA TDR125, YAMAHA DT250, YAMAHA Majesty 125, YAMAHA YSR80, YAMAHA MAJESTY250 [Majesty]., YAMAHA YZ80
Grease is not enclosed, size is not correct.
The race and bearing are integrated into one unit, so I had to be careful when inserting the under race and bearing into the Stem. In addition, although it may be unnecessary because they are integrated, there is no grease inside and I am worried that the rattle may come soon.
Also, the height of the upper outer race was not correct, and if you close the Stem with the specified torque, it will not move, so you have to close it with a looser torque.
I regretted that I should have gone with the OEM.
The car is a MAJESTY 125 FI.
View detail
Can you say it is for sale?
Evaluation of facts It is erased when writing
Is webike's way of doing?
If you are considering it would be fine if only cheap
I bought it because it is a special item for Carbon Handlebar
It is too bad product PMC's also attached to our de Mocha? Products like roughly painted as it is
I think that it would be better to make it beautiful even if you raised Cost a little more It is for the sake of the customer but also for the company's Pride
We do not feel like using such a complicated product
There is rough cutting until the place where you are considering, but still it is better if you prefer cosa!
Those who think that the quality is also Large cut is a product that can not be Recommendation
View detail
I am ashamed and do not use it
Structure is too rough!
I purchased it because it was exclusive to PMC's Handlebar
Roughness of the finish Does not it remain after machining!
Is it also possible to say that you are finishing it with Black Painting to the state of first rough cutting and selling it?
Product familiar to the company name Do not you feel ashamed of famous parts shop?
Although it is quite a dry evaluation, it is not a product that can be highly recommended as writing facts is an evaluation
Even if you increase the price, it is better to make it beautifully built!
If it is not for exclusive use it is absolutely not purchased
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled)
Impossible to pass self-running with Passing ...
After attaching this Switch to Z2, as soon as I pressed the Passing switch with confirmation of operation, the spark scattered from the Handlebar Switch and the Fuse flew.
When I tried to disassemble it, there was a Ball pressed by Spring at the base of Passing and Horn switch, that Ball jumped to the beat which pushed the Switch and was in contact with the electric path and was shorting.
I was fortunate to be unlucky that I was not on the road, but have PMC properly tested it?
I became frightened to continue using it and exchanged it with a product of a certain Z specialty shop.
Although Fuse just flew this time, it seems that there are cases where other electronic systems are involved in some cases.
I think that it is an extreme Case, I think that it is a product of Recall.
View detail
No good.
I bought for mk 2 of pmc, but it is made by DOREMI first. Well that's fine, but only one of the three convexities will fit perfectly, so I think if I run I will fly away. Also the packing of goods was properly done, but before that it was full of scratches. You had better find OEM in second hand. View detail
Fits: HONDA VFR750F, HONDA CB1100F, HONDA CB900F, HONDA CB750F, HONDA CBX1000, HONDA VFR400R, HONDA CB400 SUPER FOUR, HONDA STEED400, HONDA CBR500R, HONDA SHADOW400, HONDA CB500S, HONDA CB-1, HONDA CBR250R, HONDA CB500, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR900RRFire blade, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400F, HONDA NT650VDEAUVILLE
It did not attach to VFR 400 R NC 30
Removing Cowl, removing Wheel, removing Front fork, and removing Stem, how Bearing did not match.
I'm sorry.
View detail
The real thing is different from the display of ShoppingPage
Product description of ShoppingPage "7-8 Φ correspondence" , In the real package "6 to 8 mm compatible" It is written.
I could not use it. "6 to 8 mm" If I had written it, I think I did not buy it. I wasted.
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII
worst
In the description of item, it is written as Gel finish, but if you open the box, it seems like white lacquer paint?. A painter shop is also a word of Hydoy! It was deceived !!
It takes time and effort before painting.
I would like to request a lower treatment fee!
View detail
worst
Bracket is sold separately, it does not match at all when purchasing.
Because I changed Brake hose Color does not match
I made a Color and Cut the Emblem angle
Next time I hit Brake, I hit the Fork Guard.
I want you to explain more items.
Emblem and Bracket got us wasted around 5000 yen.
I did not buy it..
View detail
Making is not good
Material : I was looking for Stainless Steel's Banjo bolt and chose this product, but I could not install it easily because of bad screw making.
As I saw it well, it was difficult to put in because the tip end of the screw was not in the form of a Taper, and because there was BALI in the screw part, it did not enter in the middle.
I use File by the end, I take BALI of the thread part and use it somehow, but I do not think I will purchase it next time.
View detail
Breaking "Blur reduction Mirror"
To me it's Z2 Mirror's Initial Model has nothing to do with it. "Round Type" , "Black color" , "It is hard for me to shake" I just wanted Mirror.
So, compared to other companies' Z2 Mirror, MirrorBody has no strange stamp, and "Blur reduction" Purchase this item that sang.
And dare to shake with vibration resistant Short Bracket.
But ..., I feel bad at Mirror trembling at the time of Idling.
Ultimately, at the moment when I ran, Breble trembling.
It was a few steps worse than DAYTONASv Mirror which I had originally worn and felt easy to break.
It is described in the item description "By adopting Aluminum Diecast Frame, we realized reduction of Mirror blur while driving, by changing the mirror support method." What is it?
Perhaps, perhaps, it may be excellent in Z2 Mirror, but at least it is not useful at all in my Motorcycle.
Short Bracket also includes Quantity : Pair (for Left and Right) Both Wound stand out. There was no problem with Long Bracket which was attached to Mirror from the beginning.
With that kind of thing, it became instant storage.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
Defective item
Although it corresponded, it does not operate after trying it at the beginning. Connector mismatch.
Things that Wiring was wrong when sent back.
I replaced it and sent it back, but I do not feel like finishing summer already anymore. The Connector must be fitted or fixed with Tie Wrap but it can not be thought of as Exclusive Design by vehicle type.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z1000 (air-cooled)
OEMO-ring can not be used
I attempted to install an O-ring for OEMDrain bolt to replace O-ring, but I could not use it.
The outer circumference of the groove is larger than OEM Product, so it does not fit in the groove.
Since it can not be helped, I used a liquid Gasket buried in the groove.
View detail
Fits: HONDA CB400FOUR (water-cooled), HONDA CB750 Fore (CB750K), HONDA CB750 Fore (CB750K), HONDA CB750 Fore (CB750K), HONDA CB750 Fore (CB750K)
What is it?... Mr. Webike is just such a thing...
In my case my friends are CB 750 four so I noticed that I noticed that the Motorcycle shop who went and reached in that relationship is specializing in CB 750four, so it is understood.
First of all, although it is engraved with made in japan, making is a little as much as I think whether it is made in a certain country.
1. The SIDE Reflector and the bottom Clear board for Number lighting are not flush but protrude and glued. It is uneven..
2. I do not know whether paint or Clear is blowing but the surface of Lens is tough and there is considerable color unevenness in the red part. It is Muramura.
Compared to another Manufacturer's Remake item that Motorcycle shop recommends, there is a difference that everyone can understand by looking at it. It's Level that says this is like shine and gloss.
It is shocking..
3. At that time Remake's new item recommended by Mono and its Motorcycle shop has a Reflector of Plating paint inside. Because there is it, light reflects at wide angle, Tail glows well and Number also lights with chitin.
I do not have such a thing like Large. It is a skusca..
4. Although it is a miscellaneous part of the largest Large, Large Kimono is different from the beginning. It is obviously a big deal.. At that time it is not quite as doubtful that this Lens is really attached to the Body of the thing.
When aligning with the hole of Rear's FRP Fender, the positions of Screw and Bolt are almost same and there is no problem.
However, since Lens and Body are Large, I think that there is no problem for ASS purchase, but it seems there is a possibility not to be attached when exchanging either one.
All of the above are for specialists "Is this Remake item something bad?" It is understood from comparison of the thing at that time with thing of Remake of another Manufacturer and this product and it does not appear at all about PMC and Webike's product introduction.
Since I had something like the above, I immediately repurchased the item I recommend for that Motorcycle shop.
Like me "I would like to add a kitty and Beauty items if possible" And "Remake items similar to those at that time if possible," I definitely are unsuitable for those who think that.
However, I think that there are also people who say anything is fine, I think that there is no problem for that person.
Compared with other Manufacturer's things, Manufacturer and webike think that it is better to question and ask questions frequently.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
A bit sorry - - -
It was just a good product such as price and Large Kimono, but the item that arrived was long-term stock or was dirty.
Because I did not want to install it dirty, it wiped lightly with a dry cloth. Polo Polo and Plating come off Peeling off.
Besides, because my friend asked me the same item, Quantity : 2pc. Buy and buy Quantity : 2pc. Plating is dirty as well as Set - - -
It is surprising that there are such products in this era.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Cheap reason
GPZ 900 R installed in A 11 Tank and Seat will be available for about 1 centimeter free cheaply I think there is a reason for that as much as possible Although it is somehow Level but amateurs think that it is better not to put out hands
I received returned goods, so I returned it and got the SED of the STD to be replaced by the dealer There was also a better finish there
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Since construction material is a STAINLESS STEEL how much ... a Bolt & Nut -- 1000 yen -- exceeding -- it is how -- although ?pmc products are taking out the Replace article with the STAINLESS-STEEL raw material variously -- -- it is generall
Since construction material is a STAINLESS STEEL how much ... a
Bolt & Nut -- 1000 yen -- exceeding -- it is how -- although ?
pmc products are taking out the Replace article with the STAINLESS-STEEL raw material variously --
-- it is generally higher setting of price.
View detail