Reviews
It looks different
Kawasaki's NAKED is a … product.
I went to a certain Large Hand MotorcycleParts store and they were selling them.
The store is cheaper! I was glad to see that the Stage for installation was sold separately and this one was cheaper with Bracket.
View detail
Z948RS plate
Overall quite happy with the fit and finish of the plate. Something different from other RS'. The backing double sided tape could be a little thinner to give a closer fit. View detail
Dress-up
Horns are attached to hide the bare Horns and for detail up.
The plating was peeling off after about 20,000 km. 。
It would have been better if it was 5mm lower because it interferes with the optical axis adjustment screw of the headlight, but it is acceptable because it is only touched occasionally.
View detail
Emblem
It's very nice.
The front mask stands out.
View detail
Racing
The PMC Laudex RACINGMegaphone Exhaust that I am wearing now originally came with a LOUDEXLogo Emblem sticker, but I bought this new Emblem sticker instead of sticking it because I felt it was too plain in Black Base color. I tried it.
I am satisfied with the LOUDEXLogo, which is slightly larger than the LOUDEXLogo and has a white base with a mirror surface on the logo part.
However, I think that if only heat-resistant double-sided tape is applied, the tape will lift or peel off due to heat or vibration over time, so I would like to reapply it with SiliconBondetc. in that case.
View detail
Bore up? (LAUGHS)
I changed the Side cover so I changed the Emblem along with it! View detail
not bad
20 Kawasaki z900rs, the workmanship is not as good as the original factory, but the difference is not big. The original one is very easy to buckle down, this one is also very easy to stick, and it is relatively strong. But there is one thing to note. I think this is a pair. I found that it only has one side after receiving the goods. If there is an old iron in need, remember to buy two to make a pair. ---------------------------------------------- 20 models Kawasaki z900rs , work is not as good as the original, but little difference. Original buckle down well, this is very nice post, is still relatively strong. But one thing to note, I think that in itself is a pair, get the goods only to find that only one-sided, if there is a need to remember to buy two old iron make up a pair. Powered by Google Translator View detail
In Stem
It is installed in Stem of Z1 Although I was wearing Silver before, I bought Black this time The previous one cracked from the screw hole in about 2 years The width is almost JUST to be made for the old Z series The color of Z1 might not stand out with Silver, but Black is only there on the contrary It looks conspicuous It may be good for hiding external branches of Brake View detail
So so
It was easy to install at the company's Exclusive Bracket. However, regarding Design, I think that it was even better if Front fork breadth became whole. View detail
I pasted it on the Tail section.
For Z1's for Side Cover Emblem, it was Large strange to straighten the shape made on the curve.
In order to let Tail cowl fix it, we had to overlap another Double-sided Tape.
But I think CoolEmblem is suitable for Tail of 900 NINJA.
View detail
An attachment Stay is an option although it will be an oversight of it... I will not carry out Set sale why.(a vehicle type -- is it because it comes out and form is different?) the thing itself is fairly smart -- coming out -- the shin.
An attachment Stay is an option although it will be an oversight of it... I will not carry out Set sale why.(a vehicle type -- is it because it comes out and form is different?) the
thing itself is fairly smart -- coming out -- the shin.
View detail
It attached with KSR110. Although he thought that he would attach from before , it purchased in connection with other merchandise purchase. Somewhat, although it was required, processing became the touch which attached instantly and whose circu
It attached with KSR110.
Although he thought that he would attach from before
, it purchased in connection with other merchandise purchase.
Somewhat, although it was required, processing became the touch which attached instantly and whose circumference of a Front became tight, and it has satisfied it.
View detail
If it attaches then, it will come out rather than the crevice between a Fork and a Stainless emblem considered.
If it attaches then, it will come out rather than the crevice between a Fork and a Stainless emblem considered. View detail
Since there was no exclusive Stay, a suitable Stay, a Bolt, etc. were purchased and attached in the Home center. It is very good to it after attachment for tightness to appear in a Front view. However, with the raw material appropriate for a P
Since there was no exclusive Stay, a suitable Stay, a Bolt, etc. were purchased and attached in the Home center.
It is very good to it after attachment for tightness to appear in a Front view.
However, with the raw material appropriate for a Plastic, if it sees nearby, mind which is somewhat cheap will also be carried out.
I think whether a price may also be a little cheaper.
Since
price side was worrisome, it was referred to as *4.
View detail
It is attachment at the zephyr 750. appearance -- does it become very good? Since a brake line hides with this product, it becomes the impression felt refreshed. It is [ of purchasing emblem stay separately for stainless emblem attachment ] ne
It is attachment at the zephyr 750.
appearance -- does it become very good?
Since a brake line hides with this product, it becomes the impression felt refreshed.
It is [ of purchasing emblem stay separately for stainless emblem attachment ] necessary.
The color was made plating.
It is recommended.
View detail
It attached to 250TR. Since it was not a correspondence vehicle type, although the optional mount stay set was used, it did not attach simply but suffered troubles. It attached at last by die-length change of a bolt, and horn move. It is preem
It attached to 250TR.
Since it was not a correspondence vehicle type, although the optional mount stay set was used, it did not attach simply but suffered troubles.
It attached at last by die-length change of a bolt, and horn move.
It is preeminent for the appearance from before.
It was the highest when cheap to a slight degree.
View detail
The appearance from a front is GOOD!! Attachment was also completed in the smooth. Attachment will also be perfection, if it is another in my case, it purchases the color of 25 mm, without [ three of brakes, or ] using it and two washers do it!!! Or [
The appearance from a front is GOOD!! Attachment was also completed in the smooth.
Attachment will also be perfection, if it is another in my case, it purchases the color of 25 mm, without [ three of brakes, or ] using it and two washers do it!!! Or [ that what is necessary is just to make into up-and-down reverse the plate which the back attaches ].
It is that of cool and they are four stars!!
View detail
It has ridden on the direction of II of ZRX400 of KAWASAKI. Although he wanted to take out a feeling of the old vehicle and it was never a peculiar part of ZRX, it was able to attach through stay. Is the parenthesis of this emblem too good for the
It has ridden on the direction of II of ZRX400 of KAWASAKI.
Although he wanted to take out a feeling of the old vehicle and it was never a peculiar part of ZRX, it was able to attach through stay.
Is the parenthesis of this emblem too good for the naked of a kawasaki privately after all?
Although it is parts of only admiration custom, it is a recommend at an atmosphere tune.
View detail