Reviews
Not as good as it looks - not recommended
Looks nice in the photos, but this PMC seat came with creases in it, and is lower than the standard seat. There are TWO oother big issues with it - the belt I got does not fit, and has a sharp 'nut and bolt' that protrudes making it unusable. So if you want to use the strap, will not work See the photo attached. And it is like sitting on concrete - VERY hard. It does look good but cannot recommend. View detail
Quantity:It is not a Set.
Quantity:I think this price is too high for one piece instead of Set. View detail
Kawasakiz1rScreen fixed Bolt
Screw length short, Nut can not be tightened, so I tightened it tightly and it cracked sleen. (>_<) View detail
I can see the undercoat.
Since the paint thickness of the 900 part is thin, Silver of the base is
I could see it.
I got an exchange.
View detail
Image is too much.
I bought it thinking it was the Core guard in the picture!
I looked closely and saw that it said Air duct.
I feel bad that I didn't check it better myself.
Couldn't you have just posted a normal Air ductGuard picture?
I've been using Webig a lot.
I was able to suspend my disbelief a bit.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
The product is poorly managed
When I went to install it, I saw that there were a few pins missing. The pins that came with it are all there, but they should be locked in place
I couldn't install it because it doesn't have a pin, and I'm disappointed I couldn't return it because it's been 30 days too long
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
not addressed to the impresario
I bought it based on other people's imprints
First of all, ass pain is far more painful than OEM
Doesn't it really hurt to be this scuffy and hard before you sit down? It's a Level that you can tell right away when you touch it, and when you actually ride it, it's not very good for touring I can't go
The footing will be much worse, too
It feels like my inner peach is sticking out
Fitting, as others have said, floats quite a bit off the rear cowl
Overall, the result was a dumping of your Gold
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
1.0
Even though Pin is too thick to cut the hole on the Tank side, Cap does not open at all after installation. The lowest item. I can not use it because it will not open unless I hit it with Hammer. Just a waste of gold. I want you to return it gold. View detail
![Stylish/Seat/Complete [Mesh Type]](https://img.webike-cdn.net/catalogue/images/2341/151-0193_image-1_TS.jpg)
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
The gap is terrible
Before and after Quantity : Pair (for Left and Right) There was a gap in everything. If this is allowed by individual differences, I think that there are no defective items. I felt there was a reason for being cheap. I do not recommend. View detail
No good.
I bought for mk 2 of pmc, but it is made by DOREMI first. Well that's fine, but only one of the three convexities will fit perfectly, so I think if I run I will fly away. Also the packing of goods was properly done, but before that it was full of scratches. You had better find OEM in second hand. View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII
worst
In the description of item, it is written as Gel finish, but if you open the box, it seems like white lacquer paint?. A painter shop is also a word of Hydoy! It was deceived !!
It takes time and effort before painting.
I would like to request a lower treatment fee!
View detail
worst
Bracket is sold separately, it does not match at all when purchasing.
Because I changed Brake hose Color does not match
I made a Color and Cut the Emblem angle
Next time I hit Brake, I hit the Fork Guard.
I want you to explain more items.
Emblem and Bracket got us wasted around 5000 yen.
I did not buy it..
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Cheap reason
GPZ 900 R installed in A 11 Tank and Seat will be available for about 1 centimeter free cheaply I think there is a reason for that as much as possible Although it is somehow Level but amateurs think that it is better not to put out hands
I received returned goods, so I returned it and got the SED of the STD to be replaced by the dealer There was also a better finish there
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4)
Since the rubber had been prolonged, it exchanged, but it has gone out in three months. It was the touch which deteriorated on the whole. Although early appearance seemed to be satisfactory, I would like to have come to suspect whether a raw mater
Since the rubber had been prolonged, it exchanged, but it has gone out in three months.
It was the touch which deteriorated on the whole.
Although early appearance seemed to be satisfactory, I would like to have come to suspect whether a raw material has a problem.
View detail