Reviews
Thin but rigid.
Plate itself is thin but rigid.
It is very helpful that a Bolt for fixing the Camera on the DriveRecorder is also included!
Installation of the bracket itself is very easy as it is co-tightened with the License Plate.
View detail
Not suitable for AIO-5Camera installation
[How is it used?
Used for AIO-5 Camera
Was the one you received as per Image?
As pictured
Was the installation difficult?
The installation itself is just a matter of removing the License Plate and inserting it.
It was used for the Camera of AIO-5, but the position width of the Bracket hole of Camera is different, so drilling is necessary to fix the Bolt.
Double-sided tape can be used for pasting, but the width is a little large and the depth is a little small.
Bolt length is not enough when using Double-sided Tape
It would be nice if it comes with a longer Bolt.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt, Nut, Washer included
[Was there anything that disappointed you?
None
View detail
Consumables.
The same Cool technical center Type S radiator cap had been attached to the vehicle since it was purchased used, but recently I felt that the radiator fan was rotating too quickly, so I purchased a new one and replaced it.
After the replacement, the fan did not turn immediately after driving on a day with temperatures over 30 degrees Celsius, so it may have been a worn out Spring of the Cap.
In any case, they are consumables and should be replaced every two years.
View detail
While changing Radiator fluid
The pressure inside the Radiator is increased to maximize the cooling performance of the Radiator.
I worked on it while changing the Radiator fluid before summer.
It is a simple task to replace the Normal cap.
Performance is expected in the future!
View detail
I could use it for akeeyo's drareco.
Installation was also possible on akeeyo's AKY-958N.
However, there is no flexibility in the Screw tame.
Since I also added DAYTONA's Fender Eliminator, I chose "for Left", but "for Right" seems to work fine too.
View detail
Required Items for ETC Installation
I was concerned about the mounting position of the ETCAntennas and Indicator, so I purchased it. View detail
I think it's all settled in nicely.
I think it's all settled in nicely.
The regrettable part is that
It comes with Screws for installing and fixing the camera.
It would have been nice if it was the same color as the Body anyway.
Silver on Black stands out
View detail
I'm glad I bought it!
I had been trying to bleed the air out of my Motorcycle Brakes by making my own, but it didn't work well. I wasted a lot of time. I wish I had bought it earlier …. View detail
Very good that it's exclusive!
[How is it used?
Brake master cylinder is brembo's 19RCS.
I was looking for a new bracket, and I was surprised to see that PLOT had a special bracket for this purpose, so I bought it.
Was the one you received as per Image?
The image shown in the product image was exactly as shown in the product image!
Was the installation difficult?
It's that easy! The illustrated Instruction Manual is also included, so there are no mistakes in assembly.
It was not clear from the Instruction Manual under what circumstances the ultra-thin Washer in the Spacer-like role would be used.
I did not use it because I was instructed to use it when there was interference, not necessarily to put it on.
How was your experience with it?
Very nice! Very Compact and nice texture! I was also happy to see that the Rubber Bush that attaches to the Oil tank also comes with an exclusive item.
The tank is mounted low because the height of the mount is the minimum required, and all the missing items are unified in black color, which looks very nice and tight.
[Included Parts:were they on?
It looks just like the first picture of the product. In any case, it would be convenient if Oil hose and Clip are also included.
[Was there anything that disappointed you?
Oil hose and hose clip are not included in the kit, so you need to prepare them separately.
As another point to note, if a handlebar with a slightly special shape, such as Condor Handle or Swallow Handle, is installed, the tank may not be tilted correctly.
This Bracket is probably Material:It is Stainless Steel, so it is not impossible to bend, but it is quite hard, so it is Material for Handlebar with hanging angle.:It may be better to use Aluminum flexible Bracket.
View detail
Simple design and the best product.
[How is it used?
The Brake Side is also made by the same PLOT. Oil tank stay Brake S50 only introduced. Part numbers are. BPS001SB It is
The clutch master cylinder is of course brembo's 19RCS. The clutch master cylinder is of course brembo 19RCS.
I was looking for something simple, low height, and black, and PLOT's Bracket was right in the middle of my criteria.
Was the one you received as per Image?
The Mount will be exactly as shown in the second product image, Mount Image! It is perfect.
Black color is paint or cation, Material is probably Stainless Steel.
Included Parts:is also all in black, so it was Exactly the XJR around the Handlebar in pure black.
Was the installation difficult?
It is not difficult to do. It comes with an illustrated Instruction Manual, so you will know immediately what to put on where.
One point is the orientation of the Bracket, but since there is no indication of which is the Tank side and which is the Master side, I was a bit confused for a moment.
How was your experience with it?
I have included a picture of the installation and it turned out to be the best Mount.
But! There is one caveat. I'm sorry I overlooked it myself...
This Bracket is made by brembo. Oil tankS15B only." This is the case
S15 "B" This is important.
The oil tank I had installed was S15A. yes, the angle of the outlet is different.
S15A→ with angled outlet
S15B→ ejector Straight
As it turns out, it did not stick. I was able to cut and install the length optimally because I also bought a new Hose.
However, the Nipple on the Master Cylinder side has become a little overloaded, so the Oil tank was removed as soon as possible. "B" We plan to change the name of the company to the one in the following table.
[Included Parts:were they on?
It is as shown in the picture. The thinner Washer was described as being for interference prevention, but I think it is too thin and will not come into play.
[Was there anything that disappointed you?
As a note, I was a little concerned about the angle of the oil tank, so I bent the bracket and the paint cracked. It is not a defect of the product or anything, but it is unavoidable because of the excessive force applied.
View detail
I didn't use it except when I thought I would...
If you had it, you'd use it!" I bought it, but did not have the opportunity to use it as much as I thought I would.
I used it when I was taking apart a carburetor with a broken cook on a SPADA fuel tank, but to put it another way, that was the only opportunity I had...
It's a good tool to use, but...
View detail
Used for Mistuba EDR-21 installation.
Purchased and installed on Mistuba Sankowa EDR-21 for Rear.
I looked around and chose this product.
Install RearCamera with License Plate
It looks neat and clean.
License Plate location so
The rear of the vehicle was captured perfectly without any blind spots.
Installation was very easy.
View detail
It's nice
I bought a used TRX850 that was a Fender Eliminator with a Silver T-Bracket and a square Reflector.
The bracket is black and I like the shape of the Hexagonal, so I bought it.
It's better now. If I could do a little more reduction in cost, it would be great.
View detail
It was a little short for the REBEL 250 SEdition.
I bought this product because it is compatible with the REBEL 250, but it was not long enough for the SEdition with Fork Boots.
I thought it might be a little loose, but it feels fine for use on regular roads.
Since the Dr-Recorder is made in China, I can't use Bolt, so I use Double-sided Tape to attach it to Bracket.
View detail
Less Chemical waste.
It helps with Throttle and Clutch Wire lubrication.
If you don't have one, you can just lubricate it steadily, but if you have to do several, it will take an endless amount of time.
If you have one of these, it's worth buying because it's a big efficiency boost!
View detail
EDR-21G RearCamera
I used it to mount the RearCamera on my EDR-21G.
This in itself is easy to install.
The hole didn't fit, so I bent the Bracket's Camera mounting part and installed it.
View detail
I can take it off without it.
It's not easy to fit the Large.
It's not used very often, and it seems a bit of a waste.
Without it, you will have a hard time to spring with.
View detail
Fits: KAWASAKI ZX-9R, KAWASAKI ZZR1100, KAWASAKI ZZR1100, KAWASAKI ZXR400R, KAWASAKI ZXR750R, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZZR400, KAWASAKI GPZ900R NINJA, KAWASAKI ZEPHYR1100
In Φ300
[How is it used?
Used in the OEMRotor300 era.
Silver, Compact and thick.
I didn't feel rigid anxiety.
Although the hole dimensions are provided, installation should be done with the Caliper on the side that it is going to move against the Fork outer during breaking and then bolt it in place.
Otherwise, the frictional force caused by the bolt tightening alone may cause the risk of gapping.
Was the one you received as per Image?
Yes
Was the installation difficult?
It's easy if you know the hang and the concept.
How was your experience with it?
OK
[Included Parts:were they on?
Yes, I was wondering if Shim was there.
[Was there anything that disappointed you?
None
View detail
It's not too obvious.
It's a Compact Bracket and it doesn't look so obtrusive.
I chose the Type that co-closes with the Mirror, and the Indicator is perfectly visible in this position.
I don't think the price is cheap, but it's less expensive than other products.
View detail
Can I use any Manufacturer's Camera?
It is a CameraExclusive Bracket, so I could install it on my Chinese Camera without any problem. I think it is good that you can choose for Right or for Left. View detail