Reviews
It looks cool
I just received my package. The quality looks superb. I havent used it yet but will install it soon. I have seen this brand used in Japan in a lot of Kawasaki's and everyone is happy. Thabk you very much for this high quality product View detail
Look and feel
Tanks were changed to brembo 17rcs.
I could have used OEMTank, but I wore it for looks.
After all, satisfaction is Outclassing.
View detail
It's a bit expensive
Purchased for replacement with bremboRCS.
Cospa is not good.
More than that, I would have liked a little more flexibility in Bracket.
It will look and feel different, though.
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
seeking peace of mind
I had always been a person who didn't mind if the fins were crushed by the Car Wash Brush, but a lumber fell from the Truck on the Tomei and flew toward us.
Although I escaped the difficulty, I bought it because I couldn't wait to get stuck with something like that.
Well, the product itself. If you don't handle it with care, it will bend." about the same intensity, but my mental anxiety is much lessened.
To use an analogy, it's better to walk around with a piece of cloth than to walk around with a kin0ma hanging around.
・・・ . ・・・
View detail
Parenthesis OK
I bought the Titanium color because it was the only one in stock at the time of my purchase, but I like Parenthesis.
MASTER is working fine for Corta CORSA.
View detail
Good
This brake master cylinder oil tank support with brembo oil tank look simple and the oil tank position is just right, not too high not to low.Good looking.I buy that with brembo rcs15,that is pretty match.When you know how to bleed the air , the installation is not too much difficult .That is little bit expensive but i think the looking is better than brembo .Webike shipping is fast and packaging is good. View detail
Good looking
This clutch oil tank support with brembo oil tank look simple and the oil tank position is just right, not too high not to low.Good looking. I buy that with brembo rcs14,that is pretty match. When you know how to bleed the air , the installation is not too much difficult . That is little bit expensive but i think the looking is better than brembo . Webike shipping is fast and packaging is good. View detail
Consumables.
The same Cool technical center Type S radiator cap had been attached to the vehicle since it was purchased used, but recently I felt that the radiator fan was rotating too quickly, so I purchased a new one and replaced it.
After the replacement, the fan did not turn immediately after driving on a day with temperatures over 30 degrees Celsius, so it may have been a worn out Spring of the Cap.
In any case, they are consumables and should be replaced every two years.
View detail
For brembo CORSA Short.
Installed on brembo CORSA Corta.
It ponts on with no problem and looks and feels Refreshing.
View detail
Easy to use
I used it immediately after purchasing it at a touring destination. It was unstable on uneven terrain with the Side Stand alone, but once I got used to using it, it was very stable. The pad itself is sturdy and safe to use. View detail
While changing Radiator fluid
The pressure inside the Radiator is increased to maximize the cooling performance of the Radiator.
I worked on it while changing the Radiator fluid before summer.
It is a simple task to replace the Normal cap.
Performance is expected in the future!
View detail
Solid for the price
Solidly built, safe to use and looks good. View detail
For ZX-6R
What made you decide to buy?
After taking delivery of the ZX-6R Someday I'll have a Brembo caliper!" I had planned to finish with Master Cylinder and Brake line, but when I happened to wander around Webig, I found a …Brembo caliper at a discount price, and I almost bought it on impulse. I was going to finish with the Brake line, but I happened to be browsing through Webig and found …Brembo caliper at a low price, so I bought it almost on impulse. PLOTbrembo Offset collar 9mm purchased
[How was the installation?
Before purchasing the Offset collar, I read the description section of the PLOT and found something I didn't understand… Brembo radial caliper is "CaliperA". "CaliperB fits." I have been trying to find out what it means on the Net, but I can't. I called the manufacturer to find out. They said that they could not guarantee the product because they had not confirmed that it was compatible with any other models than the ones listed.
So I checked my ZX-6R. 6ROEMFront Disc is 310mm. I checked the disc and pad contact surface and there was about 1-2mm of space under the pad, so I took a chance and bought a 9mm Offset collar. What a JUST MEET!
[As an aside.
The offset collar I purchased is listed as compatible MODELZ900RS and Universal. However, it was discovered that the offset collar cannot be installed on Smooth. (Sweat) I thought I would go to Smooth because we are both Kawasaki, but … the place that didn't go to Smooth was Where we reuse OEM dwell Pin." I checked if the Z900RS dwell pin and the ZX-6R dwell pin are different, but the OEM parts numbers are the same for both. So, I measured the dwell pin on the offset collar with a caliper and found that the difference was a few millimeters in comma, so I used a drill to grind the dwell pin with paper while rotating it and checked it with a caliper several times before I was able to install it. I do not know if my 6R dwell pin was special or not, but if the dwell pin did not fit, it was either due to grinding or thermal expansion. I was worried that thermal expansion would cause discoloration when the collar was heated, so I polished mine. (Please consider this for reference only.)
I found the GROM to be very informative and helpful when customizing, but unfortunately the ZX-6R has less information. If you have any questions, please feel free to contact us. View Service Manual I'll check with the Manufacturer and have various conversations with the person in charge." And before I know it, I'm killing it. I hope this information will be of help to owners who are planning to customize their ZX-6R! I will publish the information for your reference.
How was your experience with it?
RadialMonoblock caliper M4 on 6R OEMFront Disc 310mm sutra without incident. "CaliperB fits." has been installed.
View detail
Security as well.
What made you decide to buy?
After taking delivery of the ZX-6R Someday I'll have a Brembo caliper!" I had envisioned this. Then, my first tinker of 2023 was to strengthen the Brake! Originally, I was going to finish with Master Cylinder and Brake line, but when I happened to wander around Webig, I found …Brembo caliper at a discount price, so I almost bought it on impulse. In order to install this Brembo caliper that I bought on impulse without any worries. PLOTbrembo Stainless SteelCaliper Mount Bolt I chose and purchased a
[How was the installation?
To install Brembo caliper, Offset collar is required. So we prepared PLOTbrembo Offset collar Offset amount 9mm. In the explanation column, it says If the Z900RS is equipped with the CaliperB, the OEM Mount Bolt can be used. The OEM mount bolt length for the ZX-6R is approximately 62mm.
We chose PLOT because they are sold by other manufacturers, but we chose PLOT because they are the best choice for this Mount Bolt. The reason why we chose PLOT is that this Mount Bolt requires the T50SizeSocket for Hexalobular/Torque tool for tightening, so it cannot be easily removed. (Nothing can compare to PRO for theft, though …) We chose PLOT for its good design and security.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
How was your experience with it?
I think the custom feel and security has been improved… but the functionality remains the same.
View detail
Necessary Parts for bremboRCSRadial
What made you decide to buy?
Someday I'll get a brembo!" I have been envisioning this since I took delivery of my ZX-6R. Such is the year 2023. Brake Enhancement." I finally decided to install a 19RCS Radial Brake Master Cylinder as one of the brake enhancements, which is necessary since I don't have an oil tank. I chose the PLOT product because I found a lot of information about it.
[How was the installation?
First, attach the oil tank and bracket to the Master CylinderClamp and position it. SSMotorcycle also has a cowl and screen, so make sure the position does not interfere with them. After positioning, check the length of the oil hose and cut it. If you cut the oil hose too short, you will not be able to go back, so it is recommended to cut it a little longer for fine adjustment.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
How was your experience with it?
The custom feeling has increased immediately. I can't stop grinning over the Shield because it's the most visible place when I'm driving. (Mirror shield so you can't see it from the outside)
bremboMark is a nice One point.
View detail
Prevents clothing from burning
[How is it used?
When I stop and put my foot out to land on the ground, I would prefer to put my foot on the back side of the footpeg because it is more stable and supports the body of the vehicle, but if I put my foot on the back side of the footpeg, the Exhaust System and the Pants come in contact and burn or melt. So I had no choice but to put my foot on the front side of the footpeg. But! I found a product that looked just right! I immediately purchased it.
Was the one you received as per Image?
It was Exactly Size where I was planning to install it.
Was the installation difficult?
The bracket welded to the reverse side of the Guard was bent into a trapezoidal shape with radio pliers and then attached with the included Gold Attachment Band so that there would be a certain gap between the Exhaust System and the Guard when installed.
How was your experience with it?
Now that the Exhaust System and Pants are no longer in direct contact, I can safely put my foot on the back of the footpeg, and I can support the body more firmly and stably than before, which doubles my sense of security!
[Included Parts:were they on?
Two Gold Attribute Band are included. Phillips Screwdriver is required to tighten these bands.
[Was there anything that disappointed you?
Not really!
Other items that would be helpful
Points and hang of installation:In the case of the FZS600 exhaust system, there was a lot of excess band left when the Gold band was tightened, so we cut off the excess band with a cutter wire, leaving about 10mm of excess white space.
View detail
In the course of Coolant replacement
I replaced it while replacing Coolant.
Cap is also a consumable item, so it's nice to be able to buy it at a discount.
Cap is also cool, but it is under the Tank so it will not be visible
View detail
Installed on GSX R1000
Purchased due to the need for color due to Caliper changes.
OEM location and was Exactly
View detail
Very good that it's exclusive!
[How is it used?
Brake master cylinder is brembo's 19RCS.
I was looking for a new bracket, and I was surprised to see that PLOT had a special bracket for this purpose, so I bought it.
Was the one you received as per Image?
The image shown in the product image was exactly as shown in the product image!
Was the installation difficult?
It's that easy! The illustrated Instruction Manual is also included, so there are no mistakes in assembly.
It was not clear from the Instruction Manual under what circumstances the ultra-thin Washer in the Spacer-like role would be used.
I did not use it because I was instructed to use it when there was interference, not necessarily to put it on.
How was your experience with it?
Very nice! Very Compact and nice texture! I was also happy to see that the Rubber Bush that attaches to the Oil tank also comes with an exclusive item.
The tank is mounted low because the height of the mount is the minimum required, and all the missing items are unified in black color, which looks very nice and tight.
[Included Parts:were they on?
It looks just like the first picture of the product. In any case, it would be convenient if Oil hose and Clip are also included.
[Was there anything that disappointed you?
Oil hose and hose clip are not included in the kit, so you need to prepare them separately.
As another point to note, if a handlebar with a slightly special shape, such as Condor Handle or Swallow Handle, is installed, the tank may not be tilted correctly.
This Bracket is probably Material:It is Stainless Steel, so it is not impossible to bend, but it is quite hard, so it is Material for Handlebar with hanging angle.:It may be better to use Aluminum flexible Bracket.
View detail
Simple design and the best product.
[How is it used?
The Brake Side is also made by the same PLOT. Oil tank stay Brake S50 only introduced. Part numbers are. BPS001SB It is
The clutch master cylinder is of course brembo's 19RCS. The clutch master cylinder is of course brembo 19RCS.
I was looking for something simple, low height, and black, and PLOT's Bracket was right in the middle of my criteria.
Was the one you received as per Image?
The Mount will be exactly as shown in the second product image, Mount Image! It is perfect.
Black color is paint or cation, Material is probably Stainless Steel.
Included Parts:is also all in black, so it was Exactly the XJR around the Handlebar in pure black.
Was the installation difficult?
It is not difficult to do. It comes with an illustrated Instruction Manual, so you will know immediately what to put on where.
One point is the orientation of the Bracket, but since there is no indication of which is the Tank side and which is the Master side, I was a bit confused for a moment.
How was your experience with it?
I have included a picture of the installation and it turned out to be the best Mount.
But! There is one caveat. I'm sorry I overlooked it myself...
This Bracket is made by brembo. Oil tankS15B only." This is the case
S15 "B" This is important.
The oil tank I had installed was S15A. yes, the angle of the outlet is different.
S15A→ with angled outlet
S15B→ ejector Straight
As it turns out, it did not stick. I was able to cut and install the length optimally because I also bought a new Hose.
However, the Nipple on the Master Cylinder side has become a little overloaded, so the Oil tank was removed as soon as possible. "B" We plan to change the name of the company to the one in the following table.
[Included Parts:were they on?
It is as shown in the picture. The thinner Washer was described as being for interference prevention, but I think it is too thin and will not come into play.
[Was there anything that disappointed you?
As a note, I was a little concerned about the angle of the oil tank, so I bent the bracket and the paint cracked. It is not a defect of the product or anything, but it is unavoidable because of the excessive force applied.
View detail