Reviews
PinGelCook
Shipping is on schedule!
I was able to place my order with peace of mind.
View detail
PinGelPlate
It is essential to install PinGelCook. View detail
PinGelCook!
fcr33πI changed to PinGel to install the carburetor because of the Gasoline flow rate, even though the OEMCook does not interfere with it. The main purpose of this project is for appearance, but… I think it's a good idea.
As other reviewers have mentioned, the hole on the tank side has to be cut down a little to make it larger.
I have wrapped a couple of rolls of seal tape around it and I am happy with it, no gasoline leaks and better parenthesis. If it were a little cheaper, I would have no complaints.
View detail
Mk2 with tmr36 and PinGel6000
I installed a tmr36 on a mk2, and the OEM cook completely interfered with the installation, but with a 6mmOffset PinGel6000 mounted slightly to the rear, I was able to complete the installation without any problems. View detail
Dress-up
There are many effects, but OEMCook...
For dress-up because of yabo
Installed. It looks very
Well-organized and satisfactory, but perish Brown bitter Brown
WhiteRust is easy to find.
View detail
Used to install Cook by Go Lamp Roducts
Used for Fuel Cock installation by Go Lamp Roducts.
The tank hole was enlarged with a file so that the filter could be inserted, the tank was cleaned, and a fuel fliter was installed after cooking just to be sure.
Tank mounting surface is flattened with oil stone and Liquid Gasket (How to paint Large thing) Seal tape also for use and installation Bolt (Winding Large thing) and Liquid Gasket, and I think I was able to install it perfectly without any blotches after drying overnight.
View detail
External carburetor accompaniment. Indispensable.
In my opinion, it is a necessity for vehicles with external big cabs, but not for normal cabs.
We are using it in Lectron, but Bore up & Big cab Quantities:I feel the need for the first time in Set.
It is not recommended to attach it to a vehicle that looks NORMAL, as it will only cause loss of Reserve and inconvenience.
Well, I don't have to tell you this to those who can maintain MACH…
View detail
Fits: KAWASAKI 750SS MACHIV H2 , KAWASAKI 750SS MACHIV H2 [Mach].
Required when PinGel is installed
Required when attaching PinGelCook
We used it for MACH.
Use less-used water tapes for installation
Buy at Home center.
View detail
Fits: KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1000 (air-cooled | KZ), KAWASAKI Z1100 GP B2, KAWASAKI Z2, KAWASAKI Z750, KAWASAKI Z900, KAWASAKI Z1-R II, KAWASAKI GPz1100F, KAWASAKI Z900, KAWASAKI Z750, KAWASAKI Z2, KAWASAKI Z1100 GP B2, KAWASAKI Z1000 (Air-cooled|KZ), KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z1-R II, KAWASAKI GPz1100F
To KawasakiZ1
PinGelCook and NaturallyQuantity:I bought this in a set. At first, I was worried about getting the right angle because it was screwed in, or if it would leak. I'm glad I bought it. View detail
To KawasakiZ1
I installed this carburetor when I switched to TMR. it has reserve, no lack of flow, and no leaks even after several years of use. If you are replacing a 6mm hose carburetor with an 8mm hose external carburetor, this is a good choice. View detail
Parenthesis good?
Adapter and Quantity:I bought it in a Set, but Parenthesis got better. View detail
You're early!
PinGel's Fuel Cock and Quantity:I bought it in a Set, but it was a fast response, and Motorcycle became Parenthesis well. View detail
PinGelSingle outHigh flowFuel CockriReserve with 3/8NPT
When I changed the Carburetor, I replaced the negative pressure type Fuel Cock with a direct type PinGel.
Because the screw part is aluminum, if it tightens too much, the screw mountain is destroyed and it becomes useless.
View detail
PinGelAdapter plate for 3/8NPTCook
I bought this when I changed my Carburetor to TMR-MJN and when I changed my Fuel Cock from negative pressure type to direct pressure type. View detail
It's just the right thickness.
This is a must when PinGel Cook is installed. It is made of a moderately thick Gasket, so as long as the bottom of the Tank is not rough or distorted by Rust, there should be no leakage of Gasoline.
If it is still blotting after using this, then either there is a leak from the Screw section or the parallel is not showing on the bottom of the Tank.
View detail
Performance and texture are both good.
It was easy to install. I thought it was expensive, but the texture is very nice and cool.
Just in a few days, Plating got Rust cloudy. It's also very easy to operate.
View detail
Accuracy and texture are good.
I used it for PinGelCook installation. The texture accuracy is very good.
It's easy to install and can be done by anyone, and it's the perfect companion for your fcr.
View detail
I love the inconspicuous Black color
I've had a Chrome PinGel on my Motorcycle since I bought it used
Since it's an older car, the OEM Product may have been discontinued and put on as a replacement
About two months ago, I had to replace the tank due to some problems with the fuel sensoretc I went with PinGel in Black, which is less noticeable than Chrome
So far I have no complaints about the features, but as others have implied, On, Off, and I would like to see a sense of click to make the Reserve position easier to understand
Large without any knowledge of it Cook is this But I forgot to turn it off once in the past and made it overflow If there is a compatible product that can be diverted, ManufacturerOEM's negative pressure cooks are ideal
View detail
To divert the tank of a SEA BASS car
I used it to divert the tank of DRZ400 to DR250R of SEA BASS
I managed to avoid the interference with the Frame and Engine hanger on the back of the tank by beating it I did, but there was nothing I could do about Fuel Cock
Both DRZ's and DR's come too far down and interfere with the cylinder head or cylinder I will
This is where I came up with the PinGelCookAdapter
It was originally intended to be used for Kawasaki's ZrX1100/1200, ZEPHYR, etc The Pitch for PinGelCook is the same as the Adapter for PinGelCook This is a miracle that happened
Of course the bolt diameter is the same, so you can put it on as it is
Originally I would have installed a 1/4 NPTPinGelCook here, but my budget is limited and There are, therefore, Harley-Davidson and others sold by Guts Chrome I used a Brass petcock like the one used on the Custom car
The mounting diameter is the same 1/4 NPT, so it comes standard
I wrapped a seal tape around it just to be sure, but it doesn't bleed gasoline It was
This Brass petcock is very small, so it helps to avoid interference even more They gave me
No one will do this, but you can use it this way
If you are not satisfied with the flow rate of the DRZ, you may want to consider using High flowCook is easy to do
High Camshaft&FCR Carburetor Body I've never heard of putting Carburetor in and spinning it around, but I've never heard of it being enough & hellip; lol
View detail
I wouldn't recommend it except for the space issue
Due to insufficient gasoline flow from Cook and interference with the Carburetor, it was unavoidable I can't blame you if you want to replace Cook, but right now I personally don't think it's very desirable
One is expensive and the other is the behavior of the Knob of Cook which is too Smooth When removing the tank and servicing it, you can't help but touch the Knob a little bit and it's a real pain! Gasoline will come spilling out at If this is driving hard, you can touch the Knob with your knee and it can turn off! It's a good idea Some of you who like to race on grass wrapped a Tie Wrap to hold the Knob in place when you ride Some people do (I suppose it depends on the vehicle, so we don't all have to go that far.)
This is due to the fact that the Knob moves too Smooth and is infinitely adjustable, so it is very similar to It seems that there are a lot of people who choose the Fuel Cock of the Go-RAN company of the product that did it The structure of this one is designed to give a sense of click to each of ON/OFF and Reserve You can switch between Chica Chi and Knob clearly, and it works Smooth Functionally, it is completely upward compatible with Chica Chi
The most Large Point of no recommendation is about Overhaul. packing replacement You need to remove the press-fit part of the press-fit part as well, which may not be a problem for those who are used to it It's not something that can be completely disassembled by loosening the bolts, so it's not something that can be completely disassembled It is inferior in sex
If you are attracted by the texture of Plating and want to make it one point, it's fine I don't think so, but my application is better suited to the use of the OEM Cook and cheap external Cook I think it's a good idea If it's unavoidable, it's not an option, but unless you have to put this on, I'd avoid it Items
View detail