Reviews
OEMQuality
I bought this Harness to install the KITACO Shuttle beam on my SEROW250 and because this Harness is also used for the OEM Option.
It's been 1 year and 9 months since I installed it and I've driven about 25,000km without any problems.
The kit for SEROW250 released from Y's Gear is closer to the battery in order to interrupt the coupler of Blinker relay for the ACC power supply.
In contrast, because this is coming out from the Switch side which will become Handlebar for Universal, I made it branch from Horn and took out ACC power.
The person who is familiar with the electric relation may be able to suppress the cost by arranging Switchetc. by oneself, but I, the person who is not familiar with it, may be able to use the quantity of Universal that may be reliable.:Set was grateful for the presence.
View detail
Mounted on Tenere 700
The design and fitment of the Tenere 700 OEM Product is Exactly as you would expect from an OEM product. For installation, you just need to buy the OEM bracket and mount it on the bottom of the headlight, then remove the cowl and connect the wiring to the coupler. It is a pity that the WiringHarness is a Universal Product and the Switch is a spec. that attaches to the Handlebar with a Bracket. it is not the fault of PIAA FogLight but the problem of Motorcycle. It is not the fault of PIAA FogLight but the problem of Motorcycle. As for the durability, I think there is no problem, but I don't evaluate it because I use it less than a year, and the headlight of Tenere700 is good because I can illuminate the dark part of the front just because the low beam is too far. It's my fault for not checking, but I found out how to adjust the angle of the headlight after installation, but I'm glad I did. Recently, there are a lot of accidents between motorcycles and cars, so I wonder if I can appeal my existence by lighting up not only at night but also during the day? View detail
Compact
It is thick but the size itself is compact. This is a well known manufacturer, so I hope it won't break down. View detail
Recommendation for MOTARD's Number Plate conversion!
I used it on my WR250X which I also use for road race. It's so much brighter than Fog light!
The light distribution is not the same as with fog, as it does not illuminate a wide area in the foreground, but rather a straight line and long distance. I think it's a great alternative to a headlight.
However, the body is larger than normal fog, so the body must be strengthened to prevent vibration and the bracket. to.
View detail
Bulky and cheaply made
What is the Sports Horn anyway? Inexpensive plastics with gorgeous stickers all over the place.
Somewhere familiar.
View detail
Satisfied with the performance, good cost performance
Horn translated (in notation please enter here) The alarm clock It is used to warn people around you to avoid danger
Which means that people around you will be surprised, or at least alerted Aha My theory is that it should sound like it does
However, my beloved Horn is on the same Level as the moped, like a light truck Poof! It's an unreliable sound
I used to put up with it, but two years ago, I started riding it every day to work I have to do something I thought
I searched for products on Webike and chose this one, which has a high Impression rating
The product I received is surprisingly thick but very lightweight
My car, Horn, came out of the Frame under LeftRadiator and in front of Engine This product is attached to the Bracket, but this product has one Normal horne bolt You can remove it with a
Because the cord is the same as NORMAL and the shape of the terminal is also the same, the replacement work could be done in 10 minutes
Both the sound quality and volume are upgraded beyond comparison with NORMAL
It's SingleHorn because of Space, but as others have implied If you want to use it as a single, we recommend 500hz in between
View detail
Designed for Motorcycle
What made you decide to buy?
(I didn't buy the product (it was included in the Fog Lamp Kit mentioned below), so I omitted it
How was your experience with it?
The object of the in-play is the actual Fog Lamp Kit (part number:0SK-ZX-MGZ) that I purchased 02) will be the power connection Harness included in the (02) (see the second post photo. 400X There are some parts that have been slightly arranged for this product, but as far as I can see from the product photos, it is basically (Same as the original)
The Switch is Waterproof Specification and every time you press the Switch It is designed to switch between ON (lit up in red) and OFF (lit up in green), so that you can see the current status is easy to understand (Quantity:(See the photo posted in 1pc. eyes)
Looking at the other imprints/reviews "The Switch is hard to push But I didn't mind it because it's not an operation I do frequently
Was the installation difficult?
For power, you can find the HONDAOEMOption in the RightFront cowl Coupler for Option to be used with Fog Lamp etc. (It is in the 3rd picture of the post) Covered in translucent HarnessBoots (it's hard to tell), the Black (Coupler)
Connecting to the Coupler for Options is not difficult, but in the case of the 400X Until the coupler can be accessed where it is, the middle cowl and You need to remove the MeterPaneletc (See the third photo in the post)
【Please tell me the installation point and hang】
As for the power supply, you can stop the standard Battery installation method and use the Option It is connected to the Coupler (ACC power supply) for
Therefore, the Round Type Terminal that was assembled on Harness was detached and By reusing the DummyCoupler installed on the Coupler to which you are connected Assembled on Harness (https://imp.webike.net/) article/0432356/(See the
In order to perform the following wiring, Harness was reconfigured and assembled after disassembly It is
Harness for LeftLamp is aligned with Rightfor BlinkerHarness Inside the LeftMiddle cowl for RightLamp and Switch Harness is wiring to the inside of the RightMiddle cowl
Harness for switch folds forward for RightHandlebar switch Wiring along the Harness and connecting to the Switch and Coupler
In addition, so that it is easy to remove the Coupler of LampBody, Harness for Lamp can be used for the same purpose It can be pulled out at the bottom of the front cowl (Quantity:1 Set of 4pcs. (See the photo posted in the eye)
Also, to prevent the Harness for Lamp from touching the Front forketc Band is used to secure it to the Front cowl stay (see the fifth photo in the post)
I tried to mount the Switch on the Right Side Handlebar, but the included Master when using the Switch bracket for Handlebar mounting It is attached to the master cylinder holder to interfere with the cylinder
By the way, the NORMAL master clankholder is not available when the front side is flat There is no, so the ENDURANCE "Master Cylinder Holder B (https://imp.webike.net/commu/article/) 0295843/) in exchange for (Quantity:(See the photo posted in 1pc. eyes)
[Was there anything that disappointed you?
I've been using it for over 4 years and so far, nothing special
[Was the Instruction Manual easy to understand?
(Omitted since I didn't buy the product.)
[Included Parts:were they on?
(Omitted since I didn't buy the product.)
Do you have any wishes or improvements you would like to make for the Manufacturer?
I've been using it for over 4 years and so far, nothing special
[Do you have any products to compare it to?
Not particularly
Harness power connection included in the Fog Lamp Kit I purchased (subject to in-play) ), I thought I could just use the
[Others]
I had never seen Fog Lamp Kit that I purchased this time in Net Shopping being sold I happened to see it (even though I saw it, it was labeled as discontinued (T_T)), but it just happened to be "400X Fog Lamp When I was searching for the image with the key word "#", I happened to find it on the Yahoo! When I was searching for the image with the key word, I found by chance that it was listed on Yahoo!
* The 19th Impression Con test (https://www.webike.net/campaign/20191001_) (impression_contest/), and use the template for this item as a reference I'm writing an impresario by
View detail
Doesn't meet expectations for price
The LP530 seems to be well made and looks to be very durable. Looks very slick but not really happy with the light output though. It should be much brighter according to the advertisement. It's brightness is hardly noticeable. Lights are well built and look very nice, they give a good wide pattern but are not bright at all. They are a more for show light than a serious fog light. I have had PIAA for years and all of their other lights are great. Way overpriced for this model. View detail
Great tone
I installed it on my SR400, removed the OEMHorn and tried to install it in its place! But the plastic cover got in the way and I had to remove it and cut the bracket I was able to install it without any interference 。 As for the tone, I'm satisfied with the sound, which is much larger than I imagined View detail
Dramatic! Not so much
CB400F (NC47) attached to It's so bright! I'm not so sure Hey, something's getting brighter It's a good feeling, much better than OEM Halogen
View detail
Pia Bumpy
I bought it and received it in 3 days. Request for delivery by default. It seems to be a little cheaper than the domestic internet price. The only disappointment is that the manual is only in Japanese. I wish there was English too. Packaging is in good condition and not yet installed. Ducati Monster 821. I plan to install it by referring to utop. Purchased and received in 3 days. Apply for shipping by default. It's a little cheaper than domestic internet. One thing is that the manual is in Japanese only. I would like to have English too. Packing is in good condition and not yet installed. Ducati Monster 821. I will install it by myself. translated by Google Translator View detail
Pia sports soul..
I bought it at a good price. I bought it last time and installed it myself. It can be installed immediately without installing a separate relay. The sound is great for a single shot. I bought an additional one to install it in my wife's car. The sound is clear and cheerful. I am very satisfied with the price. I bought the price well cheaply. I purchased it last time and installed it directly. Relays can be installed without any mounting. Sound is also excellent for one step.(translated by Google Translator) View detail
I bought it at a good price.
I bought it as a substitute for pure soul. The sound is good and the product is good. Delivery is not much later than in Korea. It seems to take 2 days longer than domestic delivery. I bought a single soul because it is subject to structural change. I bought pure genuine horn. Sounds good and it's good. Delivery is not much later than domestic. It seems that it takes 2 more days than domestic delivery.(translated by Google Translator) View detail
Good high tone horn
This horn gives a high tone. When used in conjunction with the 500Hz, the sound is more resonant. Overall, I think there is a more PIAA Slender Horn dimension, which is 400Hz+500Hz. But the PIAA Sports Horn can be set up to 600Hz. View detail
Best quality horn
After I tried installing the PIAA horns to replace the another brand digital horns. I feel that the PIAA's horn is brighter and has a better sound dimension. Of course, it must be installed together. I installed 400Hz and 500Hz, which I thought would not change to another brand. View detail
High tone horn!
I think that if someone would install single horn. I recommend install PIAA 500Hz. only. You get a high tone. And better than the original horn from the factory. And you don't need a relay. Just unplug the factory horn and replace PIAA horn! View detail
Quality of sound.
I've never used the PIAA Horn, but have read many reviews that many website recommend buying a PIAA Sport Horn. So I bought a pair of 500Hz + 600Hz. I don't feel disappointed.However I was a little shocked every time. I hugged the horns installed on my bike. View detail
Best sound of digital horn
This horn (500Hz.) is suitable for use with the PIAA Sports Horn 400Hz. I think it sounds more perverse than the PIAA Slender Horn. PIAA Sports Horns look appropriate to install on a motorcycle. Replace the factory horns. View detail
It is a good sound that you can firmly Appeal
Because OEM's Horn is Single, it is necessary to have a sound that sounds good with a good tone in Single
As a result of examining various Net, this Horn is the best
400 - 500 - There were three kinds of 600 Hz, but if it is Single, 500 Hz
It was a correct answer..
Installation required Bracket and Wiring extension, but it is easy.
View detail
Mounting Easy
I exchanged because the sound of Normal horne is not reliable.
The sound is also good and not a conspicuous Parts, but I think that the function is sufficient.
Recommendation to change from unreliable sound.
View detail