Reviews
Fits: HONDA APE 50, HONDA GROM, HONDA MONKEY125, HONDA CT125・CT110 HUNTER CUB
Cost-effective Pad
I bought it because it was cheap, and it is a very ordinary pad with performance comparable to OEM.
Life is still unknown.
View detail
Enough for normal use.
I bought this when I bought my vehicle used and replaced the Pad.
It works just fine, it's not too bad to operate, and it has a Merit that's affordable.
good point
Good enough performance for city riding.
It's very cosy.
Easy to get a bite.
Fast delivery.
A bad point
It is not suitable for vehicles that have been powered up.
If the vehicle is powered up, it will deplete quickly.
It can be used without a problem if it is the degree which added a little hand to NORMAL, and it is the Parts which is never bad.
It works normally, and the controls are not bad.
If you have modified the intake and exhaust, and strengthened the suspension, the brake will be defeated, so you can not recommend to tune the car.
View detail
Fits: HONDA RUNAWAY, HONDA Live Dio Cesta, HONDA LIVE DIOSPECIAL Knife, HONDA LIVE DIOJ, HONDA LIVE DIO, HONDA PAX CLUB, HONDA TODAY, HONDA DIO FIT, HONDA DIO CHESTA, HONDA DIO, HONDA TACT BASIC, HONDA TACT STAND-UP, HONDA TACT, HONDA SMART DIO, HONDA ZOOMER, HONDA SUPER DIO, HONDA GIORNO CREA, HONDA Giorno, HONDA GIORCUB, HONDA JULIO
OEM Equivalent Product, Brand in Japan.
I replaced the front and rear brake shoes with new ones while I was replacing the tires on my moped.
I decided to go with PFP because I thought it would be better if I could get approximate performance for less than half the price of OEM Parts.
Although there are cheaper CHINA non brand at large mail order sites
As you might expect, I have some resistance to Brake Parts, so I chose from Japan's Brand.
I chose it because it came with a Spring, was carefully packaged in a paper Package, and I knew that Motorcycle shops use it for repairs.
The Package says NAO material (Non-asbestosOrganic). I don't think there is any Brake Shoe that uses Asbestos material nowadays, but this NAO is …
1.Compared to other materials, it is more resistant to wear and generates less friction powder.
2.Low aggression, reduced ringing
3.Quantity to weather:Pair (for Left and Right) The performance of the system is not limited by the
4.Spring is included and braking force is stable after shoe replacement.
5.It is also effective at low temperatures and has excellent initial braking power.
I see, it is Perfect ^^^.
Nowadays, OEM Parts are made in Asia. If the quality is the same, the cheaper the better.
When replacing, clean and grease up the brake camshaft, and maintain the cable.
No squeal and I am satisfied so far. I don't know how durable it is so I gave it 3 stars.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX1100S, SUZUKI GSX-R750, KAWASAKI ZZ-R400, KAWASAKI ZZ-R1200, KAWASAKI ZZ-R1100, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR X, KAWASAKI Ninja ZX-9R, SUZUKI SV1000 SZ, SUZUKI SV1000, SUZUKI TL1000S(97-01), SUZUKI BANDIT1200 S, SUZUKI GSR400, SUZUKI BANDIT1200, SUZUKI BANDIT1250 ABS, SUZUKI GSR600(06), SUZUKI GSX-R400 R, SUZUKI GSX-R400, SUZUKI BANDIT1250 S ABS
It's cosy, but it squeaks.
I had been using SinteredPad and bought this product to replace it. I don't know if it is because I didn't chamfer the surface when I replaced it. Both Dry and Wet braking is as good as it can be, and considering the price, the cost is high. If you don't want absolute braking, it is necessary and sufficient for normal driving. View detail
Fits: HONDA RUNAWAY, HONDA Live Dio Cesta, HONDA LIVE DIOSPECIAL Knife, HONDA LIVE DIOJ, HONDA LIVE DIO, HONDA PAX CLUB, HONDA TODAY, HONDA DIO FIT, HONDA DIO CHESTA, HONDA DIO, HONDA TACT BASIC, HONDA TACT STAND-UP, HONDA TACT, HONDA SMART DIO, HONDA ZOOMER, HONDA SUPER DIO, HONDA GIORNO CREA, HONDA Giorno, HONDA GIORCUB, HONDA JULIO
Satisfied
To replace the rear brake shoe 。
I was able to install without problems 。 Does it work as well as the OEM, etc., or a little better?
There is no squealing, and the costuming is very high
This time it was Rear, but I think I'll use this for Front as well
View detail
Fits: YAMAHA TT-R125 LW, YAMAHA YB-1 four, YAMAHA YB-1 four, YAMAHA YB50 four, YAMAHA GEAR BA50, YAMAHA GEAR, YAMAHA MATE V50 D, YAMAHA MATE V50 D, YAMAHA MATE V50 D, YAMAHA MATE V50, YAMAHA MATE V50, YAMAHA MATE V50, YAMAHA Newsmate V50N, YAMAHA Newsmate V50N, YAMAHA Newsmate V50N, YAMAHA Newsmate 90, YAMAHA Newsmate 90 T90N, YAMAHA newsgear, YAMAHA News Gear (4ST) BX50N, YAMAHA News Gear BA50N
Cospa strongest
I was worried about it being cheap, but it's nothing to worry about
It will stop
Brake noise sometimes occurs after rain
I don't know how long it will last, as I've just started using it
View detail
Fits: SUZUKI Birdie4ST Burden|FB50L, SUZUKI Newspaper Birdie4ST|FB50P, SUZUKI Newspaper Birdie4STG|H|FB50PH, SUZUKI EPSILON 150 Newspaper Birdie2ST, SUZUKI DF200 DJEBEL, SUZUKI DF200 DJEBEL, SUZUKI DF125 DJEBEL, SUZUKI Volty type C TU250, SUZUKI Volty type C, SUZUKI Volty type I TU250, SUZUKI Volty type I TU250, SUZUKI Volty type I TU250, SUZUKI Volty type I, SUZUKI Volty type I, SUZUKI Volty type I, SUZUKI Volty type II TU250, SUZUKI Volty type II, SUZUKI Volty type T TU250, SUZUKI Volty type T, SUZUKI MARAUDER250
good
The DF200 DJEBEL's Rear brakeTouch
We've got some complaints
I replaced it with a PFPBrake Shoe
Low cost but acceptable for use
Compared to the OEM Product, the aluminum shape of the body is
Reduction in cost?
I'm a little nervous about the look and the strength of it, but …
There is no problem for now
BrakeTouch is a little lighter than the above
Brake works well
View detail
Fits: HONDA SUPER CUB F, HONDA SUPER CUB F, HONDA press cub, HONDA Spacey 125, HONDA FTR223, HONDA Super Cub 110 F, HONDA press cub, HONDA Spacey 125, HONDA FTR223, HONDA Super Cub 110 F
I chose it because it was less expensive
It was a replacement for the OEM Product, but I chose it because of its low price Fee Ring-wise, it is very normal It is not enough to lock even if you apply the full rear brake
The OEM Product we replaced still looked like the Shoe, but the Dust, etc It was not working well By the way, the first exchange at 65,600?
Now, I hope it's durable, but the next time I'm going to replace it, I'm going to say a little sooner, but it's about 20,000 miles Isn't it?
View detail
Fits: HONDA SUPER CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 70, HONDA BROAD 90, HONDA LEAD 100 NH100, HONDA LEAD 100, HONDA LEAD 50, HONDA LEAD 90, HONDA CABINA, HONDA CABINA 90, HONDA read, HONDA broadcloth, HONDA dachshund, HONDA Shirley (6V), HONDA Shari (12V), HONDA Shirley 70, HONDA Gorilla (12V), HONDA CB70, HONDA CD90, HONDA R&P
Good at low price
There is no problem for minutes to ride normally.
There was no fear of Touring of about 100 km.
It is a satisfactory product that you can perform mounting without incongruity.
View detail
Fits: SUZUKI Address V100, SUZUKI Address V125 Front, SUZUKI Address V50, SUZUKI sepia, SUZUKI let's, SUZUKI Address V100, SUZUKI Address V125 Front, SUZUKI Address V50, SUZUKI sepia, SUZUKI let's
It is feeling that it is neither possible nor impossible.
If possible, Black was good at the center of Rotor, but it was good for reputation, so I did this. I am satisfied with the price. Although the braking force is unlimited and impossible, I think that it is good for ADDRESS V100 View detail
Fits: HONDA GB250 CLUBMAN, HONDA ToRAN Salve 600V, HONDA CUB PRESS, HONDA XL250 S, HONDA XL250 R, HONDA NX650Dominator, HONDA CBX250 RS
OEM Product and the like. Effectiveness, low price but no complaint
【What made you decide the purchase?】
The price was the cheapest in Brake Shoe that conforms to a favorite car
【How was it actually used?】
The effect is almost the same as OEM Product. Only the stepped and stepped buns will work.
I exchanged it with the OEM Product's remaining amount still, but the experience did not change before and after the exchange.
【Was it difficult to install? (Hard parts case)】
I did it at Tire exchange specialty store. (The wage is 3,240 yen including tax, about 10 minutes required)
【Please tell me the point of installation and hang (in the case of Hard parts)】
Removing Brake dust that has accumulated over the years with Parts cleaner
[Is there anything I was disappointed about?] Nothing in particular
【Hope for Manufacturer - Please let me know if you have any improvement points]
I thought that it would be good if I was attached with durability and the presence or absence of use of Asbestos, etc. on the material side and performance comparison table etc
【Have you compared items?】
KITACONon Fade Brake Shoe, NTB products
[Others]
It is a product with high Cost performance, no problem in terms of performance as it does not change from the original OEM Product
View detail