Reviews
Fits: SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI Verde (VERDE), SUZUKI Verde (VERDE), SUZUKI Verde (VERDE), SUZUKI STREET MAGICII (STREET MAGIC II), SUZUKI STREET MAGIC (STREET MAGIC), SUZUKI STREET MAGIC, SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIL COMBINATION BRAKE (LETS Two Elle Combination Brakes), SUZUKI LetsIIL (LETS Two L), SUZUKI LetsIIL (LETS Two L), SUZUKI LetsIIG (LETS Two Gee), SUZUKI LetsIIG (LETS Two G)
May be good
Replaced because of squealing at OEMNORMAL. The effect seems to be no more or less than NORMAL. I'm hoping to see how well Life does. View detail
good job
It is a little difficult to stretch it, but if you stretch it carefully and slowly
Despite being an amateur, it was a moderately well done job.
View detail
Fits: SUZUKI DR250R, SUZUKI Volty Type T (Volty Type T), SUZUKI Volty Type T (Volty Type T), SUZUKI Volty typeT, SUZUKI Volty typeI (VOLTY Type1), SUZUKI Volty typeI, SUZUKI Volty typeC, SUZUKI ST250, SUZUKI ST250, SUZUKI Intruder LC250 (INTRUDER), SUZUKI Grass Tracker BIGBOY (GRASS TRACKER Big Boy/GRASS TRACKER Big Boy 10th Anniversary MODEL), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker (GRASS TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI GOOS (GOOSE)
With O-Ring
I wanted the LargeSmall O-Ring to be attached. I would like to replace the inside O-Ring because of this. View detail
Fits: KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI GPZ900R, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI Ninja 1000 (NINJA), KAWASAKI Ninja 1000 (NINJA), KAWASAKI Ninja 1000 (NINJA), KAWASAKI NINJA ZX12R (NINJA), KAWASAKI NINJA ZX12R (NINJA), KAWASAKI Z750, KAWASAKI Z750, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI ZR750S, KAWASAKI ZRX, KAWASAKI ZRX
Sufficient for use.
When replacing the rubber on the front footpeg, we only had one OEM product on hand, so we purchased the N, T, and B products for one side of the footpeg.
At a glance, there is no difference between the front and back of the product and the OEM Product.
The only difference? The only difference is that the OEM Product is glossy (anti-degradation? N,T,B are still in rubber, N,T,B have a die-cut mark and a mark on the back side. and there is an engraving on the reverse side.
Ninja 1000, but when placed side by side with the OEM, the product length is about 1mm shorter on the tip side.
Installation was completed without any problems, with Screw fastening to match the Base.
The conditions of use (straddling) are no different.
View detail
Fits: HONDA TRAIL110 (Trail), HONDA Z50J, HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA TRAIL110 (Trail), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA TRAIL110 (Trail), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service)
CUB Front brake
The front brake had too much play and could no longer be adjusted, so it was replaced with this product.
I thought I would try it. I haven't replaced it yet, so I don't know how it will work, but I commute Main
So I think Large is sturdy.
View detail
Fits: YAMAHA Zr SUPER JOG (SUPER JOG), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA SR125, YAMAHA SR125, YAMAHA SEROW XT225 (SEROW), YAMAHA SEROW XT225 (SEROW), YAMAHA RZ50, YAMAHA RZ50, YAMAHA Mate/Mate DELUXE (MATE/MATEDELUXE)
I used it for YamahaBRONCO.
We chose it because it was cheaper than OEM.
Regarding Brake Performance
I don't see any difference between OEM and Large.
For durability, see ・・・・?
I don't know as it is after installation. I guess we will see the result at the next exchange.
View detail
Fits: HONDA CD50, HONDA BENLY CL50 (BENLY50), HONDA Broad (BROAD), HONDA CBX125F, HONDA CBX125F, HONDA CBX125C, HONDA CBX125C, HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA CBX125C, HONDA CBX125C, HONDA Broad 90 (BROAD), HONDA CABINA (CABINA), HONDA CABINA 90 (CABINA), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic
For WINE AY-02
It looks like a normal Brake Shoe.
The diameter of the shoe may be a little too large if the adjustment nut is not set back far enough.
for Front is →NTB:?A6-BSGY1 Brake Shoe
View detail
Fits: YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA JOG (JOG), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Giorno・SPECIAL Knife, HONDA Giorno, HONDA Giorno, HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER)
For WINE AY-02
It was like a normal Brake Shoe.
for Rear is →NTB:?A6-BS121 Brake Shoe
View detail
Beware of Size Mistakes
[How is it used?
When replacing the blinker of XJR400R, I had to cut off the Bullet Terminal of the blinker to pass the wiring through the blinker bracket, so I needed a new Bullet Terminal.
How was your experience with it?
The Bullet Terminal could not actually be used because it was not the same size as the original Bullet Terminal.
How did it compare to other products?
The Size I wanted to buy was available at Home center for the same price, so this product is not a special bargain.
[Points to note]
The number of pieces was not listed here, but the Quantity:1 Set of 10pcs.
Items to buy together:Electric Works Pliers
View detail
Fits: HONDA CBX125C, HONDA CBX125C, HONDA CBX125F, HONDA CBX125F, HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA NSR50, HONDA NSR80, HONDA NSR80, HONDA NSR80
Used for NSR50 ForkOH.
The price is lower than that of OEM Product.
In addition, we did not find anything inadequate when using the product.
View detail
Fits: HONDA Z50J, HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB)
A very good purchase!!
I bought it overseas for repairing my love Little Curve, which I have had for nearly 10 years. I had all the parts I needed, and various parts are also on sale, so it was very tasty. I am still installing, but the picture and product are the same~ It's also very fast^^ I bought it overseas for repairing my love Little Curve, which I have had for nearly 10 years. I had all the parts I needed, and various parts are also on sale, so it was very tasty. I am still installing, but the picture and product are the same~ It's also very fast ^^ View detail
Fits: HONDA Broad (BROAD), HONDA CABINA (CABINA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY(SCOOPY CREA), HONDA crea SCOOPY(SCOOPY CREA), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i Special (SCOOPY CREA i SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA Dio (DIO), HONDA Dio (DIO)
Same as OEM Product etc.
No different from OEM Product. And durability?
There is no cosmetic Merit as the price is the same.
View detail
Fits: HONDA Ape (50)(APE), HONDA PCX, HONDA BENLY50, HONDA PCX, HONDA PCX, HONDA PCX, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA NS-1, HONDA nighthawk 250 (Night Hawk), HONDA NS-1, HONDA NS-1, HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA MAGNA 50 (MAGNA), HONDA LEAD50 (LEAD), HONDA LEAD50 (LEAD), HONDA LEAD100 (LEAD), HONDA LEAD125 (LEAD)
Used to repair the PCX.
[How is it used?
Oil was seeping from the front suspension of my 2012 PCX.
I should have overhauled it right away because if the oozing oil adheres to the caliper or brake disc, it could cause a problem that should not have happened.
Currently, the blotchiness is not that much worse, so I wonder if it was minor.
I haven't heard that the previous owner did an overhaul of Front fork, so it's probably 10 years old.
Was the one you received as per Image?
As per Image
I chose NTB's OEM parts, which were slightly cheaper than the OEM parts and were in stock at Webig. No problem at all.
Was the installation difficult?
It was surprisingly easy. I had all the tools I needed, so I was able to overhaul it according to the textbook without any difficulty.
I worked from youtube and this Magazine article.
https://www.webike.net/magazine/maintenance/maintenance-undercarriage/79110/
How was your experience with it?
This is not a part for comfort or appearance.
But in such cases, it feels good to replace the whole set.
If you buy all the small parts, it will cost you a lot of money, but...
View detail
Fits: HONDA Monkey Limited (MONKEYLIMITED), HONDA SUPER CUB 110 (SUPER CUB), HONDA Monkey (MONKEY), HONDA ZOOMER (ZOOMER), HONDA ZOOMER, HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA SUPER CUB 110 (SUPER CUB), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA LITTLE CUB (LITTLE CUB)
Mirror adapter.
Acquired for moto Honda Monkey. Once again I take these adapters and once again I have to edit the internal thread. The price of adapters is rising, but unfortunately there is no alternative. Sadness... Acquired for moto Honda Monkey. Once again I take these adapters and once again I have to edit the internal thread. The price of adapters is rising, but unfortunately there is no alternative. Sadness... View detail
Fits: HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R, HONDA XR250R
try and see it for what it is
I looked at the air filter on my XR250 (MD30) and found that the 10 year old twin air was getting close to its limit.
Make it a Twin Air Filter-only supply.
K&NFilter.
Return to OEM
OEM equivalent AfterMarket products that are close to the original.
When I thought about it, I assumed that I would put it in NORMALCase, and I am setting the carburetor in Twin air, but if I go back to OEM, I will need to re-set it again, so I can't help but have a little gap, but I don't want to have large width setting, so I decided to use ? I'm going to use ? and ? So I thought about it with ?
The less sticky the inside of CleanerCase is, the better. So I decided to go with the ? The cost of the tire, tube, and rim band was too high, so I decided to go with the ? I decided to go with ?
So I saw a picture of NTB's XLR250 cleaner and it looked K&NFilter chic, so I bought it.
When I looked through the Filter in the sun, the Filter section was thicker than the K&NFilter, but it seemed to be more efficient.
The thickness of the CleanerSize is a little thin, so the Bracket of the Stopper is rattling, so I bent it a little to make it stronger and it became better.
However, it didn't fit well, so I looked at it on GlassTable and found that the hitting surface was slightly distorted.
So, I bent the hitting surface to fix it. Once I fixed it, it was perfect. That's where I wanted the accuracy to be.
That's where Minus1 comes in.
When I ran it, it was a summer setting, but it wasn't bad in the winter either, so I thought it was a winner. I felt that it was a hit.
It's cheap, so if it's good for the Season, it's Repeat.
If not, I'll think about it again.
View detail
Wrong size
The clamp that holds the hose on the rear brake reservoir tank was rusted out, so I bought this to replace it, but I actually needed a larger one.
I had no choice but to replace the fuel filter clamp attached to the fuel hose, which was also damaged. The product itself is the same as the hose clamp sold at the gardening supply corner in the home center for about 1pc. 80 yen, but since I got it cheaper than that, I decided to call it good. It's very easy to use, just pinch it with radio pliers and spread it out while attaching it to the hose.
I bought the hose clamp for the reserver tank at Home center and installed it to the right size.
View detail
Fits: YAMAHA ZEAL (FZX250 ZEAL), YAMAHA XV750, YAMAHA XV1100, YAMAHA XJ600S, YAMAHA XJ400L, YAMAHA XJ400S, YAMAHA SRX400, YAMAHA SRX600, YAMAHA Renaissa (RENAISSA), YAMAHA Renaissa (RENAISSA), SUZUKI SAVAGE (SAVAGE), YAMAHA Renaissa (RENAISSA), SUZUKI SAVAGE (SAVAGE)
front fork seal
as per specification. good product good product good product good product good product good product good product good View detail
Fits: YAMAHA TRICITY (BirdCity), YAMAHA Tricity155
Seat for Repair reupholstery with good cost performance
I decided to reupholster it because the seam between the Seat and the Passenger was fraying and a gap was forming.
BirdCity's OEMSeat is made of fine uneven fabric in the front and smooth fabric in the back, but this one is really for repair and is made of artificial leather which is common in old style motorcycle.
The texture is not great, it's not as good as it looks from OEM, but it's better than having tears.
I tried to hit it with Hammer, but I couldn't do it well, so I pushed it in with Water pump pliers.
View detail
Fits: SUZUKI Intruder LC250 (Intruder), YAMAHA TZR250, KAWASAKI VULCAN 800 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN 800 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN 800 (VULCAN400), KAWASAKI VULCAN 1500 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN, KAWASAKI ESTRELLA (ESTRELLA), KAWASAKI VULCAN, KAWASAKI ESTRELLA (ESTRELLA), KAWASAKI ESTRELLA, KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI ZEPHYR 750 (ZEPHYR)
Easily obtainable OEM compatible Lever
I bought it because I accidentally broke Lever with SlipDown.
The most Large reason why I chose NTB is that it also comes with the Parts for the Master Cylinder side rather than Dial which adjusts the Lever distance.
There are many repair levers in the world such as the one made by KIJIMA, but they only come with the outside of the adjustment dial.
Moreover, it is troubling that only the root part is not changed by Single Item, but is treated as OEM Parts.
In such a situation, if it is a brake lever made by NTB, the fundamental part is also Quantity:You can buy it at Set.
View detail
A little heavy, but cheap as hell!
[How is it used?
I bought this product because it was cheap enough to build a spare wheel from used parts.
How was your experience with it?
It is obviously heavier than the high-end Duralumin products.
However, if you play in the mountains, you won't feel the demerit of being heavy, so it is a sufficient product for me Level riders.
How did it compare to other products?
The prices are so different that I don't know how to compare them...
It looks like "Cheap Iron Sprocket." The design is as it is, so I don't think people who want to dress-up will be able to compare their purchase from the beginning.
If you have your heart set on saving weight... "Iron Sprocket not aggressive about meat removal." I don't think this is another purchase comparison as it looks just the same.
But I think the fact that it's still being lined up means there's a demand for it (maybe there's a certain amount of people like me who buy it).
I don't think you can complain about cheapness & durability.
[Points to note]
Functionally, there are no Points to note, but if you are discovered by someone who is mounting anything "What's this? What's with this cheesy Sprocket?" What a mouthful... I don't think there's anyone like that in the world...
For those who don't care, it doesn't matter.
0Other items that may be useful include
【Included Parts:presence or absence】.
None Sprocket only, you can reuse the Bolt that came with it or order an OEM Bolt.
[ITEMS TO BUY TOGETHER
The Sprocket that I used to use is Worn out and replaced. I think Chain has reached the end of its life if it was
Let's replace it with a new one and Refresh the drive system.
[Opinions and requests to Manufacturer
Keep making them as long as you can.
View detail