![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPS-016F_TS.jpg)
Fits: SUZUKI Bandit 1250S ABS (BANDIT), SUZUKI Bandit 1250S ABS (BANDIT), SUZUKI GSX1400, SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI GSX1400, SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI Bandit 1250S ABS, SUZUKI Bandit 1250 ABS (BANDIT), SUZUKI Bandit 1250 ABS (BANDIT)
OEM compatible Sprocket
BANDIT1250 F total mileage 85750km,Recently, I was concerned because the Chain was making a clattering noise.
Since I am a novice mechanic, I enjoyed replacing bearings and tires by trial and error, but when I inspected the front sprocket, I realized it was time to replace it. So I went to Webig and searched for parts and found OEM products and interchangeable parts. After considering how long I would be driving the car, I decided to go with the interchangeable parts.
To replace it, we had to have more Socket on hand, but we replaced it successfully and immediately ran a TEST run.
As I thought, the noise of the Chain disappeared and it became quiet and smooth. I will be able to go out for touring this Season with peace of mind.
View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPY-016F_TS.jpg)
R1-ZSprocket
I was worried about compatibility since it is not an OEM Product, but it came on perfectly. View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/109985/news.00724.00000004_TS.jpg)
Installed on ESTRELLA2014
I was able to install it on ESTRELLA2014MODEL.
2014MODEL (or later? up to Final?) is fixed with a square nut, unlike previous MODELs, so we used a 22mm octagonal socket and an Impact wrench to replace it.
I found an article on the Net that said the generator cover (the one with the inverted triangle) had to be removed, but we were able to replace it without removing it.
I am very satisfied.
View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPS-008F_TS.jpg)
We have substituted OEM Product.
I have not driven that many miles, but I have used it without any problems. View detail
![sprocket](https://global.webike-cdn.net/photo/impression/cc/cc91d2c249bdcae0fde1940618fc7208L.jpg)
Trust is Steel.
OEM compatible, OEM same etc. quality.
Aluminum is certainly lighter and looks better, though. Steel is more durable.
Considering this, the cosmetics market is dominated by this product.
good point
OEM quality and performance.
High durability.
High cost performance.
●Front, so replacement is easy.
I don't think that OEM is the best choice for everything, but for parts that require durability, such as Sprocket and Chain, I think OEM or OEM-alike parts are better.
Manufacturers use those parts for their durability.
View detail
![Sprocket](https://global.webike-cdn.net/uiu/impression/202111/21_1019341_619a55a0559e9.jpg)
Fits: SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (GRASS TRACKER), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (GRASS TRACKER Big Boy/GRASS TRACKER Big Boy 10th Anniversary MODEL), SUZUKI Intruder LC250 (INTRUDER), SUZUKI ST250, SUZUKI ST250, SUZUKI Volty typeC, SUZUKI Volty typeI, SUZUKI Volty typeI (VOLTY Type1), SUZUKI Volty typeT, SUZUKI Volty Type T (Volty Type T), SUZUKI Volty Type T (Volty Type T)
![ru](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/ru.gif)
Suzuki grass tracker big boy
I did not expect that there would be such mega-fast delivery via FEDEX (I chose express): I placed an order for 4 parts on 10/30/21, received it on 11/11/21 (I live in the Urals). I figured it out on my own star - the seat is the same. Unlike the native star, the profile of this star itself is simpler (it is even, you can see it yourself from the photo). I will install in the spring together with a driven sprocket, chain and oil filter, which I also ordered on webike.com ------------------------------ ---------------------------- I did not expect that mega-fast delivery through FedEx (chose Express): An order for 4 details was issued on 10/30/21, I received 11.11.21 (I live in the Urals). I figured the native star - the landing place coincides. Unlike the native star, the profile of this star is easier (he is even, they see it yourself). I will put spring together with a slave star, chain and an oil filter that also ordered on webike.com View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPY-002F_TS.jpg)
Purchased by mistake.
I bought the wrong model for my car.
Everyone should be very careful with their purchases.
I have been using SUNSTAR for my Sprocket and Brake rotor since I started riding Motorcycle.
They are a little more expensive than OEM Parts, but I think they are more reliable.
View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPY-002F_TS.jpg)
Purchased by mistake.
I bought the wrong model for my car.
I think the thing itself is good.
View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPY-002F_TS.jpg)
I bought it by mistake.
I was going to put it on my D Tracker 125 but for some reason I bought this product which doesn't fit.
It was completely my mistake, so I will be careful afterwards.
View detail
![Sprocket](https://global.webike-cdn.net/images/reviews/378/00001018378L.jpg)
Fits: HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 60th Anniversary/STREET, HONDA SUPER CUB 50, HONDA CROSS CUB50, HONDA CROSS CUB50, HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS)
![ru](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/ru.gif)
Drive sprocket for Honda Super Cub 50 (AA04)
The quality of the star is fire! After all, it will last much longer than the Chinese one. In the city of Barnaul, I visited probably 20 stores and no one could help ordering stars and a chain for a Honda Super Cub 50 (AA04) scooter. I searched the Internet, found this site, then read the reviews (and they were contradictory and some disappointing). When ordering, you can see how much the remainder is - and where a few pieces in total in the remainder were not considered. According to reviews - delivery to the addressee in Russia - 2 months. Delivery to Barnaul is 50 days. Dispatched the next day after payment. the track was tracked for 2 days to the port, then a month of silence. Then from Vladivostok I went by train to Moscow for 2 weeks and a week to Barnaul. I did not put it yet, I took it in reserve. -------------------------------------------------- -------- The quality of the star is fire! After all, it will last much longer than the Chinese. In the city of Barnaul went through probably 20 stores and no one could help me order sprockets and chains on my Honda Super Cub 50 (AA04) scooter. I scoured the internet, found this site, then read the reviews (and they were contradictory and some disappointing). When ordering, you can see how much is left - and where a few pieces of everything in the remainder did not consider. According to reviews, delivery to the addressee in Russia - 2 months. To Barnaul delivery 50 days. Sent the next day after payment. Tracked for 2 days to the port, then a month of silence. Then from Vladivostok went by train to Moscow for 2 weeks and a week to Barnaul. I haven't put it in yet, I took it as a spare. Powered by www.DeepL.com/Translator View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPK-002F_TS.jpg)
Fits: KAWASAKI GPX250R-II, SUZUKI GSX250FX, KAWASAKI ZZR250, SUZUKI 250SB, KAWASAKI ZXR250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZZR250, KAWASAKI ZXR250, KAWASAKI KLE250 ANHELO, KAWASAKI ELIMINATOR 250 (Eliminator), KAWASAKI BALIUS (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI D-TRACKER (TRACKER), KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI GPZ250R
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Long life
I'm amazed that it's 30,000km old and there's no signs of wear.
Since we haven't made any changes from the OEM chiming, there is no difference in performance, but the strength of Steel is still reassuring.
For everyday use, I'd prefer a Steel like this instead of the higher-end Tungsten or Duralumin.
The downside is the surface treatment - the same with Rear Sprocket, but the whole thing is textured, so the Oil clings to it well and it doesn't clean up very well.
View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPH-003F_TS.jpg)
Fits: HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA Ape(100)(APE), HONDA BENLY CD90 (BENLY50), HONDA MONKEY125, HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Iron Sprocket for utility vehicles
I bought it to replace my LITTLE CUB rusted out Sprocket.
It's a simultaneous front and rear replacement with the Chain.
We decided that for a practical car, it would be a steel Sprocket with a focus on durability.
I opted for this inexpensive and robust product.
I didn't rate the durability because I wouldn't know until I drove it a considerable distance.
I'm hopeful that I won't have to replace it for a while.
View detail
![sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPY-022F_TS.jpg)
When in doubt, this is it
The NTB NTB Sprocket caught my eye, so I bought it on impulse this time.
As far as usability goes, I think it's safe to say that it's neither acceptable nor unacceptable
Maybe there are better products out there if you look for them, but as I am now
I'm under the impression that it doesn't have to be such a high quality product
The quality of the product itself is guaranteed to some extent, so if anyone is struggling with it, you might want to pick it up.
View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPH-003F_TS.jpg)
Fits: HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA Ape(100)(APE), HONDA BENLY CD90 (BENLY50), HONDA MONKEY125, HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
When in doubt, this is it
I bought the NTB NTB Sprocket this time and would like to Impression it.
The product is in line with the previous reviews I see on the net.
The quality of the product itself is guaranteed to some extent, so if anyone is struggling with it, you might want to pick it up.
View detail
![front sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPH-066F_TS.jpg)
Fits: HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA GORILLA (GORILLA), HONDA DREAM50 (DREAM), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Z50J
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
I used it for my CB50S Restore
I used it for my CB50S Restore.
I chose this inexpensive product.
At the same time, the chain is exchanged.
I couldn't compare it to the OEM condition because I didn't drive it, but it works fine.
View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPH-003F_TS.jpg)
Fits: HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA Ape(100)(APE), HONDA BENLY CD90 (BENLY50), HONDA MONKEY125, HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
It's on Grom!
Because Grom's Chain has been cut off, Sprocket and Chain and Quantity:I replaced it with 1 Set of 3-items, especially since NTB products were cheap anyway I'm not picky and went with this product No problems at all so far! View detail
![sprocket](https://global.webike-cdn.net/photo/impression/1d/1d96c1e5120cd66c02a02dc534169aa0L.jpg)
Used to Refresh the car body
TW200 (2JL) Used for
The body was purchased used and replaced because it was over the wear limit
We chose this product because it has a high level of reliability and cost performance with a proven track record in OEM OEM
2JL has to remove the LEngine Cover to become a Driven Sprocket Access is not possible, and the maintenance is difficult..
View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPY-010F_TS.jpg)
Same as OEM Product etc.
I bought Front, Rear and Chain together to replace them and replaced them
As reviewed by others, the OEM Product has a Rubber in between I was confused because I read that it was noisy, but in fact, there was no problem at all I think the product is the same as the OEM Product I think the product is the same as the OEM Product I think the price is cheap and the manufacture is solid I think that the product of NTB here can go well at all
View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPH-018F_TS.jpg)
Fits: HONDA X4, HONDA X4, HONDA X4, HONDA CB750FB BOLDOR 2 (BOLDOR), HONDA CB750F BOLDOR 2 (BOLDOR), HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB1300 SUPER TOURING <ABS>/CB1300 SUPER TOURING <ABS> Special Edition (SUPERTouring), HONDA CB1300 SUPER TOURING <ABS> (SUPERTouring), HONDA CB1300 SUPER FOUR <ABS> (SUPER FOUR), HONDA CB1300 SUPER FOUR <ABS> (SUPER FOUR), HONDA CB1300 SUPER FOUR <ABS>., HONDA CB1300 SUPER FOUR <ABS>., HONDA CB1300 SUPER FOUR(SUPER FOUR), HONDA CB1300 SUPER FOUR SP(SUPER FOUR), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CB1300 SUPER FOUR (SUPER FOUR), HONDA CB1300 SUPER FOUR (SUPER FOUR)
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
To convert Chain
I used it for RC 04. It is a material like OEM so it seems to be used for a long time. Installation is commonplace but it is easy with a pon attachment (^ ^; Because the price is also cheap, I think that it is good to change the number of teeth. View detail
![Sprocket](https://img.webike-cdn.net/catalogue/images/73267/SPH-027F_TS.jpg)
Fits: HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA X-11., HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
NTB Sprocket
Purchased for drive system Refresh of my car Black Bird.
I personally talk about preferences, but I do not like to use the Parts that have taken too much Shiningly Anodized for driving system, so I chose this rugged.
There is no problem with mounting accuracy, it seems to be safe to use Sprocket with high durability.
The crucial driving comfort is no problem, and my favorite cars in the drive system are like riding comfort like the BELT DRIVE Motorcycle.
View detail