Reviews
Fits: SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI STREET MAGICII (STREET MAGIC II), SUZUKI STREET MAGICII (STREET MAGIC II), SUZUKI LetsII (LETS Two)
ZZ
[How is it used?
Town ride
How was your experience with it?
It has become quite Smooth!
How did it compare to other products?
I think it's cheap and good.
View detail
Fits: YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO)
sa-26j
I installed it on a REMOTE CONTROLLERVINOsa-26j that was given to me by a friend.
The replacement time is about 60 minutes even for an amateur, including cleaning of the inside of the case.
Torque tightening is Primary 30Nm Clutch housing 40Nm.
View detail
Fits: HONDA Giorno Crea, HONDA Giorno Crea, HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart・Dio DX, HONDA Smart・Dio DX (SMART DIO), HONDA Smart・Dio DX (SMART DIO), HONDA Smart・Dio DX (SMART DIO)
AF57 Honda SMART DIO Weight roller6g
I used a 8g weight roller last time, but 6g is not too bad. It is a little sluggish at the start, but after 2 seconds, it accelerates quickly. If you use it with High Speed Pulley, you can accelerate without worrying about the flow of cars. View detail
Fits: HONDA BENLY (BENLY50), HONDA BENLY (BENLY50), HONDA BENLY PRO (BENLY50PRO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio cesta (DIO CHESTA), HONDA Dio cesta (DIO CHESTA), HONDA Dio Cesta (DIO CHESTA), HONDA Dio Cesta (DIO CHESTA), HONDA Dio Cesta (DIO CHESTA), HONDA Dio Special (DIOSPECIAL Knife), HONDA Dio Special (DIOSPECIAL Knife), HONDA Giorno, HONDA Giorno Crea, HONDA Giorno Deluxe (GIORNO DX), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY)
For BENLY50AA05
Purchased because I ran out of Clutch Shoe.
We chose this instead of OEM to shorten the work time.
It's working fine.
View detail
Fits: HONDA Broad (BROAD), HONDA CABINA (CABINA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY(SCOOPY CREA), HONDA crea SCOOPY(SCOOPY CREA), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i Special (SCOOPY CREA i SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA Dio (DIO), HONDA Dio (DIO)
Same as OEM Product etc.
No different from OEM Product. And durability?
There is no cosmetic Merit as the price is the same.
View detail
A little heavy, but cheap as hell!
[How is it used?
I bought this product because it was cheap enough to build a spare wheel from used parts.
How was your experience with it?
It is obviously heavier than the high-end Duralumin products.
However, if you play in the mountains, you won't feel the demerit of being heavy, so it is a sufficient product for me Level riders.
How did it compare to other products?
The prices are so different that I don't know how to compare them...
It looks like "Cheap Iron Sprocket." The design is as it is, so I don't think people who want to dress-up will be able to compare their purchase from the beginning.
If you have your heart set on saving weight... "Iron Sprocket not aggressive about meat removal." I don't think this is another purchase comparison as it looks just the same.
But I think the fact that it's still being lined up means there's a demand for it (maybe there's a certain amount of people like me who buy it).
I don't think you can complain about cheapness & durability.
[Points to note]
Functionally, there are no Points to note, but if you are discovered by someone who is mounting anything "What's this? What's with this cheesy Sprocket?" What a mouthful... I don't think there's anyone like that in the world...
For those who don't care, it doesn't matter.
0Other items that may be useful include
【Included Parts:presence or absence】.
None Sprocket only, you can reuse the Bolt that came with it or order an OEM Bolt.
[ITEMS TO BUY TOGETHER
The Sprocket that I used to use is Worn out and replaced. I think Chain has reached the end of its life if it was
Let's replace it with a new one and Refresh the drive system.
[Opinions and requests to Manufacturer
Keep making them as long as you can.
View detail
Purchased by mistake.
I bought the wrong model for my car.
Everyone should be very careful with their purchases.
I have been using SUNSTAR for my Sprocket and Brake rotor since I started riding Motorcycle.
They are a little more expensive than OEM Parts, but I think they are more reliable.
View detail
Purchased by mistake.
I bought the wrong model for my car.
I think the thing itself is good.
View detail
I bought it by mistake.
I was going to put it on my D Tracker 125 but for some reason I bought this product which doesn't fit.
It was completely my mistake, so I will be careful afterwards.
View detail
Belt replacement for SE44J
I used them on my CYGNUS, replacing Belts that I had used for 10 years and 23,000 km. I don't know how durable Belts are unless you use them for a long time, but they seem to be of good quality. I hope it will be cheaper because it is Other Brand Product, but I hope it will be more durable. View detail
Fits: KAWASAKI GPX250R-II, SUZUKI GSX250FX, KAWASAKI ZZR250, SUZUKI 250SB, KAWASAKI ZXR250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZZR250, KAWASAKI ZXR250, KAWASAKI KLE250 ANHELO, KAWASAKI ELIMINATOR 250 (Eliminator), KAWASAKI BALIUS (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI D-TRACKER (TRACKER), KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI GPZ250R
Long life
I'm amazed that it's 30,000km old and there's no signs of wear.
Since we haven't made any changes from the OEM chiming, there is no difference in performance, but the strength of Steel is still reassuring.
For everyday use, I'd prefer a Steel like this instead of the higher-end Tungsten or Duralumin.
The downside is the surface treatment - the same with Rear Sprocket, but the whole thing is textured, so the Oil clings to it well and it doesn't clean up very well.
View detail
Longevity.
I bought it with the same chin as the OEM Product.
This is a general-purpose steel sprocket. Duralumin's lightweight sprockets are available, but Steel has the edge in durability.
It's been 30,000km since the replacement, but it's still working.
The Steel is heavy, but if you're not a motorcyclist who cares about weight under Spring, it's nothing to worry about.
There's only one disappointing part.
The surface is textured with a pear or shagreeness treatment. When chain oil gets mixed with it, it is hard to remove. Cleaning is strange.
View detail
Fits: HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA Ape(100)(APE), HONDA BENLY CD90 (BENLY50), HONDA MONKEY125, HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Iron Sprocket for utility vehicles
I bought it to replace my LITTLE CUB rusted out Sprocket.
It's a simultaneous front and rear replacement with the Chain.
We decided that for a practical car, it would be a steel Sprocket with a focus on durability.
I opted for this inexpensive and robust product.
I didn't rate the durability because I wouldn't know until I drove it a considerable distance.
I'm hopeful that I won't have to replace it for a while.
View detail
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Iron Sprocket for durability
I purchased this as a replacement wear and tear maintenance for my LITTLE CUB.
The front and rear Sprocket and Chain are exchanged simultaneously.
The iron Sprocket is heavy and heavy, but it's durable enough for that.
It's promising. It doesn't look too ornate, but for a practical car, this is it.
That's enough.
The price was inexpensive and the cost was high.
I'm going to take the long view and see how long it will last.
View detail
If you're not particular about it, it's OK.
I can use it without any problems.
If you're not particular about it, it's durable enough to put on and large.
It's a commuter Motorcycle and I've been fine riding it every day since I changed it.
It's possible if you want it cheap.
View detail
Fits: YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA VOX (Box), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA Vino Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA VINO Molfe (VINO Molar feh), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO)
Not an OEM product, but the installation accuracy is good
They didn't carry OEM parts, so I bought this one
The installation accuracy was good
As for durability, we'll see
View detail
Used to Refresh the car body
TW200 (2JL) Used for
The body was purchased used and replaced because it was over the wear limit
We chose this product because it has a high level of reliability and cost performance with a proven track record in OEM OEM
2JL has to remove the LEngine Cover to become a Driven Sprocket Access is not possible, and the maintenance is difficult..
View detail
Used for Vehicle Refresh
TW200 (2JL) Used for
When I bought the body used, the Sprocket and Chain had reached their wear limits, so I replaced them
As an OEM OEM brand, we adopted this brand with no problems in terms of cost
View detail
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Renaissa (RENAISSA), YAMAHA Renaissa (RENAISSA), YAMAHA Renaissa (RENAISSA), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
As much as the OEM Product
I think it's as well made and performed as the OEM product
The product was solid and sturdy, with no BALI, and the OEM product and price were very reasonable I chose this one from NTB, which is not much different I have it in stock and didn't have to wait long for it to arrive
View detail
Same as OEM Product etc.
I bought Front, Rear and Chain together to replace them and replaced them
As reviewed by others, the OEM Product has a Rubber in between I was confused because I read that it was noisy, but in fact, there was no problem at all I think the product is the same as the OEM Product I think the product is the same as the OEM Product I think the price is cheap and the manufacture is solid I think that the product of NTB here can go well at all
View detail