Reviews
Soft, flexible and easy to use!
The material is soft and easy to put in and out of the wiring. It is also resistant to deterioration even when exposed to ultraviolet rays! It is easy to use, durable and Large satisfaction! View detail
Used for GOOSE350
Diversion of the product for GOOSE as there is no Other Brand Product for the car model.
Cable length seems to be slightly longer.
The Meter gear side is reluctant to move, so it has already been broken three times, but there are no dedicated parts, so there is nothing we can do about it!
Incidentally, Inazumaetc. made by the company can also be used.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI GPZ900R For Malaysia Market, KAWASAKI GPZ900R For Malaysia Market
Being kept in reserve.
I purchased this as a spare part for my beloved GPZ900R.
I hope NTB will continue to manufacture them.
View detail
I purchased and used it with Male out of necessity.
To be honest, I am at a loss to explain or comment on these parts, but they are working normally.
I am posting this because I think there are quite a few people who Review.
View detail
Fits: HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR
It is rather troublesome when it is cut off.
Purchased for VTR250 to use on VT250 SPADA as OEM Product is discontinued.
The workmanship is indistinguishable from that of an OEM Product and can be used normally.
We chose this one instead of the OEM one because of its slightly lower price. We always keep this one in stock as a spare in case of emergency.
If it runs out before you know it, you may not know the distance and may lack Gas. The most important thing is to take care of it on a regular basis.
View detail
Beware of Size Mistakes
[How is it used?
When replacing the blinker of XJR400R, I had to cut off the Bullet Terminal of the blinker to pass the wiring through the blinker bracket, so I needed a new Bullet Terminal.
How was your experience with it?
The Bullet Terminal could not actually be used because it was not the same size as the original Bullet Terminal.
How did it compare to other products?
The Size I wanted to buy was available at Home center for the same price, so this product is not a special bargain.
[Points to note]
The number of pieces was not listed here, but the Quantity:1 Set of 10pcs.
Items to buy together:Electric Works Pliers
View detail
Fits: HONDA Z50J, HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 STD (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 DX (SUPER CUB), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 BUS (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB), HONDA SUPER CUB 50 (SUPER CUB)
A very good purchase!!
I bought it overseas for repairing my love Little Curve, which I have had for nearly 10 years. I had all the parts I needed, and various parts are also on sale, so it was very tasty. I am still installing, but the picture and product are the same~ It's also very fast^^ I bought it overseas for repairing my love Little Curve, which I have had for nearly 10 years. I had all the parts I needed, and various parts are also on sale, so it was very tasty. I am still installing, but the picture and product are the same~ It's also very fast ^^ View detail
Refreshing the appearance of Wiring.
The RoseRose Wiring can be wrapped neatly, and the appearance becomes Refreshing. It's easy to install and efficient because you don't need to use any tools. This Spiral Tube is indispensable for the installation of the electrical components. View detail
Size is good.
The size is small but when you light up the blinker, it shines brightly and has a strong presence. View detail
Fits: YAMAHA TZR50R, YAMAHA Renaissa (RENAISSA), YAMAHA TZR50R
To YamahaRENAISSA
I replaced the meter cable when I replaced the speedometer on my YamahaRENAISSA, I didn't need to replace the meter cable but I just did. View detail
Fits: HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR, HONDA VTR
OEM Looks
[How is it used?
The VTR250 that I prepared to start Gymkhana.
Because it was the vehicle which was too cheap and was too battered, I thought to do maintenance before running for the time being, but it became fun to do maintenance custom, and I had to replace Handlebar & rarr;Meter cable and various cables. I had to replace the Handlebar & rarr;Meter cable.
Since the vehicle is not yet assembled, I'm giving it a 3 for now for durability.
I'm hoping to finish it up so I can ride it before 2019 warms up and Corona settles in.
Was the one you received as per Image?
OEM friendly looks.
I could have chosen something with a custom look, but I couldn't resist the ease.
Was the installation difficult?
I also replaced the headlight, so it was a little difficult to pull the cable around the top bridge.
Still, they fit together nicely.
How was your experience with it?
As I mentioned above, I haven't gotten it running yet because it doesn't have the security parts on it.
The original 2 that I started at the same time is finished earlier than the original 2, so even if I finish it, it might become a Gymkhana-only machine.
[Was there anything that disappointed you?
There is not. Even if there was, it is only a story that it is possible to put up with MONSTER S210 book.
View detail
Fits: HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service)
I'm glad I replaced it
I bought this as a replacement for my OEM Tail lamp cover that was cracked and faded. I was able to install it without any problems and it doesn't look out of place at all. It looks great and tightens up the whole vehicle. View detail
Fits: SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI WOLF 125 (Wolf), SUZUKI Volty typeT, SUZUKI Volty Type T (Volty Type T), SUZUKI Volty typeI (VOLTY Type1), SUZUKI Volty typeI, SUZUKI Volty typeC, SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 125 (VECSTAR), SUZUKI VanVan 200 (VANVAN), SUZUKI VanVaN 200Z (VANVAN), SUZUKI VanVan 200 (VANVAN), SUZUKI TL1000, SUZUKI TL1000, SUZUKI SV400, SUZUKI SV650, SUZUKI SV400
It's okay, I think.
Has the stop-lamp light been unstable lately? I checked to see what it was, and I suspect it's the Switch or Wiring area of the front brake.
It seems that there is no problem in the energization of the wiring, is it made by OEM Alps Electric? I ordered it to see how it works because the Switch of
The next day it arrived, I was surprised, when I replaced it, the problem was solved at once.
The difference between the OEMSpec. and the OEMSpec. is that the parts around the terminals and near the terminals do not seem to be waterproofed.
If it is used as it is and there is a problem, it will be disassembled, and the contact point and the energizing part will be cleaned, and I think that Maintenance will be done.
When energizing and investigating this time, when lighting is unstable, first of all, it may be the best to suspect Switch, when it is Single Body without installing Switch, it lights without a problem, but when I operate it after it is installed and fixed, it does not light, it blinked and became unstable.
Later, I disassembled the OEM, but it seems to be a distortion of the contact point or inaccuracy, and it depends on a slight angle of Lever to energize or contact failure.
The original installed OEMSwitch is not reusable for safety reasons.
I have experience with malfunction from dirt and degradation carbonization of contacts, but it is the first time that contact failure occurs from a slight distortion of Case or current-carrying parts.
It often revives when I polish the contact points and the energized parts and put them back together again, but it is a part that needs to be operated reliably.
View detail
Fits: KAWASAKI ZrX-II, KAWASAKI ZrX-II, KAWASAKI ZrX-II, KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 1100 RS (ZEPHYR), KAWASAKI ZEPHYR 1100 (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ELIMINATOR 400 (Eliminator)
It's expensive, but there's a Demerit.
I bought it with Front for the ELIMINATOR 250, the only difference between it and Front is that the Valve is Single.
The downside is also the same as for Front, the screws on the Lens fixation are low quality and rust quickly.
Also, the packing is sponge shaped and water accumulates.
Nevertheless, OEMAssy is too expensive and its cost performance is very high.
View detail
Fits: KAWASAKI ZrX-II, KAWASAKI ZrX-II, KAWASAKI ZrX-II, KAWASAKI ZrX-II, KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 1100 RS (ZEPHYR), KAWASAKI ZEPHYR 1100 RS (ZEPHYR), KAWASAKI ZEPHYR 1100 (ZEPHYR), KAWASAKI ZEPHYR 1100 (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR)
Water ingress.
ZEPHYR400's Reproduct, but I installed it on my ELIMINATOR 250.
The difference in appearance from Eliminator is just a little bit, the back end of the body is either sharp or flat. To be honest, I prefer this one to the Eliminator OEM which is flat.
However, in terms of performance, Double Bulb is used for Front for the position lamp and the Valve is a little higher than Single OEM.
The quality of the plating is good and not cheap at all, which I like, but there are two drawbacks:the screw is poor and it rusts easily. This is a Material:It should be replaced with Stainless Steel.
The other thing is that the packing with the Lens is squishy like Sponge, and it collects water in rainy weather. And there is no drainage hole, so if you don't drain the water sometimes, the Reflector will get rusty and the light will get darker.
This flaw is something that can be fixed quickly, but it couldn't be a perfectionist product.
View detail
Fits: HONDA HornetCB900F (Hornet), HONDA Hornet900 (Hornet), HONDA CL400, HONDA CBR929RR, HONDA CBR600FX, HONDA CBR600FS, HONDA CBR600FR, HONDA CBR600F4i, HONDA CBR600F, HONDA CBR1100XX, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA CB400 SUPER FOUR (Super FOUR), HONDA XRV750, YAMAHA XJR1300, YAMAHA XJR400RII, HONDA CB1300 SUPER FOUR <ABS>., HONDA CB1300 SUPER FOUR <ABS> (SUPER FOUR), HONDA XLR125R, HONDA XL1000V, HONDA XLR200R
Ordinary Switch
It was broken before I knew it, so I replaced it. Normal Switch with nothing of note at all, thank goodness it's inexpensive, nothing to write 60 words on. Normal. View detail
Fits: HONDA HornetCB900F (Hornet), HONDA Hornet900 (Hornet), HONDA CL400, HONDA CBR929RR, HONDA CBR600FX, HONDA CBR600FS, HONDA CBR600FR, HONDA CBR600F4i, HONDA CBR600F, HONDA CBR1100XX, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA CB400 SUPER FOUR (Super FOUR), HONDA XRV750, YAMAHA XJR1300, YAMAHA XJR400RII, HONDA CB1300 SUPER FOUR <ABS>., HONDA CB1300 SUPER FOUR <ABS> (SUPER FOUR), HONDA XLR125R, HONDA XL1000V, HONDA XLR200R
OEMParts same etc
After 20 years, the Brake switch has been extremely malfunctioning and seems to have reached its limits, a few years ago It was repaired in sections, but the contact point also deteriorated I gave up on the repair
This time I tried to change from OEM parts to the same etc. parts for the first time, but there was no problem in installation and operation I think it's almost the same as OEM, it's not obvious from the look of it, and the contents and cases are not different from OEM You can expect the durability of the OEM same
The price is also less expensive than OEM, and the parts are very complicated to disassemble and repair These parts are very useful and helpful in cases where there is a need to have the car inspected and serviced Savior PartsManufacturer
In addition, you can use CokingSeal agent near the case matching surface for moisture-proof measures Treatment
View detail
Fits: HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT), HONDA TACT (TACT)
I think that it is sufficient performance.
Helmet in JOG attached to sports. The reason for replacement is occasionally because Blinker does not work on the way during Blinker operation. Because this Connector shape of Relay is different for this JOG sports, I made Adapter with Flat Terminal. Relay fixing method is Tie Wrap Fixing in Light cowl. Actually, when you activate Blinker, it begins to flicker one TEMPO 13. Other than that it is not complaining. When I check the price of OEM Parts Number, I am surprised
View detail
Fits: HONDA HornetCB900F (Hornet), HONDA Hornet900 (Hornet), HONDA CL400, HONDA CBR929RR, HONDA CBR600FX, HONDA CBR600FS, HONDA CBR600FR, HONDA CBR600F4i, HONDA CBR600F, HONDA CBR1100XX, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA CB400 SUPER FOUR (Super FOUR), HONDA XRV750, YAMAHA XJR1300, YAMAHA XJR400RII, HONDA CB1300 SUPER FOUR <ABS>., HONDA CB1300 SUPER FOUR <ABS> (SUPER FOUR), HONDA XLR125R, HONDA XL1000V, HONDA XLR200R
Almost satisfied
CBR600RR (PC 37 latter term 2005 year) It attached to. I swapped it for 12 years because it became useless.
I thought that the product was the same as it was originally attached. (Maybe you just did not notice the difference)
Behavior also works without problems so it was good.
View detail
Fits: SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI WOLF 125 (Wolf), SUZUKI Volty typeT, SUZUKI Volty Type T (Volty Type T), SUZUKI Volty typeI (VOLTY Type1), SUZUKI Volty typeI, SUZUKI Volty typeC, SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 150 (VECSTAR), SUZUKI Vecstar 125 (VECSTAR), SUZUKI VanVan 200 (VANVAN), SUZUKI VanVaN 200Z (VANVAN), SUZUKI VanVan 200 (VANVAN), SUZUKI TL1000, SUZUKI TL1000, SUZUKI SV400, SUZUKI SV650, SUZUKI SV400
Exactly
I thought that the Front brake's switch is exclusive, but since the shape was similar, I purchased it and installed it Just size. It works without any problem. View detail