Reviews
Fits: MALAGUTI MADISON RS250 (MADISONRS250), GILERA SMT50, MALAGUTI MADISON RS250
Used for PARIOLIInverted Front Fork
I used it to repair a made in Italy motorcycle, which is not included in the list of compatible models, because the size was the same as the OEM parts. I know it is hard to find OEM parts because it is a special size, but please continue to sell them. View detail
Simple Oil leak repair
Used to repair a common fork oil leak on a 390DUKE.:2pc. I have driven about 800 km with no problems. View detail
A LeadFork oil seal
I purchased this product because the oil seal had come loose and I had failed to replace the OEM product myself. This time it worked well and I am satisfied with it and no oil seepage. I would recommend this product to others. View detail
Fits: DUCATI MONSTER 400, DUCATI MONSTER 620, Others , DUCATI MONSTER S2R, DUCATI MONSTER 695
On V-stroke 650.
Oil leakage from the front fork of a VST 650, so it was replaced.
I bought this seal because the OEM oil seal is priced at 1300 yen/piece and the life of this seal is longer than the conventional one. Quantity:1 Set of 2pcs.
At any rate, I just OH'd it, so I don't know about longevity or anything yet, but I hope it will last a long time.
View detail
Fits: HONDA CR125R, HONDA CR250R, YAMAHA YZ250, SUZUKI GSX-R1100, YAMAHA VMAX, YAMAHA YZ125, KAWASAKI ZZR1100 C, KAWASAKI ZZR1100 D, KAWASAKI ZEPHYR1100, HONDA CR250R, YAMAHA YZ250, SUZUKI GSX-R1100, YAMAHA YZ125, KAWASAKI ZZR1100 C, KAWASAKI ZZR1100 D, KAWASAKI ZEPHYR1100 [Zephyr]., YAMAHA YZ125, KAWASAKI ZZR1100 C, KAWASAKI ZZR1100 D, KAWASAKI ZEPHYR1100 [Zephyr].
Front fork oil seal exchange
The cost of OEM parts is 4,840, but this product is 1,800, which is by far the best cost performance.
The replacement was no different than OEM parts, and the grease included was very reasonable.
The movement of the inner tube is also smooth and it has run about 200Km since the replacement.
Durability will be observed in the future.
View detail
A Lead Fork seal AR1001
1 Set for 1 Vehicle's Quantity:2pc. It comes with a set and exclusive grease, and the material is 3 times more sealable and abrasion resistant than normal materials. 。 The OEMs will not last very long.
The Fork Seal Stopper and Fork Boots on top of the Fork Seal Stopper should be replaced at the same time. Fork oil should also be replaced. The OEM oil viscosity is 10W.
View detail
OEM high
An alternative because OEM is too expensive. However, Harley's OEM is too expensive, and there are quite a few OEMs, so you might want to look for one. View detail
Used for Harley 39?Fork
2001 FXDL1450 39?Front fork used for.
Along with the replacement of the inner tube, the oil seal was also renewed.
I have been using this oil seal for about 3 years and the oil never bleeds.
This time it's DLCCoating's Inner, so I'd like to add Impressions in a year or so.
View detail
Fits: KAWASAKI GPZ900R NINJA A7-, YAMAHA FZR1000, SUZUKI GSX-R1100, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA SZR660, HONDA VALKYRIE, YAMAHA FZR1000, KAWASAKI GPZ900R NINJA [Ninja] A7-, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA SZR660, HONDA VALKYRIE [Valkyrie]., KAWASAKI GPZ900R NINJA [Ninja] A7-, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA SZR660, HONDA VALKYRIE [Valkyrie].
I used it for STREET TRIPLE!
I bought this for my stock of STREET TRIPLE when it was troubled, so I replaced it with this one which is easily available at FOR JAPAN MODEL. I thought I could order after the trouble happened from next time because it arrived immediately. View detail
Stock on STREET TRIPLE
Being a Triumph and a United Kingdom Motorcycle, we keep them in stock so that they are ready to go when Fork's Oil Leak Trouble happens. Ally and Seal are lined up in a variety of sizes, which is very useful for the foreign car crowd. View detail
Fits: BMW R1200GS, BMW R1200RT, BMW R1200GS Adventure, Others
I bought it in Cospa
From now on, we will exchange Seal together with Fork oil exchange. Well it is a consumable item so I decided it in Cospa, but from Brand I think that there is no problem. Moreover, I was waiting because I was not in a hurry, but for more than 3 months delivery date, as expected. It will be helpful if you can consider inventory or procurement method of overseas Brand. View detail
I can trust.
It is Repeat..
Oh yeah, so it's not a casually exchangeable part, so just cheap things are not enough for credit and we are using only the proven A Lead.
Silicon grease enclosed with Chan and Package is pleased.
Because I can not feel bodily feeling about use feeling ,,,,,
View detail
A Lead of security!
A Lead's Repeater.
Many cheap ones are sold, but because it is a part that can not be easily replaced, we love A Lead with a proven track record.
Small Silicon grease in a bag (?) I am glad that it is attached (Lol)
View detail
Feel better than OEM seal at OEM
Rubber quality tends to be tightly adhered to the price.
While passing through the Inner Tube, I had a hard time putting Rip tension firmly
Friction seems to move lightly as Small than OEM Product.
View detail
Fits: YAMAHA RZV500, SUZUKI GSX1100S KATANA, YAMAHA XS1100, SUZUKI GSX750S KATANA, YAMAHA XJ900, SUZUKI gsx1100s katana [katana]., SUZUKI GSX750S KATANA [Katana]., YAMAHA RZV500, YAMAHA XJ900, YAMAHA XS1100, SUZUKI gsx1100s katana [katana]., SUZUKI GSX750S KATANA [Katana]., YAMAHA RZV500, YAMAHA XJ900, YAMAHA XS1100
Fit Suzuki Katana 1981 GSX1100S model. Perfect! This seal is same size, same diameter, same thickness as the stock OEM Suzuki parts. Fast EMS delivery.
Fit Suzuki Katana 1981 GSX1100S model. Perfect! This seal is same size, same diameter, same thickness as the stock OEM Suzuki parts. Fast EMS delivery. View detail
Fits: SUZUKI GSX-R750, HONDA VFR800, BMW R100R MYSTIC, HONDA CB750, HONDA CB400 SF, HONDA HORNET600, HONDA HORNET900, SUZUKI GSX-R750, BMW R100R MYSTIC, HONDA CB400 SF, HONDA HORNET600 [Hornet]., HONDA HORNET900 [Hornet]., BMW R100R MYSTIC, HONDA CB400 SF, HONDA HORNET600 [Hornet]., HONDA HORNET900 [Hornet].
Used for V-TWIN MAGNA's Front forkOH.
I used it for Front forkOH of V-TWIN MAGNA. The texture of Rubber is also inferior to OEM, Oil blotting after exchanging etc etc. It moves to Smooth without it. Gold It is also good to be cheaper than OEM. View detail
Seal change
It is better than the one exchanged last time against Outer tube!
Relieved without Oil leakage even after assembly.
I try to run a little, but because there is no bleed,.
View detail
It is OEM Same Product.
About VT last year I felt that the ups and downs of Fork seemed to be intensifying, but while I noticed that it was a little bit blurred, I became miserable and misguided and riding, I just got back home from shopping and put it in the garage A few hours later Oil leaked from Fork and the Fender was covered with Oil.
In this state, the Oil is scattered in the Tire and it is dangerous. As soon as I feel I have to exchange Fork seal and Dust Seal, I bought the same Manufacturer's Fork seal which I used for SR before.
Since Dust Seal is not included, you need to prepare Dust Seal separately, but I felt it was reasonably affordable even though I thought of only Fork seal.
Package is packing at the Level which is necessary at minimum, and extra garbage never increases, yet it felt that it is also easy to open Package so that it is also very good in that aspect.
Quality is same as OEM. , Or even when used before, there were some points Rust on the Inner moving part but there is no such thing as it will be torn and leaked from there, even now even after half a year passed, it can be used without problem.
It takes a lot of time to change the Fork seal so it will be a work hour so that if you are familiar with it, even with two people you have to watch 3 or 4 hours, but Fork seal - After replacing Fork oil, it absorbs and shrinks the shock at the step so that it is not compared with Oil that is coming out or is outdated.
Because it is a part used for Parts that supports the car body and keeping Balance, cheap items are a little ... I think that it's of Level's problem to use it without worry even those who use it safely.
This time SR - Since VT has the same diameter, we used the same ProductNo thing, but there are various Size and there are various Size and conforming cars so when replacing Fork seal or replacing Fork oil, Repeat this Fork seal I think I will purchase it.
There is no disappointing point and durability is also very good so we can recommend it to any way you use it like on-road vehicles such as off-road vehicles and American on-road vehicles, town-riding vehicles, commuter vehicles, vehicles for circuits etc. It is seal..
View detail
Since brand-name parts did not come out for 1974 models, and the Alito Fork seal was the Size exactly, it used.A price is cheap, and even the Silicon grease is attached and it is inexpensive.Although exchanged about twice, it is quality and recommended.
Since brand-name parts did not come out for 1974 models, and the Alito Fork seal was the Size exactly, it used.A price is cheap, and even the Silicon grease is attached and it is inexpensive.Although exchanged about twice, it is quality and recommended. View detail
Fits: KAWASAKI GPZ900R NINJA A7-, YAMAHA FZR1000, SUZUKI GSX-R1100, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA SZR660, HONDA VALKYRIE, YAMAHA FZR1000, KAWASAKI GPZ900R NINJA [Ninja] A7-, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA SZR660, HONDA VALKYRIE [Valkyrie]., KAWASAKI GPZ900R NINJA [Ninja] A7-, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA SZR660, HONDA VALKYRIE [Valkyrie].
"Fork seal of FJ1200 was exchanged. A price is cheap anyway. This fork seal is 1680 yen at two pieces though a genuine one is 1208 yen, and it is 700 yen cheaper. If cheap so far, there may be a problem and I checked Alito's site in quality. Seemingly, un
"Fork seal of FJ1200 was exchanged. A price is cheap anyway. This fork seal is 1680 yen at two pieces though a genuine one is 1208 yen, and it is 700 yen cheaper. If cheap so far, there may be a problem and I checked Alito's site in quality. Seemingly, unlike a genuine product, the material of a seal of adhesion with an inner pipe itself is quite good. Invasion of the dust from the outside or oil leakage or may be suppressed considerably, as adhesion is good. Since seal grease for exclusive use is also packed up, it is quite inexpensive. For the moment, I don't have any problem after exchange, and I can satisfy it. A price is also cheap, and exclusive grease is attached with this price, so it may not need to buy a genuine one." View detail