Reviews
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Well-designed Rear suspension will be protected from dirt.
It seems to protect Rear suspension from dirt with good design.
Because of the tie band fixation, some adjustment may be possible when wearing.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Material:The twill weave pattern peculiar to Carbon products is very beautiful! NEXRAY is indeed the best.
The twill weave pattern is very beautiful Coating. Moreover, it is a NEXRAY product. The product is highly accurate, and there was no distortion or modification of the screw installation position like other companies. View detail
NEXRAY CARBON DRYLong tail
I bought the Fender Eliminator because it was in stock at Webig and I had extra income, so I wanted to reduce the sludge to Seat even if there was a Carrier when the road surface was wet.
I think that many of you have installed long tails, but I chose this one because I thought it could be used together with EnduranceCarrier.
I was worried about interference and was nervous about going to Yahoo!
When I put it on, the parenthesis is quite good.
The wind-up is still unconfirmed, but it looks better now that it has extended back to half of Carrier.
View detail
Fits: HONDA CB1300 SBSP, HONDA CB1300 SF, HONDA CB1300 SB, HONDA CB1300 SFSP
Product
Too badly shaped, too expensive and too disappointing, Chain rubs on Chain Cover and is unusable, Rear tire is so badly shaped that it seems to roll in, View detail
Fits: SUZUKI HAYABUSA, SUZUKI GSX1300R, SUZUKI GSX1300R
It looks great!
As the Title says, it looks great. It doesn't stand out, but when you notice it, you can't help but notice it. "Oh, great." It is even more so because NORMAL is a cheap plastic. View detail
Way to go!
It took about 4 hours for a beginner installation.
I'm happy with the shuffling.
Not recommended for those who want to make it look like the old KATANA.
I'm giving it 3 stars for durability because I haven't run it much yet.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
it's good
I am driving a zx14r and the product is very good. Obviously, Weba deals with good products. Thank you so much for the fast delivery and friendly advice. I buy it all the time, but I'm happy every time I buy it. There are other things, so I'm always surfing. ------------------------------------------------------------ -------- I'm riding a ZX14R car and the product is so good. Definitely Wiba handles good products. Thank you very much for your fast delivery and friendly consultation. I always buy it, but I am happy every time I buy it. There are many other things, so I'm always writing. Powered by Google Translator View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Dry carbon!
This is the first time I have installed a product made of Dry Carbon, and it is much stronger than Wet Carbon.
It is also a very high quality and satisfying product. The price is also very expensive.
Is it about the same as OEM in terms of performance?
View detail
Fits: HONDA CB1300 SFSP, HONDA CB1300 SF, HONDA CB1300 SB, HONDA CB1300 SBSP
Very good☆
I installed this on a CB1300SB SPMODEL 2018.
I was looking for a Mudguard for the suspension (especially the rear suspension) and I like Carbon, so I found this one.
There was no Review, so I had to sacrifice myself. (Lol)
I got the Semi-grossType and it's like a matte finish, very tight on the suspension!
If I remember how effective it is, I'd like to REVIEW it again.
The manual says to remove the Rear suspension on the Left, but I was able to install it normally without removing it.
To install, simply remove the two bolts from the Left Side Chain case, replace it with the Chain case, tighten the OEM bolts, and then secure with the three Tie Wraps provided.
It took about 10 minutes.
Neck on the pricey side, but I have no complaints about the quality.
If you are on a budget, buy it.
The only thing that bothered me was the length of the included Tie Wrap (300mm) for fixing.
I try not to involve unnecessary Cable, and it is like Limit somehow.
If possible, I'd like to add something longer.
View detail
Fits: Others
Stylish License Plate Holder
I like Design the most among the license plate holders on the market.
I just use Dry carbon but it's thin and not strong enough.
View detail
as one would expect
Depending on your taste, the quality & Design is nice.
The NEXRAY itself is well packaged, so I'm happy with the Large variant.
The photos of Semi-gross and Smoked black are mixed, so you need to make sure you get the right one.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Dry carbon reflection and threatening lightness w
[How is it used?
In Use. About 4 years have passed since it was installed.
Was the one you received as per Image?
I chose the Semi-gross and it has a more textured look than the Image.
Was the installation difficult?
There is a lot of space even with the STAND upright, so it was easier to work than with the Jack.
It is fitting, but the product of this Brand as usual has high accuracy, and the place where there is no processing such as expanding the mounting hole or bending the body is excellent. Therefore, it was not troubled by installation.
How was your experience with it?
If you want to run in the rain in NORMAL condition, the inside of the Fender will be sludge and the suspension will be dirty. After I put this on, it is much better and the area that becomes sludge is only around the back end of the Fender and the back of Number.
[Included Parts:were they on?
Brand NameSticker
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Point and hang of installation:I forgot to take a picture, but I put a 5mm Epto Seal on the Rear Fender as a buffer material to protect the surface of the part that contacts the Swing Arm.
View detail
Race ish feeling
The New ModelKATANA which had a feeling of uncomfortableness became a little race ish handsome man. the place to take ETC etc. was troubled, but it was solved at a stretch. It is very Recommendation. View detail
Design unencumbered by predecessors
New ModelKATANAParts has few reviews overall, but
I would like to review it so that it may be helpful to my late brothers and sisters.
This is a product that can extend the controversial short tail and change the tail lamp design.
Installation can be done without any problem if you follow the instruction manual included.
For me, it was 2-3 hours of actual work.
If you're familiar with it, it's possible within an hour.
Perhaps throwing it in the Shop would not be so expensive.
Tools used
・Phillips Screwdriver
・Hexagonal Wrench
・Glasses Wrench
Socket wrench+Extension bar← is required.
Socket wrench is a quantity:Set is recommended.
It is the impression that I installed it, but it increases the sense of unity because the line from the front does not break at the tail but extends as it is.
Because the Tail lamp which was conscious of the previous generation changes to the one of Small Type, the Design changes to Large width for better or worse.
Personally, I am satisfied with Racer flavored Small TypeLamp which is very Sporty.
Active's parts are not to image the previous generation, but to make the modern KATANA more advanced, so by combining with other Active products, I think the design will be more unified.
The price is high because it is only Dry carbon, but I think that the appearance and the sense of ownership are worth the price.
View detail
Quality is the best
Because we installed Fender eliminator, OEMLicense Holder can not be used.
We chose this to find lightweight Simple ones.
Including Reflector weighs only 68 g. It is very light.
Because there is folding around, the rigidity is also high.
I am satisfied..
View detail
Satisfaction with both shape and quality is high.
【What made you decide the purchase?】
With Reflector's Carbon Plate, the best in both quality and shape.
【How was it actually used?】
The angle does not rise too much too much, it does not go too far down, it is just good, Reflector's Largeness is Compact and it is an inverted triangle Plate shape according to it is Stylish.
In addition, since the surroundings have Rib, the strength is also high, there is also no vibrating by vibrations at all.
【Was it difficult to install? (Hard parts case)】
BoltQuantity : Because it is only 2pc, everyone is easy to install!
【Please tell me the point of installation and hang (in the case of Hard parts)】
To say it dare to install the License Plate firmly into the Center.
[Is there anything I was disappointed about?]
Not at all.
【Hope for Manufacturer - Please let me know if you have any improvement points]
If you lower the price a little more, can you sell more?
【Have you compared items?】
Force-Design False Design : Carbon License Base
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z1000 (water-cooled)
I think the review is good enough personally.
I used to ride the zzr 1400 before, but at that time NEXRA CARBON DRY was wearing back and forth. I also liked the shape very much. I switched to Ninja 1000 of 17 years this time in June and compared the Fender of another company Manufacturer, but compared it, I made a NERAY similar to the arrowhead still. Since the year of the mounted vehicle is a representation for H16 year to date, I purchased it because it was OK as a result of asking WEBIKE for installation confirmation. It does not matter if you compare it with NORMAL even after installation. Arrow cabon is good. View detail
Fits: HONDA CB1300 SB, HONDA CB1300 SF, HONDA CB1300 ST
How to change Image
I tried comparing various Carbon fender, but I think that it is a very good product with both texture. Ba LePera There is no feeling, making is solid, but the accuracy of the mounting hole was not good, but I think the whole Balance is good. But I think that it is better to lower a little more because the price is high. View detail
Fender effect UP than STD Shape
NORMAL's R1 Fender is small enough to say this, but it is much bigger than that, you can considerably reduce hitting a Rear suspension by winding a Small stone etc, and the function as Fender is I'm satisfied with the rise to the Large width.
The surface finish and the weave of Carbon are neat and the appearance satisfaction after installation is also high.
However, although it is common to these exterior parts, since the mounting holes were slightly misaligned, it became mounting while correcting with File.
View detail
Fits: SUZUKI HAYABUSA, SUZUKI GSX1300R, SUZUKI GSX1300R
CARBON DRYCarbon Dry Rear Fen
Production to order I guess it will not work, but it takes delivery anyway. Installation is easy, but product accuracy was not satisfactory. It is a pity that I am satisfied with buying another NEXRAY product. View detail