Reviews
Instead of Tie Wrap
I used to check the amount of stroke by wrapping Tie Wrap around the Inner Tube, but I decided to use this product. It is possible to install without removing the Fork, but it took some time to attach the Spring which holds the Body in place. It is a bit pricey, but I recommend it because it looks good, parenthesis is good, and it is functional. View detail
It's a good product but I think it's a bit expensive….
[How is it used?
ZX-6R Φ41. Tie Wrap would be fine but it looks like that.
Was the installation difficult?
Installation is easy, but requires a bit of hang. If you install it by expanding the ring, it will be irreversibly deformed.
The spring is designed as a screw, so it is pulled with a slight twist.
How was your experience with it?
This Ideas product looks good and can be installed without disassembling the front fork, but it is too expensive.
If you are not picky, Tie Wrap is sufficient.
View detail
Tie Wrap is tacky.
I think Stroke sensor tends to be done with Tie Wrap, but it doesn't work well and is tacky.
This Stroke sensor is used for Material:It is Plastic, so it moves well and is easy to install.
It is not a Cool translation, but it eliminates the tackiness.
View detail
Good
I've used the Universal one and it's universal in every one there. View detail
The price is cheap
I installed it on my GSX-8S with no problems. View detail
Cool!
I had the O-ring installed at the time of FFork OH at a certain place and had no problem at all with it as it was, but I bought it because Parenthesis is good.
The instruction manual was so thin that I couldn't read it at all, but the installation was very easy. At first I tried to connect them after inserting them into the groove, but I had to pull a lot to do so, which seemed a bit unreasonable.
I'm happy with Large, but when I put FFender together, you have to look through it to see it at all.
View detail
For Sports driving
I bought it partly for self-satisfaction and partly to see how much the front suspension moved when running Sports and Winding. 。
Installation is simple, but I thought a little ingenuity was needed.
For CBR600RR, MODEL that uses Inverted Front Fork (PC37 late or PC40) for a 41mm one.
View detail
Replace aging Radiator hose
The old OEM Radiator hose was replaced along with the installation of NITRO RACING's Radiator.
It is flexible and easy to insert into Pipe.
I used to use the same manufacturer's product on my GSX1300R HAYABUSA, and it worked without any problems, so I think it is durable and Large sturdy.
I chose Black because I didn't want it to stand out.
View detail
The vibe is Racemascene!
What was the deciding factor in your decision to purchase, install, and how do you feel about using it?
Recently, I was wondering what I should install next on my 6R. When I was searching the Net, I found "Nex Performance:Stroke sensor" is a necessity for suspension setting, but it was not possible to install it without overhaul of the front fork. However, Nex Performance:Stroke sensor is designed for easy installation. However, care must be taken not to force open the sensor ring or pull too hard on the spring, which may cause the spring to stretch. In this case, it took about 5 minutes to complete the work, although it required some hang time to screw the spring in. I am looking forward to checking the 6RFront forkStroke condition after driving on the street, winding, and at high speeds. In case you are wondering, the 2021 ZX-6R was 41Φ.
View detail
Good
Required when using Maintenance Stand.
When you apply STAND and step on it with your foot, the Motorcycle will quickly rise.
Anodized treated for accent and beautiful appearance.
View detail
Race ish casually
This ring measures the amount of stroke of the front fork.
So far I have been wrapping Tie Wrap around the Inner Tube.
Tie Wrap would have been perfectly fine, but we decided that a dedicated product would look better anyway.
The white ring has a cutout that opens into an inner tube.
A little hang is required to wrap the spring around the ring.
Be careful not to wrap the Spring too tightly or it will stretch.
It looks good and is kind of race ish, which is good.
This is also recommended for those who prefer these kinds of parts that give a casual race ish feeling.
View detail
Texture, color, function, no problem.
I bought this for the peace of mind of Maintenance and to protect my Swing Arm in case of a fall.
I thought I could have used Silver, but from my experience, Silver accumulates dull stains, so I chose Titanium this time.
No problem with practicality and function.
View detail
Since there is no OEM
I already bought it because OEM Parts are not available.
I'm sure the performance is unquestionable.
If there was an OEM, I bought the OEM.
I dared to buy an inconspicuous black one.
The surface is not so slippery that you can't wipe it even if you wanted to.
I was able to install it with no problem at all in terms of dimensions.
View detail
Dare to choose Black
I purposely chose black so that it would not stand out.
Bright colors. We switched. It is okay to Appeal to the
I was able to install it without any problems in terms of shape and length.
View detail
Parenthesis is good but the price is a bit expensive.
Set the Stroke amount of Front fork to
Easy to understand to check.
You can install the Spring and Sensor ring separately.
Install the sensor ring by spreading it up and down.
Quantity:Pair (for Left and Right) Scauperoon and down to one machine after installation when spread out to
It falls off.
In that case, remove it and round the Ring a little to make the inner diameter
I'll make it small.
Be careful not to overdo it or it may break.
The tip of the spring is a convex and concave screw type.
Picking up the endsQuantity:Pair (for Left and Right) Pull it as far as you can reach the
If you pull too hard, it will stretch and the Band will not work.
Note that this will not work.
Twist slightly counterclockwise when pulling, and at the point where the bumps meet.
If you turn it clockwise, it will match and form a circle.
Finally, we put Spring into the groove of Sensor.
Quantity:I feel that 1pc. is rather expensive.
I wish it was a little cheaper.
View detail
I think the cost performance is good
[How is it used?
It is mounted on the MT-07 with an external ChainAdjuster that allows you to add Stand Hook.
The price is lower than other companies and it is solid.
Was the one you received as per Image?
The color was a little different from the picture, it was a dull Blue color.
The color of the Screen and the real thing are different, but in addition, the Anodized is unavoidable because there is Rose variation of the color.
Was the installation difficult?
Just install with the Hexagonal Wrench, it's that easy.
How was your experience with it?
Rear stand can be hung properly.
It's convenient
View detail
It's small, but it has presence.
It's not functional because it doesn't have STAND, but Custom feeling makes it look good with presence even though it's a SmallParts.Anodized paint is in good condition and it's overpriced. View detail
It's expensive.
It may be necessary for the setting for the serious people.
For me, as an amateur, it's a toy that makes me smile when I see the amount of Stroke after driving on mountain roads.
It's good for a little self-indulgence.
View detail
RearStand Hook Bolt
If the Bolt part was Plating silver, it might have looked better. View detail
I don't have a STAND.
It is installed as one point of Custom. It is installed on the ZrX1200 DAEG without any interference with the Swing Arm. It was hard to choose the color, but I decided to use the same color as the body. View detail