Reviews
Fits: その他 , HONDA DIO FIT, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, YAMAHA MATE50, YAMAHA YV50 Z II, YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA Remote controller jog, SUZUKI ZZ
Standard replacement lamp
About quality and texture
Good quality lamp to replace the original lamp in the headlight, made exactly the same as the original, absolutely the same shape and glass bulb, 40/40W correspond to reality, after the replacement, there was no lack of light in the dark, and since the lamp is new it illuminates even better, now you do not need to buy an original replacement lamp
About the feeling of use
Installation of the lamp is very simple and does not take much time, using this lamp at night gives confidence when driving, the light is very bright and sufficient for driving, the low beam illuminates the road surface in front of the wheel, and the high beam shines a little further and illuminates the road in the distance, the brightness of the lamp corresponds to the declared characteristics
Products to buy together
Nothing extra to buy
Difficulty of installation
Easiest installation to replace an old damaged lamp in a standard place, full compatibility and perfect fit
Cost performance and comparison with other products
Low price and high quality, it is still cheaper than the original lamp, but it has the same performance, or maybe a little better.
About shipping and packaging
Simple soft packaging, which will not protect the lamp during transport, but everything was additionally packaged by Webike, so the product arrived without damage
Any concerns, cautions, or advice when purchasing
Pay attention to the required power of your standard lamp and select replacements accordingly
View detail
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
Great LED low beam
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
Great LED low beam
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
Excellent bright LED lamp for scooter
Fits: HONDA CBX750F, HONDA PS250, HONDA VFR400K/Z, KYMCO B&W250, KYMCO CARO2, KYMCO KCR125, KYMCO SUPER9 50, KYMCO VITALITY 50, その他 , HONDA Rebel (-1999), YAMAHA VOX, YAMAHA FZR750, SYM Wolf Classic, SUZUKI RH250, SUZUKI RA125, MALAGUTI PassWord250, PIAGGIO ICE50, HONDA SPACY125, HONDA CS250SE, HONDA XLR250
Light intensity is low.
Used for FZ750. The light intensity is that of a typical Halogen bulb. Level is not so bright to be honest.
However, since the car Both Sides is old (Harness has not been replaced yet), we do not know what really happened.
This may also be a problem with the car Both Sides, but the Filament breaks periodically and the life span is not very long.
View detail
Yellow and nice!
The yellow color is so strong that even with LightOff, the inside of the housing appears yellowish. However, it is not too dark and is practical enough.
This time I had to repeat the process due to a bulb breakage, but I think it is enough since it lasted for 2 years and 15,000 kilometers.
OEMValve also ran out at 15,000 km.
View detail
Fits: その他 , HONDA DIO FIT, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, YAMAHA MATE50, YAMAHA YV50 Z II, YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA Remote controller jog, SUZUKI ZZ
Moderately bright and good
Installed on Addressv125.
I hadn't replaced it for a while, so I replaced it before the balls ran out.
I really wanted to use LEDs, but after much consideration, I decided to go with Halogen, which is the easiest to install.
The brightness is not as bright as HIDs, but Halogen still looks good on old motorcycles! I think.
It is also easy to install, so it is a recommendation to replace it for now.
I've had it installed for about a month now and no problems.
View detail
Fits: Others
Satisfied
It was difficult to find LEDs with integrated License Plate Light, and I hesitated because of the high price of this one (in my case, Quantity:2pc. (Set required) and safety safety parts, so I took the plunge and went with this one.
I was satisfied with the brightness, etc., but I had a hard time choosing from several Types when I purchased the product.
It would be great if there was a list of car models, years, etc., since they are so expensive and it would be a big problem if we make a mistake.
View detail
For Meter Bulb
I purchased this for my 4LMONKEY Meter Bulb.
If you like the old-fashioned way, this is the way to go, as it is not as flashy and bright as LEDs.
View detail
Flashing Valve
I used it on a Blinker Valve, but it's not painted, it's a Rubber type Film? So it does not blink nicely. View detail
By blinker clear lens-ization of VTR250, since the front was exchanged for the orange ball, an one-piece pack was purchased in reserve.
By blinker clear lens-ization of VTR250, since the front was exchanged for the orange ball, an one-piece pack was purchased in reserve. View detail
By blinker clear lens-ization of VTR250, although exchanged for the orange ball, the thing of an one-piece pack was purchased in reserve in the case of the ball piece of RIA.
By blinker clear lens-ization of VTR250, although exchanged for the orange ball, the thing of an one-piece pack was purchased in reserve in the case of the ball piece of RIA. View detail
Fits: SUZUKI LETS5G, SUZUKI LETS5, SUZUKI LETS4Basket, SUZUKI LETSBasket, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, HONDA PCX150, HONDA PCX, HONDA LEAD110EX, HONDA LEAD110
Not available for CUB110 JA07
I bought it with the intention of using it for my CUB110 JA07.
At the time of purchase, it was included in the compatible car models.
In the Package sent to you
Not available for CUB110 JA07
and Seal was posted.
The high beam and low beam simultaneous light functions are very attractive.
Too bad!
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
I'm sure it's my Motorcycle, but it flickers a lot when I put it on as it is.
It flickered quite a bit. My Motorcycle does not have a Battery, so that may be the reason. Naturally, I don't recommend using LEDs in a battery reply. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
XRMOTARD requires processing.
[How is it used?
Commuter Vehicle.
Was the one you received as per Image?
Heat Radiation Fin is long and the depth of the fin is too long, which is a disappointment because it hits the light lens hard when it is supposed to be guaranteed to fit the webig!
Was the installation difficult?
The tip of the LED Light Heat Radiation Fin was a little too close to the Lens as it was, so a spacer was made and the tip of the Heat Radiation Fin was modified to fit.
How was your experience with it?
The high beam is a simultaneous light, so it illuminates the front of the lamp as well as the front of the lamp. The Meter panel and Neutral lamp are also brighter due to lower power consumption.
[Included Parts:were they on?
There is not
[Was there anything that disappointed you?
Not so much Manufacturer, but rather Webeig's conformity check is not good enough!
Other items that would be helpful
XRMOTARD is guaranteed to fit, but in the end, the User will need to use Spaceretc.
If the shape of the tip of the Heat Radiation Fin were made shorter and more radial, etc., the Heat Radiation Fin would not be visible from the front and the number of compatible cars would increase. I don't know how long it will last, but overall, I think it's almost there.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Wish it was a little brighter.
Reasonable brightness for a moped.
PlusOnHigh beam feels subtle and dark underfoot and in the distance.
Low beam light distribution was good.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Replaced here because it was dark.
The OEM was Halogen, so of course it was dark, but we replaced it with this one.
I don't have any experience on the road at night yet, but I'm hoping for the best there. (Lol)
View detail
Fits: HONDA Super Cub 110, SUZUKI Let's 5, SUZUKI Let's 4, HONDA Lead 50, SUZUKI Address V50 (4-stroke), HONDA Lead 110 (EX), SUZUKI Let's 5, HONDA PCX125, HONDA PCX150, HONDA Lead EX, HONDA Lead 110 (EX), SUZUKI Let's 5, HONDA PCX125, HONDA PCX150, HONDA Lead EX
Almost OEM!
PCX is always on, so I never noticed it during the day, but at night I noticed that the light was somehow dim, and when I checked it, I found that it was out of Valve.
It was a little bit difficult to replace the Halogen bulb in PCX, but I was able to do it without removing the cowl.
Valve brightness is not much different from the OEM Product.
View detail
No problem and safe. Just be very careful about the angle and shape of the mouth Gold.
For the Tail lamp, we avoided LEDs so that the power generated would be used properly in combination with the power consumed.
I hear that it is not good to have too much surplus electricity because once electricity is generated, it can only be converted into heat, etc. at the Regulator.
The Headlight is always on and off and I thought it would not be affected by the LED, but the Tail is always on, so I left the White hot bulbs on.
Made by Pine Stripe, no question about it...White heat bulbs are becoming a component that I'm thankful they still manufacture.
We kept one as a spare just in case.
View detail
Fits: その他
A little expensive.
There is almost no voltage drop even when Brake is applied while the car is stopped to charge the phone and use the Grip heater. The same situation with OEM bulbs was a few V drop, so the effect is very Large. The brightness is also sufficient.
It is a little expensive, so I give it ▲1 star.
Oh, and check the model number carefully when you order!
View detail