Reviews
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
The LED light bulb brightness and projection angle
I bought two M&H Matsushima led headlight bulbs for my 2014 HONDA MSX125 and got them installed. The brightness is less than that of OEM bulb. Horizontal projection angle is not wide enough, so I got back to the OEM bulb. Sorry. I do not recommend this bulb and gives two stars for the overall rating. View detail
Fits: SUZUKI GEMMA 125, SUZUKI TS200R, SUZUKI TS125, SUZUKI DF200E, SUZUKI GS125E, SUZUKI STREET MAGIC 110, SUZUKI TS50 HUSTLER, SUZUKI STREET MAGICS, SUZUKI STREET MAGIC, KAWASAKI Z250FT, KAWASAKI KL250R, KAWASAKI KLR250, KAWASAKI KMX200, KAWASAKI Z200, HONDA XRBAJA, KAWASAKI KMX125, HONDA REBEL, HONDA XL250R, HONDA XLR250R, HONDA FTR250
DR250S requires modification (rmx250 too?)
I found a ph8 ledValve from Pine Stripe and bought it for my DR250s.
I was wondering if I could just snap it on since I saw the same Headlight rmx in the "Compatible Car Models" column, but the product length is too long and the Valve does not go all the way into the back. It seems that I have to cut it down quite a bit. (I thought I could just pop it on, but it's too long and the valve won't go all the way in.)
I wish the ph-8Valve had been designed to be a little more compact since it is often used in off-road vehicles…
View detail
Fits: SUZUKI LETS5G, SUZUKI LETS5, SUZUKI LETS4Basket, SUZUKI LETSBasket, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, HONDA PCX150, HONDA PCX, HONDA LEAD110EX, HONDA LEAD110
Not available for CUB110 JA07
I bought it with the intention of using it for my CUB110 JA07.
At the time of purchase, it was included in the compatible car models.
In the Package sent to you
Not available for CUB110 JA07
and Seal was posted.
The high beam and low beam simultaneous light functions are very attractive.
Too bad!
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
XRMOTARD requires processing.
[How is it used?
Commuter Vehicle.
Was the one you received as per Image?
Heat Radiation Fin is long and the depth of the fin is too long, which is a disappointment because it hits the light lens hard when it is supposed to be guaranteed to fit the webig!
Was the installation difficult?
The tip of the LED Light Heat Radiation Fin was a little too close to the Lens as it was, so a spacer was made and the tip of the Heat Radiation Fin was modified to fit.
How was your experience with it?
The high beam is a simultaneous light, so it illuminates the front of the lamp as well as the front of the lamp. The Meter panel and Neutral lamp are also brighter due to lower power consumption.
[Included Parts:were they on?
There is not
[Was there anything that disappointed you?
Not so much Manufacturer, but rather Webeig's conformity check is not good enough!
Other items that would be helpful
XRMOTARD is guaranteed to fit, but in the end, the User will need to use Spaceretc.
If the shape of the tip of the Heat Radiation Fin were made shorter and more radial, etc., the Heat Radiation Fin would not be visible from the front and the number of compatible cars would increase. I don't know how long it will last, but overall, I think it's almost there.
View detail
Fits: HONDA Super Cub 110, SUZUKI Let's 5, SUZUKI Let's 4, HONDA Lead 50, SUZUKI Address V50 (4-stroke), HONDA Lead 110 (EX), SUZUKI Let's 5, HONDA PCX125, HONDA PCX150, HONDA Lead EX, HONDA Lead 110 (EX), SUZUKI Let's 5, HONDA PCX125, HONDA PCX150, HONDA Lead EX
It's the same as OEM ball. Installed in JA07
The headlight of JA07 is a multi-reflector with a round and large reflector, but the good side is not utilized at all, and I was fed up with the darkness that was inferior to the old iron CUB. (By the way, the successor JA10 has HS1=H4 Valve and is quite bright even if the reflector is square.
Then, I introduced SPHERE LED Headlight NEOL HS5 type which cost almost 10,000 yen, but I encountered Trouble that the amount of light of LowBeam was reduced by half twice in succession before I drove even 1,000km. (It was good that it was much brighter than normal)
I bought this product because I was tired of it and I only drive in the city and I wanted to change back to Halogen bulbs.
M&H's B2 was a fan that I always replaced on my Large Scooter, but compared to the old PH7, the newer HS1 and 5 designs were brighter than the OEM Halogen. If the life span is shorter than OEM, I think there is no need to choose it.
View detail
Fits: HONDA CBX750F, HONDA PS250, HONDA VFR400K/Z, KYMCO B&W250, KYMCO CARO2, KYMCO KCR125, KYMCO SUPER9 50, KYMCO VITALITY 50, その他 , HONDA Rebel (-1999), YAMAHA VOX, YAMAHA FZR750, SYM Wolf Classic, SUZUKI RH250, SUZUKI RA125, MALAGUTI PassWord250, PIAGGIO ICE50, HONDA SPACY125, HONDA CS250SE, HONDA XLR250
Improved light intensity, but shorter life
The brightness will be improved, but the Grip heater in Handlebar will not work because the amount of electricity used will increase.
In addition, the period of use becomes short after about one year, and there is not much merit for the purchase price.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
A bit disappointing ...
Expecting to replace it with the White heatball, the brightness itself did not change.
Because the contact is the reverse of the White heatball, Switch between Hi and Lo also switched the switch.
It can be used as a spinning ball, but it has no cost effectiveness at all.
View detail
why - -
Nondefective has returned due to machining failure. Package and appearance were the same as the other one, but it turned out to be clear when energized
Yellow color appears Red. I thought that it was chaotic due to the mixture of the initial product, what a coincidence, I went over.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
disappointing
It is not so bright as I thought.
It is not very bright as the price goes.
I will use it for the time being, but it is the same feeling as OEM
It's fine because it's white.
I feel regrettable.
View detail
The Position light of the beef fat light was turned off, and since there was no Yellow Bulb of a Stanley, it purchased here. the Yellow -- rather than -- touch near the color scheme of a NORMAL is better -- ます.
The Position light of the beef fat light was turned off, and since there was no Yellow Bulb of a Stanley, it purchased here.
the
Yellow -- rather than -- touch near the color scheme of a NORMAL is better -- ます.
View detail