Reviews
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
XRMOTARD requires processing.
[How is it used?
Commuter Vehicle.
Was the one you received as per Image?
Heat Radiation Fin is long and the depth of the fin is too long, which is a disappointment because it hits the light lens hard when it is supposed to be guaranteed to fit the webig!
Was the installation difficult?
The tip of the LED Light Heat Radiation Fin was a little too close to the Lens as it was, so a spacer was made and the tip of the Heat Radiation Fin was modified to fit.
How was your experience with it?
The high beam is a simultaneous light, so it illuminates the front of the lamp as well as the front of the lamp. The Meter panel and Neutral lamp are also brighter due to lower power consumption.
[Included Parts:were they on?
There is not
[Was there anything that disappointed you?
Not so much Manufacturer, but rather Webeig's conformity check is not good enough!
Other items that would be helpful
XRMOTARD is guaranteed to fit, but in the end, the User will need to use Spaceretc.
If the shape of the tip of the Heat Radiation Fin were made shorter and more radial, etc., the Heat Radiation Fin would not be visible from the front and the number of compatible cars would increase. I don't know how long it will last, but overall, I think it's almost there.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Wish it was a little brighter.
Reasonable brightness for a moped.
PlusOnHigh beam feels subtle and dark underfoot and in the distance.
Low beam light distribution was good.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Replaced here because it was dark.
The OEM was Halogen, so of course it was dark, but we replaced it with this one.
I don't have any experience on the road at night yet, but I'm hoping for the best there. (Lol)
View detail
Fits: HONDA Super Cub 110, SUZUKI Let's 5, SUZUKI Let's 4, HONDA Lead 50, SUZUKI Address V50 (4-stroke), HONDA Lead 110 (EX), SUZUKI Let's 5, HONDA PCX125, HONDA PCX150, HONDA Lead EX, HONDA Lead 110 (EX), SUZUKI Let's 5, HONDA PCX125, HONDA PCX150, HONDA Lead EX
Almost OEM!
PCX is always on, so I never noticed it during the day, but at night I noticed that the light was somehow dim, and when I checked it, I found that it was out of Valve.
It was a little bit difficult to replace the Halogen bulb in PCX, but I was able to do it without removing the cowl.
Valve brightness is not much different from the OEM Product.
View detail
![Incandescent Light Bulb [Head Bulb] T19 P15D25-1](https://global.webike-cdn.net/photo/impression/38/38512a45db2e402bf3800e10f5e6035dL.jpg)
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Used for NSR50
Headlight went out and was replaced.
I don't know how bright it is because I basically don't ride at night.
Replacement was easy.
View detail
No problem and safe. Just be very careful about the angle and shape of the mouth Gold.
For the Tail lamp, we avoided LEDs so that the power generated would be used properly in combination with the power consumed.
I hear that it is not good to have too much surplus electricity because once electricity is generated, it can only be converted into heat, etc. at the Regulator.
The Headlight is always on and off and I thought it would not be affected by the LED, but the Tail is always on, so I left the White hot bulbs on.
Made by Pine Stripe, no question about it...White heat bulbs are becoming a component that I'm thankful they still manufacture.
We kept one as a spare just in case.
View detail
Fits: その他
It's working all the time.
I bought it about 6 years ago and I have been using it for a long time and it still hasn't run out. I am very satisfied with the brightness of the light. View detail
It's been 6 years and it's working fine.
I wanted to change the Meter Bulb of my CB400SB to LED because it was dark 6 years ago and I found this product. I have been using this product for 6 years since I bought it and it has been working well without any dimming of the brightness. Some people may think that the price per unit is expensive, but I think it is cheap if it can be used semi-permanently. Now I can do most of the maintenance of my motor cycle without leaving it to a motor cycle shop, but it was the first time for me to tinker with my motor cycle when I had no knowledge of anything. View detail
Fits: その他
A little expensive.
There is almost no voltage drop even when Brake is applied while the car is stopped to charge the phone and use the Grip heater. The same situation with OEM bulbs was a few V drop, so the effect is very Large. The brightness is also sufficient.
It is a little expensive, so I give it ▲1 star.
Oh, and check the model number carefully when you order!
View detail
Visibility has been increased and the atmosphere has been improved.
Replacement is four upper and lower Cowl's and Meter's NutQuantity:It was easy to replace by removing the 2pcs.
Red LEDs make the letters stand out and look cool.
View detail
It's just so polar yellow!
Used on BALIUS1. I don't know about the life of the car because it has been used for about 3,000 km. (Other products) is so durable that I've forgotten when I changed it.
Anyway, it's yellow! If you are looking for a deep yellow color for your old car, this is the best recommendation. The unit of color temperature is k (Kelvin) The higher the color, the yellower the color, and the lower the color, the whiter the color, but this product is the only one that claims a value of 2300k.
However, the darker the yellow color is, the worse the visibility becomes. The darker the color, the worse the visibility.
But even with that, it's still worth it for the bright yellow color and parenthesis!
From my experience, I have the impression that the yellow color becomes darker in small lights such as Off cars and Replica than in large threshold round eyes of NAKED.
I have attached a picture, but it may not be helpful because it looks more Yellow in real life.
View detail
KSR80 IndicatorLamp replacement
It is a KS80 MeterLamp, but the OEM Lamp was not good and the visibility of the Meter at night was very poor and unsatisfactory.
I bought and replaced the LED Position Indicator Lamp that was in the corner of the car at the home center, but although I could see some of the light, it was not satisfactory. It was not satisfactory.
At such a time, when I was browsing through Webig's impressions, I came to the conclusion that M&H Mats Stripe's ultra-brightness LED was good, so I decided to purchase it this time. In the product description, it says to use the same color LED as the meter, so I chose the same Red color as the KSR color.
When I replaced the panel, the red color made the panel look suspicious, but I felt that the visibility was improved.
In order to make this comparison, I covered the camera with a black cloth during the daytime, so it may look a little different at night, so please refer to other people's impressions.
View detail
Fits: Others
Easy
I bought this product for the pilot lamp of my Takekawa SquareLCDMeter, which I installed on my XR100R road spec. I also bought and installed the same product on my XLR80R when I changed the Pilot lamp and Blinker Valve to LED before.
The only thing you need to do is to interrupt the wiring and take out the earth, so if you have enough skill to do the Bullet Terminal at Electric Works Pliers, you can install it without much effort.
I always buy them when I need them because they save me the time and effort of selecting materials, mail-ordering, and making them myself, and I don't have to worry about the wire breaking.
View detail
It's a bit expensive
I think this price is a bit high for Valve, but it's cheaper than OEM and I don't blame them. It lights up fine, but I'm not sure how durable it is. View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
If you choose one for reliability, you have one choice.
I didn't think of any other manufacturer because my previous car was also equipped with Mats Stripe.
The OEM and durability of the W series are good, and I hesitated to replace it, but I thought that I wanted illumination on dark night roads such as mountains, so I did not hesitate to choose this product that I had a good feeling so far.
After all, it became easy to drive on the road at night.
The color of the Valve is not habitual, and it illuminates with natural color.
It's easy to install, durability is as good as OEM, illumination and visibility is up, and it looks clearer than a bad White type.
We considered the slightly higher price to be insurance because it is carefully manufactured Made in Japan.
If you want to be safe on the road at night, this is the Valve of Recommendation.
View detail
it is normal
Product Name
M&H Pine Stripe MAnd H Pine Stripe Double Base Bulb S25 BAY15D
Item Number
1P3407C
Vehicles
DREAM110
Number of man-hours
Around 5 minutes
Why did you choose this product?
I bought this as a for repair because my Tail lamp was out.
The reason why I chose it is that it is inexpensive, which is a Large reason.
I decided to use regular bulbs because it was not worth it to replace them so many times when I changed to LEDs.
Impressions after using it
You can definitely use it and it will light up if the Size compatibility with the vehicle is not wrong.
If it does not light up, it is likely that you bought the wrong product or the product Body is defective.
The product I bought worked fine for both the tail light and Brake light, so the vehicle was repaired without any problems.
▼ Attention
Size and Type vary from vehicle to vehicle, so you need to research before you buy.
View detail
Yellow color signal moving, its effect is "safety"
[Background]
Originally, I had experienced the Merit of Yellow color light in bad conditions such as heavy snowstorm, heavy rain in the middle of the night, and thick fog with a 4-wheeled vehicle, and I liked to introduce this kind of Yellow color system Lamp to a 4-wheeled vehicle (it is legal because it is an old vehicle).
But with motorcycles, I don't ride in bad weather like that. I have a different purpose.
The Motorcycle is designed to be ridden mainly in the city, not for late night adventures into the suburbs or mountain passes with poor street lighting, or for high speed attacks on corners at night (more distance visibility...). I don't even use it for such purposes.
It is also not intended as a mere Fashion (Color Lamp).
The purpose and benefit of the most Large is to be used in urban areas where there are many vehicles. "Visible." It is located at.
[Effect]
The type of car is a second-class moped, and the exhaust sound is moderate, so it is easy to be buried in the surrounding traffic, and I was often neglected and had a near miss.
There have been many cases where we have been overlooked because we are a small type, or misunderstood to be large and strong and forced to make a right left turn (our priority) while we were visible, or overpowering lane changes, or mistaken for a moped and pulled over. This is the fate of motorcycles. There are many cases in which we have prevented accidents by avoiding or yielding to them.
However, since I changed to this light color, the dangerous behavior of oncoming vehicles that questioned my good sense has been reduced to a large extent, probably because the Yellow Lamp, which is the “caution color”, is first seen in front of the vehicle. When running side by side, there is more room in the interval with the vehicle, and there is a happy effect.
Of course, we can't expect it to work on Level's disqualified drivers who play with their phones while running, so we'll have to stay on our toes. "Yellow color." Although the principle of the system is different, I feel that it is as effective in reducing risk factors as a driver assistance device.
Also, the illuminance is there and the Demerit with lowered color temperature is less, which is helpful. The Lamp shape is not irregular, so there is no change in the optical axis (useless scattered light).
[Addendum]
I don't dare to write about it, but unlike LEDs, which have a different circuit system, replacing the bulb only took a few minutes.
I have not yet evaluated the durability of this product as it has not been replaced for six months.
In the midst of the increase of super-brightness White color LED with a reasonable price, I think that this price range is quite expensive in Halogen bulb.
However, since the Merit (accident prevention) that can be obtained is Large threshold, I judged that it is good for the cosmetics.
"Visible." For example, the same effect may exist for White LED bulbs. However, the light quantity increase Large and the color temperature change are different things.
If you look at opinions on traffic manners on the Net, etc., you will see that people are trying to solve the problem with light intensity too much. The glare. The impression and reputation that retrofit HIDs and blinding LEDs give to the surroundings (such as oncoming cars) is bad. Rather than scattering a dazzling light without consideration for the surroundings and having the other party kill me, I choose this one.
When purchasing, we recommend that you check not only the price but also the W properly, because there are some products with similar shapes and functions but with different brightness, so that you do not inadvertently choose a darker type rating than the rated one.
It might be hard to get one soon, so if you're not sure, don't delay...
View detail
Fits: Others
LED light bulbs that often run out
I found this LED bulb when I was troubled because Tachometer's bulbs often go out. I put it on and the bulb color is perfect. When the RPM is low, it is blinking because it is LED. When I turn it and the amount of power generation stabilizes, it lights up normally. I think I'll change the speed meter to LED when the bulb is out. View detail
Bright.
LargeSatisfied. But it may be too bright depending on where it is used. View detail
Stable M&H.
I have no complaints about the quality and price. View detail