Reviews
For the look and feel of CustomSpec.
I've never actually used it as a Stand Hook, but I installed it for custom purposes. It's easy to install and the quality is very good. For the price, this is a great value for the quality. View detail
I'm modifying it for VTR250 maintenance.
I bought it like Center Stand for VTR250 maintenance. However, VTR250 doesn't have an installation boss. This time, I made it with the waste material of Aluminum sash. For the time being, it can be used, but if a problem occurs in the durability because the material is aluminum, I will weld the iron plate and produce it seriously. View detail
I think it was a little short …
I'm looking for a functional beauty rather than a shiningly custom look, so I went with this one.
Just the fact that it's called MORIWAKI at this price is ok. lol
My SC30 is too short for this car, so I put a collar on it. If you want a custom feeling, you may not be able to use it;
View detail
unaffected and sober
It's great because it's cheap and you don't have to worry about the scratches that come with the Hook.
It's not needlessly flashy in design, and you can use it without worrying about the motorcycle vibe.
It doesn't fall off, doesn't break, doesn't look shabby, and doesn't look shabby because of the color loss, and yet it's available in each size, so it's like this is the only Stand Hook that's available.
View detail
No complaints
I am complaining.
Regarding color and installation
There are other products that are cheaper, but I'm glad I didn't stint on them and went with the Brand one!
https://www.webike.net/sd/21762408/
View detail
This is for heavy vehicles anyway.
I adopted it, not because it's MORIWAKI, but because it's cheap and solid. I use Skid Pad on my heavy car for now because I'm worried about falling down.
However, since it is attached to the engine hanger, the burden is concentrated on the attachment part in a severe fall. 1300 has cracked the engine hanger… it is good for a light fall, but be prepared for this kind of demerit in a severe fall.
View detail
Dedicated products for car models to ensure
This year's CBR600RR has the SIDE covered entirely in Cowl, so this kind of When installing the Slider, the drilling of a hole in the cowl is mandatory, but this product has the It comes with a backing paper to confirm its position, so you can easily process it yourself (if you have the tools) I think
Also, I actually fell over once (at UTurn), but this product and the Side bag are not the same I was able to completely guard the Damage to the Body
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Great
I don't know how to install it because I ordered it from HondaDREAM, but it doesn't emit light on this product This is a review by Type, and is attached to the BOLDOR in Black, but it is a review by Circuit Thanks to this Slider, Cowl, you can protect Tank intact during SlipDown in Even though the Bar End was only slightly scuffed and I was wearing it as a good luck charm He is a small guardian angel View detail
generally speaking
I chose it by Brand name and price
I felt the diameter was a bit small
It would have been nice if there was a setting for other colors as well as Silver, but..
View detail
Easy to install, solid and good
I used it on my ZEPHYR1100
It's very easy to install, and it's very easy to put on, and it's very much in the Construction Manual Torqueetc. was explained
I would like to make sure I don't buy the same thing, but I would buy it again in case of an emergency
View detail
Simple Stand Hook
important item
[Was there anything that disappointed you? nothing special
Do you have any wishes or improvements you would like to make for the Manufacturer?
nothing special
[Do you have any products to compare it to?
JTrip
Frequently Asked Items
What made you decide to buy? Simple construction
How was your experience with it? Simple and low-profile, the Swing Arm has a Hook You must be careful not to damage the part
Was the installation difficult? Just Bolt it in place
【Please tell me the installation point and hang】 person who misses every time
Screw lock for those who do not remove the Grease
[Was the Instruction Manual easy to understand? Not required
[Included Parts:were they on? None
[Others]
View detail
It's low-cost and unobtrusive
I was looking for something that was as unassertive as possible since I'm a humble motorcycle
It is GOOD that it is not flashy and is small and casual
I use it every day and I'm satisfied with it without any problems
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
Safety in case of falling down
I installed it for the CB400SB, a wide 4 cylinder Engine There has been some standing stalling and other problems with the EngineCrankcase, but thanks to this, the EngineCrankcase has There is no damage It's modest, but effective View detail
Moriwaki SKID PAD mounted to a HONDA RC42
The skid pads are very nice made, fitting is without any problems, materials and mounting bolts are high quality. Gives a good protection for Motor and is very stable. View detail
It's usually good
It's usually good It doesn't come off, it doesn't have mounting problems, and it doesn't have any good points to take up It's just plain good I like YOSHIMURA and MORIWAKI large in the generation, so the feeling of that also enters It is View detail
That's what MORIWAKI is all about!
The quality is as good as the OEM Option
Of course, the Product Contents of the product sent to me were also correct
It is easy to install for anyone to understand
You are a very reliable Manufacturer!
View detail
Fits: YAMAHA Universal, HONDA Universal
Circuit also protects Motorcycle
Twin link Enjoy Sports driving at Motegi,
The other day, Front tire lost Grip at 5 Corner and crashed,
SkidPad made by MORIWAKI (And TSR's Racing Footpeg) Thanks to,
Cowl, Handlebar, Brake lever, and when it falls there is always an influence Parts are nearly intact!
I thought again that it was a reliable Brand packed with know-how cultivated in Race.
View detail
There is no complaint at all.
I was looking for something something with Stand Hook. It is made by MORIWAKI, both texture and accuracy, there is no problem at all. It is cheaper and satisfied than what other Anodized Treatment is doing. View detail
Eventually
Because it was uneasy, after all, I had you install it at Shop. Because the weight of a single car is less than 300 kilos, it does not seem to work out with this Pad if it actually falls down, but it is good for design and it can be trusted because many other people are also attached think. View detail
Simple is best!
Some products have finished with Beauty Color as in Dress-upItems,
The simple finish of the color of the genus of the genus is a good item with good liking.
It is a product of a company that is doing business for Race called MORIWAKI,
There will not be any mistakes.
View detail