Reviews
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
What is the cause of the malfunction?
SR400 is acting up again. The fuel mixture is unstable again. Next, I suspected that the valve might be slightly open due to lack of play, so I increased the play, but it didn't work. Next, Pilot screw is a key part of Carburetor, and if Throw system is not stable, we should suspect O-ring airtightness failure. And then I read the article on Webig. Well, I remembered that the O-ring here is for Carburetor, but I replaced it with a slightly larger Universal Product. I saw no deterioration, but there was soot on the O-ring. Soot was removed and replaced with OEM. The result was the same. Incidentally, the Pilot screw has an O-ring, but the Air Screw does not. Next, I thought that the passage of the PilotAir Screw might be blocked by Gasoline. In fact, the oil level is at the limit, and I doubt it, but even when the oil level is lowered, the engine still fails. If the oil level is lowered too much, even the engine will not start. View detail
Mikuni Spring Air Screw
YOSHIMURATMR MJNLarge body Air Screw Spring, it was difficult to find it by YOSHIMURA part number, so I asked Webig to help me find it.
It took about three days to find the right one for me, and I was a little surprised to learn that it was made by Mikuni and handled by YOSHIMURA, but I was able to obtain it without incident.
Thank you very much for the trouble and inconvenience you have caused.
View detail
A must for city riding.
The TMR Carburetor has a FunnelSpec. that produces the most power, but when driving around town, it sucks in garbage, which can be detrimental to the engine. If you remove the funnel and use this Adapter as a power filter, you can prevent the intake of Garbage, etc. and extend the engine's life. View detail
Reliable OEM Product
If you want to buy CarburetorParts, it is definitely an OEM Product.
Some universal products can be used without problems, but considering accuracy, it is better to use OEM products, even if they are a little more expensive.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
SST is required around Chalk.
Material used for ChalkValve:It is a Plastic Cap, which I replaced because it was whitened, but SST is required to remove and install the ChalkPlunger itself. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Areas of obsession
White Material attached to the head of the ROD of Acceleration Pump.:This is a Plastic Cap. In order to improve the operation of the acceleration pump, it seems that this cap is made to shake its head when Lever pushes the pump.
I feel a kind of obsession with these small parts when compared to the FCR Carburetor Body. However, it is not clear if it is a part that needs to be replaced.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Well torn.
RubberBoots are the bellows that cover the shaft of the acceleration pump. If they are torn, water and dust can enter the plunger of the acceleration pump.
Maintenance for replacing acceleration pumps is easy, but be sure to remember the parts structure of the plunger and assemble it correctly.
View detail
Can be used on YZ125X, TMX38
Can be used on YZ125X, TMX38 View detail
large sums of money
It's not a particularly special O-ring, but the parts price is significantly higher than other Repair Parts. Is it because it is not a place that is frequently replaced & each caliber is different?
Grease up somewhat when incorporating to avoid causing bite. (Because it is expensive).
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Necessary to fix Idle Adjuster to Float chamber
It would be helpful if you could include it in the LongIdle Adjuster for TMR as a separate accessory part.
In the case of TMR, it is difficult to lose as a top cover screw, so there is little chance of replacing it unless it is rusted or something.
View detail
I don't change it much, but...
Purchased for Setting
I don't change the Setting too often, but it's nice to have Stock on hand.
View detail
Purchased for Setting
Purchased for Setting
Data removal is necessary to avoid getting lost in the maze
Try buying a batch of numbers that are close to each other, and it works well for those who can tell the change if the number changes even a little.
The joy of getting a Setting is irreplaceable!
View detail
Purchased for Setting
Purchased for Setting
Data removal is necessary to avoid getting lost in the maze
Used for Mikunicarburetor
View detail
Purchased for Carburetor setting
Purchased for Setting
Data removal is necessary to avoid getting lost in the maze
View detail
And the fine numbering.
Mikuni's overwhelming inventory helps us find what we're looking for quickly!
As I have written in the past, Mikuni and KEIHIN, the two giants of the market.
Which one you prefer is a maniacal story.
View detail
KEIHIN and Mikuni
It is usable without any Trouble.
I also have it as a Stock, but it's a personal choice between Mikuni and KEIHIN… which one I prefer is too maniacal w
View detail
Mounted on Izumi F26
For YOSHIMURA Mikuni TM-MJN24
It was chewing air, so I installed it on an Izumi F26.
Quality was not a problem.
Low prices and Quantity:I bought about 1 set of 4pcs. because the price is similar everywhere I looked.
It's better to have it, I suppose.
Mikuni Mikuni:701-124-0002 Gasket F.C.B.
Purchased together with the same evaluation.
If you are handy, you probably made it yourself.
WeBig is very easy to purchase and we mainly buy OEM new products.
View detail
Whatever it may call it, the advantage to the external article of an original manufacturer's product is exhausted to this without the uneasiness of accuracy. Although it was back-ordered at the time of an order, it was kept waiting for a month by the
Whatever it may call it, the advantage to the external article of an original manufacturer's product is exhausted to this without the uneasiness of accuracy.
Although it was back-ordered at the time of an order, it was kept waiting for a month by the manufacturer missing item and what is comparatively high-priced than an external article cannot be denied, if the charge of safe is considered, it can allow well.
In saying, they are four stars!!
View detail
Fits: Others For TDMR Carburetor Small body (Φ28-Φ35), Others For TMR Carburetor Small body (Φ28-Φ35)
Jet needle replacement
I bent the original one and replaced it with a new one, works without any problems. View detail
TS200R carburetorOEM
It does not seem to be discontinued by SEA BASS.
It hits 13200-08D00.
The one that hits 13200-08D01 is Needle for 6DHY36, but I could not find this one anywhere.
The same Needle that was removed was visibly thinner than the new one, showing how worn it had become.
Refresh of the OthersBrass parts and Float valve improved the fuel consumption to about 19.5km.
Adjustment is completed by slightly tightening the Air Screw.
View detail