Reviews
Where Solder is connected, etc.
It can be used for branching connection with a solder, protection of Cable, etc.
It would be better to shrink them with a heat gun, but they are shrinked by lightly frying them with a lighter.
Be careful not to put the flame too close to it or it will melt.
View detail
put together in a presentable manner
Recent Small blinker wiring is ultrafine
It's as if it would tear into a thousand pieces if you applied a little too much force.
If you attach it as it is, it will surely break off.
And it looks bad Parenthesis.
So I reinforced it through Tube.
Finished by decorating with an Amigumi Sleeve
Just this much will make it look so much better.
It's definitely better than the BlinkerWiring roundup.
View detail
For power supply routing
Used for connection to USB power supply, 12V/5A current (60W) No particular problem since it can be used up to
The insulation coating is also thin, making it a perfect match for Bullet Type Terminals.
Color-coded Black/Red is also a good choice.
View detail
Cospa best
After wearing Wiring as a solder, the process is easy and Beauty. View detail
Expected heat resistance
The power supply wiring needs to be passed through the side of the engine, and to protect the wiring from heat, this product was placed over the 5ΦColgate Tube because it has higher heat resistance than the ordinary Colgate Tube. When you put the wiring through the Colgate Tube, you can easily put the wiring through the Colgate Tube by squeezing the Tube as described in the Instruction Manual.
The Tube is elastic and fits perfectly to the thickness of the Wiring you pass through, so it looks neat.
After cutting the Tube, it will fray, but this will not be a problem if you fry it with a lighter when you cut it.
I gave it a 4 because of the somewhat high price.
View detail
Easy to use
I have never bought a double cord before, but this time I bought it to install a DriveRecorder in my car. 6 meters were left over and I was going to keep them for motorcycle use, but I had to install them in two cars in a hurry, so I ended up using all of them.
0.75 is the thickness of the wiring cord I often use, and the same 0.75 single is used for playing with the electrical components of my motorcycle. I have never had any durability problems with Emon's Wiring Cords, and I feel that I can use them with confidence. I am going to redo the wiring of my Motorcycle DriveRecorder, etc., so I am thinking of using a double cord to make it reflect. I will buy and use this Wiring Cord again.
View detail
It is used for DIY of the stationary portion of the single seat cover of Ninja250R. Although the thing of plating of the company was used, since it had been divided in vibration, the tougher stainless was chosen. Reinforcement, distortion-proof, a
It is used for DIY of the stationary portion of the single seat cover of Ninja250R.
Although the thing of plating of the company was used, since it had been divided in vibration, the tougher stainless was chosen.
Reinforcement, distortion-proof, and rust-proof are the honor students unique to a stainless, and are high. [ of cost performance ]
Since the hole is made, as soon as it processes it with a bolt, it can treat freely.
While it is hard, what processing is hard to carry out is unavoidable.
View detail
A wide variety of products
I like that there are so many different types to choose from for different purposes.
However, it is quite expensive compared to the quantity sales at specialty stores.
But you buy them because they're so convenient to get anywhere.
View detail
It also prevents Wiring from being bent.
The foreign-made extremely SmallBlinker's Wiring is very thin, isn't it?
I'm afraid I'm going to have to use a Shrinkable Tube for fear of breaking the wire at the slightest thing.
and wrapped it with a reticulated protective tube.
If you heat it up, it will shrink normally, so it's just a matter of fine-tuning how far you want it to shrink.
View detail
You can arrange freely.
It can be used in a wide variety of ways. I used the Bracket to move the Normal horne from one place to another, and it is easy to work with, light and strong. View detail
To protect the wiring
It is convenient for the final finish when the wiring is processed by the homebrew and the waterproof performance and the condition of the appearance becomes very good. It is easy to use and the heat of the dryer warms the cut to the required length and the heat of the Dryer makes it look as if the PRO worked. View detail
Convenient to have
It's not easy to evaluate because it's a consumable product, but it's just normal to use.
It's seared with a lighter, but be careful not to overheat it.
You'll want to have different sizes available in your toolbox as well.
https://www.webike.net/sd/23201838/
https://www.webike.net/sd/1353172/
I will buy another one.
View detail
Trouble prevention.
It is very easy to protect the wiring and helps to prevent the waterproof effect and shorting. View detail
It is time-tested emon stay. I use for silencer fixation of 2st. Although it is also easy to process iron one by being cheap, since it is a portion which is conspicuous when it rusts, the stainless is used. Since troubles are suffered [ a litt
It is time-tested emon stay.
I use for silencer fixation of 2st.
Although it is also easy to process iron one by being cheap, since it is a portion which is conspicuous when it rusts, the stainless is used.
Since troubles are suffered [ a little ] to bend to the sentence cutting and sharp, it will be convenient if there are a vice etc.
Since it has put on the home center or the car accessory corner mostly, it is preeminent also for availability.
View detail