Reviews
super curve
I installed it on a 20-year-old model, and it's very cute and good ------------------------------------------ ---------------- It was installed in 20 years, but it is very cute and good Powered by Google Translator View detail
It seems to be attached to everything.
Knuckle guard is a cheap and not so bad design.
Mirror co-tightening is used to secure it, so it may be attached to anything, not just CUBs.
I can't help but think it would be better if Black was available in the color.
View detail
It's an exquisite piece!
[How is it used?
It is installed on Yamaha's WR155R.
Was the one you received as per Image?
As shown in the Image, this is my third time using it.
Was the installation difficult?
Since it was originally designed for business motorcycles, we installed it on the premise that it would be modified.
It was installed by simply Cut.
How was your experience with it?
It is a superb product.
You may often see them on business motorcycles.
The reason is simple. Because it is functional.
Handlebar covers and grip heaters on cold days, thick gloves and off-road hand guards...
We have tried many things.
But none of them committed to results.
Handlebar Cover > When the Handlebar Cover is on, it is too large and difficult to operate. Also, it gets dirty when it rains. However, I don't want to take it off every time.
Grip heater > It is indeed warm. There are also products that are hot enough. However, the grips are thicker and harder to operate. Palm of the hand is warm, but the wind hits the back of the hand. No, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no.
Thick gloves > Warm palm and back of hand, better than Handlebar Cover, but worst in operation. But operability is the worst. Large risk of accidents.
It is true that it can protect from wind, but the area is small, and hands get wet.
I used a combination of these and other methods, but still could not reach the desired Level.
That's when I found it. MARUTO Knuckle guard
I was scared when I saw this Forme, which looks like it might be attached to a CUB delivered by a melancholy noodle shop owner.
Sure, they may look tacky. But the longer I look at it, the cuter it looks←Is it just me? LOL!
The key functional aspect. This is hard to tell without using it, but I think it is very well thought out.
Shape that extends to protect against wind from the front and to keep hands dry when stopped. Material that can be attached to anything if you want to.:Plastic。
And this price.
I must say it is superb.
If you put this on and wear some gloves, you will not get wet on a rainy day. And the wind is not cold.
It is cold, but I don't mind it so much because I can do Throttle work with peace of mind.
This time, I installed it on Yamaha's WR155R model, so I roughly cut and installed it, but it is working fine.
I think it is a part that brings us closer to a true commuter's motorcycle.
I know many people avoid this Knuckle guard because of the way it looks.
It is one of the best cosmetics products.
[Included Parts:were they on?
Mirror Adapter and Washeretc. were included. But I did not use them this time.
[Was there anything that disappointed you?
There is no such point, but I think it would be good if the design is further enhanced to have universal characteristics.
Also, more Color variations would be nice.
It is a product that we hope they will continue to make in the future because it is the most cost-effective.
View detail
This is another winter staple.
This will be another standard wintertime PART.
Knuckle guard is not for protection but for warmth. There are White Gel like mine, Transparent, and White Gel. [Color] Smoke, etc.
I'm aiming for wildness, so I'm using White Gel.
good point
It is wind-shielded, so hands are not cold even when driving in winter.
Easy to install and remove, so it can be put on when you want to use it, and off when you don't want to use it.
It seems to be possible to divert it to other car models.
A bad point
It is not Stylish.
But I like that.
HandlebarHeater is also useful, but these analogue parts are also very interesting.
View detail
I installed the Knuckle guard. (^_^)
I installed and drove it, and it changed for Large. It is the best for aerodynamic drag reduction, cold weather protection, and cost performance. View detail
Ideal for rain and wind protection
I added a hole to the Windscreen on my TODAY50 AF and installed it.
As a self-proclaimed Hand guardMania, I have to say that the material is very flexible and the risk of damage is low even if you hit or roll.
View detail
Perfect Items
I installed it on a YAMAHA X1R car model.
Originally, I put it on MATE and CUB.
These are the items you attach to a working motorcycle.
I had installed it on my CUB90 before and was so impressed with its performance that I bought it for another vehicle.
You can buy a bracket at the home center and wear it to arrive.
The advantage of this Handlebar Cover lies in the Large-Shell.
It completely covers your hands, so you won't get wet at all on a rainy day.
Also, even on a snowy day, you won't get wet, but you won't feel the cold as much because the wind won't hit you.
I have used various Handlebar covers and Hand guards, but this one solves everything.
If I had to pick one thing, it's that it looks plain. It's a large cover, so it fits CUBs and the like, but it looks pretty big on other motorcycles.
But it's so much more than that, it's a great product to wear without worrying about how it looks.
View detail
For touring in the snow!
Naturally it's very cold in Toyama in February, and in some cases it's snowing It's so cold on a motorcycle in the winter, but going all the way to the snow is just plain stupid LOL!
I had a Grip heater in it, but I had to protect my hands from the wind, rain and snow I've seen a lot of CUB-type motorcyclists wearing the same thing on the streets I see it all the time, although I'm not sure it's as good as Komine's HandlebarWarmer It's pretty standard
This time it's the DAX and SUPER CUB110 (JA07) I've installed it on the, but all I have to do to install it is bite into the Mirror part! It's really easy There is no problem, especially with the body of the car
Even if it interferes, it doesn't seem to be a very hard material, so I think processing itself is not difficult It is
It works better than I thought it would and blocks the driving wind Just as a matter of course, it will keep the driving wind out, but if the temperature is low to begin with, what's cold is cold If the combination of the HandlebarWarmer + Grip heater is this guy's.. Riding in winter must be quite comfortable Also, the fact that it prevents the wind from blowing means that it can protect your hands from stepping stones, which is also effective in terms of safety I think it will protect your hands from the rain and so on to some extent
It looks tougher than I expected and it's White in color It's not a cool looking product (laughs), but the price is low and the performance is excellent (Wind resistance) is all right, isn't it?
If you don't mind the look, the running wind, the cold, you're in for a treat!
View detail
I couldn't do this one..
After replacing the Handlebar of the CROSS CUB, I put a cover on the Right Side I followed the instruction manual and tried to put it in, but Brake lightly left it in It has become It's very dangerous if you eat the play part and start running In addition, the Brake Lock section gets in the way and it's hard to get the cover in as far as it's needed It might be a little small in the CROSS CUB I can't even return it because I made a cut to fit it The next time I have to get a large one... I think Scooter and SUPER CUB will fit in it Nah View detail
I am satisfied.
Installation of Right Handlebar finished without problem. LeftHandlebar has no Clutch or Brake lever so I was worried about fixing, but I realized that there is no problem with installation. Correct as a counter measure against cold! View detail
Excellent practicality
Small machined to CB 125 T and mounted. Because it was for Mirror hole 8 mm, it expanded with Taper reamer. Throttle side alone was Large, but because it is for CUB with no Clutch lever, we extended the Clutch side with Bracket and installed it. There are few commercially available Brackets with 10 mm Bolt, and HOME's u character BoltBracketCorner was perfect for not being too long. Although it is summer from now, I would like to expect cold weather in winter. View detail
It's always cold when it's cold
I bought it for touring in the snow
The vehicle used was a Honda TL125IHATOVO
It's a 6V car, so there's no way the Grip heater will heat up properly I didn't want to use the Handlebar Cover because I was afraid to use it in the event of a fall
That's when I discovered this Malt Knuckle guard
It's not just for SUPER CUBs, it's for off-road motorcycles The guard surface is wide enough to block most of the driving wind
The Right Side is co-tightened to the Mirror mount for installation on IHATOVO I was able to install it with no problems
Unlike the SUPER CUB, the Left Side has a Clutch lever I cut the part that interferes with the Clutch lever and installed it
It is a soft material, so if you have a large-textured Nipper or Saw for woodworking, you can use it for It's easy to cut (I couldn't do it with Scissors, though)
It's a good installation and it guards the driving wind
However, there was a Large miscalculation …
I installed it for use in snowy mountains, but the snowy mountains are fundamentally cooler than the driving wind It's low & hellip;
In other words, whether you keep the wind out or not, what's cold is cold! LOL!
I think it would have been completely different if I had a Grip heater, but the Knuckle With guardSingle Body, it's obviously irrelevant to the low temperatures lol
But it's very good for wind protection on flat ground and for guarding against rainwater, so for those who use it that way It is very recommendable
Best of all, it's very cheap, so lol
View detail
Required for winter CUB
SUPER CUB110 (JA07) It got on.
Since it is wearing OEMScreen, it can not be installed as it is.
It is wearing EmonBracket biting.
Volume Because it is Large, the wind has drastically decreased.
Midwinter is also the strongest with Triple wearing Handlebar Cover and Grip heater.
View detail
I am satisfied..
I think that it is really performance as expected. Once you put it on, you can not remove the cold weather.
However, I feel that Large is too much for good performance. But I am satisfied ^ ^;
View detail
Bike riders always fight with cold. And they hesitate to have a handle cover, the cold protection item, to the very last possible moment. Now, I've reached for that forbidden fruit.[Installation]The installation is easy. All you need to do is
Bike riders always fight with cold. And they hesitate to have a handle cover, the cold protection item, to the very last possible moment. Now, I've reached for that forbidden fruit.
[Installation]
The installation is easy. All you need to do is to pierce the lever and the grip to the hole on the side of the handle cover, and then fasten it with the string attached to the mirror. You need to make sure that it is securely fastened.
* I've installed it on SUPER CUB, just below its knuckle guard. There's nothing to interfere the operation; no problem.
* In case of SUPER CUB, there is no clutch lever, as the clutch is rotary type. So it becomes a little loose compared to the accelerator side.
[Operation]
* There is no problem operating the accelerator , brake or blinker. But as the blinker of SUPER CUB is located on the right handle, it is a little hard to move the switch up and down to light it.
If you have big type of gloves like winter gloves, you will have trouble putting into that inside the handle cover. If you can put it inside, you will then not be able to move it. So you better have gloves for spring or fall.
[Wind-proof, Cold-proof]
* Temperature: 10 degrees (C). Strong Wind. I was using it along with the knuckle guard, and didn't feel the wind at all. The wind-proof effect is superb, and you can drive in the cold weather. However, it's not that warm inside the handle cover. It depends on what kind of gloves you have.
* Temperature: 2 degrees (C). It is cold inside the handle cover, but it's not the level that you can't stand. I could drive without having trouble operating the handle. But I thought at least I need to have inner gloves in case I am wearing spring/fall gloves.
[Concerns]
* I got concerned about some points, although this was my first handle cover.
(1) The raised fabric inside is too short, and its heating and heat-retaining effect isn't so good. I was expecting a more downy thing.
(2) The thumb is made transparent, and it's kind enough to make the thumb movement visible. But, you actually don't look at the switches while driving , so I doubt its necessity in the first place.
[Overview]
* Its an excellent item with wind-proof and cold-proof effect. It's cost-effective for its price. It does make sense that it s being said that it becomes the best when you use it with a grip heater. If you do not have a grip heater, you better have gloves with heating and heat-insulating effect.
View detail
Although several sheets were used by the old type CUB besides Marthe, it fits from general-purpose article of a Home center. The sheets of the old type CUB were necessaries that it is easy to be torn.
Although several sheets were used by the old type CUB besides Marthe, it fits from
general-purpose article of a Home center.
The sheets of the old type CUB were necessaries that it is easy to be torn.
View detail
A hand would not be earlier taken out with what, a difference can be felt to such an extent that it says -- although the hand was numb with cold only with protection-against-the-cold glove, it came out very much and it carried out -- -- if
A hand would not be earlier taken out with what,
a difference can be felt to such an extent that it says -- although the hand was numb with cold only with
protection-against-the-cold glove, it came out very much and it carried out --
-- if it is about -3 ℃ after attaching this, since Vinyl processing is carried out, an empty hand snugly
surface.
it is being unable to use also flipping a little rain off and, as for the sushi
difficulty which was very good shopping, a draft's entering a little from a Handle part by the relation of a Mirror mounting hole being small which it passes, and cannot be come out of and attached, but has been forcibly fastened with the
string, and the
Parking brake
View detail
The Seat cover for Kymco MovieXL was not looked for, either. Although LL of other company was attached, a Size was not able to equip small. It was tight although it was purchase and goods of real no charge on the Card Point about 4L seen by thi
The Seat cover for Kymco MovieXL was not looked for, either.
Although LL of
other company was attached, a Size was not able to equip small.
It was tight although it was purchase and goods of real no charge on the Card Point about 4L seen by this HP there.
View detail
It worried about the measure against cold of a winter season with the Handle Warmer, and equipped here. In the case of a Handle Warmer, receipts and payments of a hand are somewhat troublesome, but if it is this Knuckle guard, those worries do not exist.
It worried about the measure against cold of a winter season with the Handle Warmer, and equipped here. In the case of a Handle Warmer, receipts and payments of a hand are somewhat troublesome, but if it is this Knuckle guard, those worries do not exist. however, if it says by warmth, a Handle Warmer cannot be won, but it is satisfactory, if the glove for winter is carried out since a running wind is not equivalent to a hand directly -- it is . View detail
It was able to attach besides the cub. On arctic cold long-distance touring, the ability it can be declared that cannot but attach even if it deducts appearance is demonstrated. Gravity is also light and it is No Problem in handle operation.
It was able to attach besides the cub.
On arctic cold long-distance touring, the ability it can be declared that cannot but attach even if it deducts appearance is demonstrated.
Gravity is also light and it is No Problem in handle operation.
View detail