Reviews
CBR1000RR-R uses this
The Rear Axle Nut of the CBR1000RR-R is 36mm in diameter.
The tightening torque is also high, and a box with many angles was used, but it seemed to come off, so we changed to a 36mm hexagonal box.
At the same time, I also purchased a pure STD Nut with it. I think I was able to buy peace of mind at a reasonable price with FirmlyFit. I think I was able to take countermeasures before I got injured, although I am satisfied with myself.
View detail
Purchased for personal use
[How is it used?
Purchased as an on-board tool for my motorcycle
Was the one you received as per Image?
KTC, so the texture is good and just like the Image.
How was your experience with it?
It fits with Snap and has good dimensional accuracy and can be used with confidence.
It is inexpensive, so it's great for personal use.
View detail
This eliminates the need to search for tools.
Rose and kept it in my toolbox. Separate from the tools for my main job,
It is stored in the Motorcycle garage. I use it by hooking it to the Neodymium Hook as shown in the picture, considering that it is easy to understand and within easy reach.
View detail
RokudaboPlug replacement
[How is it used?
Purchased with Plug as it is needed to replace Plug in CBR600RR PC40.
Was the one you received as per Image?
The quality of the plug wrench is good and the magnet in the plug wrench makes it easy to catch the plug.
How was your experience with it?
As a plug wrench, it does its job well and is highly rated for its texture.
However, since this was my first time replacing a 4-cylinder plug, I struggled with replacing #2 and #3 and eventually gave up and asked Motorcycle shop to do it for me.
We were told that a less thicker plug wrench would be more suitable.
I don't know if I will have to come back to it in the future, but it was good as a Plug wrenchSingle Body.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
This is a useful tool that one should have at home!
[How is it used?
I had been using a cheap Ratchet Handlebar, but it started behaving suspiciously, so I bought a new one.
Was the one you received as per Image?
KTC is a quintessential KTC company. It has a solid weight, stable operation, and I could tell immediately that it is of high quality. The tool is just as I expected.
How was your experience with it?
Accurate and stable tightening and loosening.
Although the handles are plating instead of rubber, they are less susceptible to deterioration than rubber, so durability can be expected.
[Points to note]
The switching is no problem, and it can be changed from Snap to Snap, which is totally different from cheap ones. It can be used without any problem even if it is applied in a slightly large Torque.
How did it compare to other products?
I have only used cheap ones so this may not be helpful, but I wish I had purchased it earlier as it has enabled me to install and maintain Parts accurately and consistently.
KTC is the best. It is so good that it makes me think of replacing other tools with KTC little by little.
View detail
Simple form and easy to use
I was looking for a simple and reliable tool like an in-vehicle plug wrench from a well-known tool manufacturer, and I found this product and immediately bought it because of its low price.
The price is a bargain, but the quality is so high that it fits perfectly with the plug diameter, as you would expect from a KTC product.
The rubber inside the wrench gently holds the plug in its mouth so that there is no danger of dropping it when it is removed.
Also, the tool is available in two different thicknesses at both ends:16mm = CPlug and 20.8mm = BPlug, so it can be used with CUB and MONKEY. (CPlug) and 2-stroke VESPA (BPlug) This is more convenient for me as an owner of a
However, since it is a straight type, it may only be used on cars with a large space above the plug hole.
The L-shaped bar is also very easy to use because of its ingenuity in making it possible to use it even for car models that are difficult to get space to turn.
The simple shape makes it easy to pack, so it would be excellent as an in-vehicle or portable tool.
Durability is still unknown, so it was not rated yet.
View detail
Is the length of the short method better?
I tried to make a 15-socket holder, but I didn't think about the length of the holder. I didn't think about the length of the holder, because it was about 30cm long, so I couldn't fit it in my tool box. 10-socket holders are available in the Quantity:2pc. I should have bought Set. But
It is definitely better than the Gold genus because it is made of plastic.
View detail
Poor mechanics buy toolsRose
9.The 5 tools were added in the Grip set since the number of tools has increased since the Rose purchase. The work is easy Plus No.2 Driver.
Only 1 pc.
View detail
Light and strong Tool
Expensive, but very light for carrying on rides. Easily put into a tool pack.Easy to adjust, very sturdy. A nice tool. more uses for these tools than just motorcycle riding.It serves two purposes, amateur and professional. It should be in your tool bag.Highly recommened View detail
Great tool set makes working on my bikes easy.
I like these wrenches.high quality, japaned made,feeling hand perfect.the cost is right and works fine They are quick and easy to use and I keep them with my tool box.The length is sufficient. It is not too long. It fits in the tool box. It is quick and easy to check tightness of almost every bolt on my bike with these while riding or servicing my bike.Wish they offered a set with 7mm and 13mm.Highly recommened. View detail
Good accuracy
I had been using cheap valves and Type radio pliers, but I decided to go with a proper Manufacturer's product, so I chose KTC's Radio pliers.
Even with a strong grip, there is no gap at the tip, and the precision is as expected.
View detail
For Ratchet driver
It is for Impact Driver, but I bought it for Ratchet Driver.
The length is just right and it is inexpensive, so it is very useful.
There is also a half-length No. 3, but I regret that I should have chosen the longer one.
View detail
Brass Brush, this is the one.
[How is it used?
For cleaning each part during EngineOH
Was the one you received as per Image?
As per Image
How was your experience with it?
No problems at all. It is an excellent cosmetic product.
[Points to note]
None in particular.
How did it compare to other products?
This is all I do Repeat.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Easy to use
It is very convenient for maintenance of motorcycles because a small amount of grease comes out only as much as you press it, so you can apply it without getting your hands too dirty. View detail
I should have bought sooner
Until now, the company's L-Type Quantity:It was opened and closed by twisting and turning it with Set's.
I had been thinking of getting a Type T for some time, but had held off because I thought the work time would be much the same.
However, as I got older, I changed my mind and decided that I wanted to have as much fun as possible, so I took the plunge and bought a frequently-used Size one.
When I used it, the work efficiency was different!
I regret that I have wasted my time so far.
View detail
Trusted KTC
[How is it used?
Purchased a new Driver because I lost the one I had been using.
I bought this product because I thought, "If I'm going to buy something, I'm going to buy KTC!
Was the one you received as per Image?
It was as per Image as it was a product I had originally seen.
How was your experience with it?
It is easy to grip and use, and I felt that it is a Driver that I will be able to use for a long time to come. The construction is solid, so I think it is a large difference from cheap drivers.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I use it casually.
I use it for hand-tightening, and for quick ratchet, I use it as a "pusher-pusher".
The plus-ticky part is subtle, but it is a useful product if you have it.
View detail
Similar to Pliers.
It is the same as Pliers and is well made and easy to apply force.
It also operates smoothly, so it is not a cheap product.
It is useful for detailed work, etc.
I have some Rust recently, but would like to maintain and use it.
View detail
Used for many years
It is easy to grip and apply force, so it is Firmly attached.
It is quite useful because it is sometimes used in various scenes unexpectedly.
Accuracy is good and no Wobble.
View detail
I have never licked it.
It is often used for Motorcycle maintenance.
I have never licked with this one, so the quality of accuracy etc. is indeed KTC, I can't use cheap ones like No Brand.
View detail