Reviews
Inexpensive and fully functional
Used when converting an off-road motorcycle to a Fender Eliminator.
I also had to repurchase the product because it was broken in a fall, but the inexpensive and simple installation method made it easy to fix.
It also functions perfectly, including the reflective condition.
DAYTONA products with a large lineup of such basic parts can be trusted.
View detail
Use with Bush Face's License Plate Holder.
I combined it with PolishFace's License Plate Holder. I use Cemedine's METAL Lock to fix the Holder and Bracket tightly. It has a good feeling of rigidity. View detail
Purchased for MOTO LED Edge holder kit
[How is it used?
MOTO LED Edge holder kit's
Purchased as Reflector
Was the one you received as per Image?
Yes
Was the installation difficult?
it's simple
How was your experience with it?
I prefer it without, but without Reflector
I heard that the angle has also changed, so
[Included Parts:were they on?
none in particular
[Was there anything that disappointed you?
None
Other items that would be helpful
The included SpongeSeal was helpful.
I put it on because I think it's good. Vibration prevention?
View detail
Reflector
[How is it used?
Was the one you received as per Image?
It was as shown in the Image.
Was the installation difficult?
Easy to install
How was your experience with it?
Size was just right.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Very Simple
I think it is solid, not cheap.
I like the fact that Reflector is not blobby.
For DIY installers, please be careful not to forget to buy the License Plate Light.
(I bought it without reading the description carefully and could not install it on my 400cc motorcycle lol).
I would like to utilize this in the future when converting a 125cc Motorcycle into a Fender Eliminator.
View detail
License Plate and Fender Clearance good for less vehicles.
The fixed Bolt on the ReflectorReverse side no longer interferes with the Fender. View detail
Simple and Stylish
It is simple as a bracket and the reflector is thin, so I am satisfied with the reflected look.
It is not cheaply made and is solid.
View detail
COMPRyanS w
It seems to reflect properly. w It was just right for attaching the Camera for the Dora-Reco. View detail
Easy installation
Attach with a strong double-sided tape like that used in ActionCam.
This makes it difficult to adjust the position, but there is no danger of losing it while driving.
View detail
Probably the Slimmest Reflector
[How is it used?
The Fender Eliminator Kit did not come with a reflector, so I bought this one.
Was the one you received as per Image?
Very good as per Image.
How was your experience with it?
It is very slim and matches SS Motorcycle quite well.
[Points to note]
May interfere with License Plate.
How did it compare to other products?
I think Active's Reflector is probably the most Refreshing of any Manufacturer.
View detail
![Universal LED Light [Reflector Size]](https://img.webike-cdn.net/catalogue/14762/07292206_51f668cc0718a_TS.jpg)
Very bright; good for additional brake light
I am on a mission to increase my visibilty to others while riding, and i want to do it in style. This koso led light (red) is very bright at night and good in daytime as well. This product is mounted with 3m double tape and there is no screws. I used it on posh reflector bracket. View detail
Universal and fit my bike with license plate
I purchased this bracket to use with koso universal led light. Fortunately the light fits perfectly. I also tested other reflectors on it, also fits nicely. The build quality is good and sturdy; i think this product will last forever. The paint is also good quality, i tried to scratch it but the paint wont come off. I installed this together with a daytona fender eliminator. View detail
Satisfied
Simultaneously replaced when ActiveFender Eliminator is installed.
I wanted a Slim Reflector and it turned out exactly as I wanted.
View detail
To make it a Japanese Vehicle Inspection Correspondence
This product is required to make Japanese Vehicle Inspection Correspondence when the side number is set. View detail
Small size, so it can be put anywhere.
The reflector for the DAYTONA-made License PlateFrame had somehow flown away, so we have attached this one in its place.
MONKEY has a built-in reflector in the Tail Lamp, so it is not necessary in the first place, but it is nice to have.
It has a cheap feeling, but for those who are not particular about it and want it anyway because it would be illegal without it, it is good because it is small, so it is not difficult to find a place to install it, it can be detached, and it has a Tape.
View detail
Fits: Others Medium size car and over (126cc-)
I was looking for something inconspicuous and well
It does not protrude from the License Plate and the bottom part is held in place by claws with no jiggle. The entire surface is black and the backside reflecting and the angle of the reflector is fine.
However, the price is a bit expensive.
View detail
Better quality than OEM, and of course, more room for inspection.
The foundation bracket is made by Active (adapted from Type -1 Square).
With Bracket Reflector products from various companies. There is no product with a reflector of about 35x90mm." I combined the brackets by myself. As I had hoped, I was able to install this product of 35x90mm with Type -1 Bracket almost Exactly.
Stylish slim type is not bad, but I personally like this one because it is more assertive. OEM-like Size." I like the Red color, which is slightly darker than the OEM, and the Base is solid and highly textured.
Point also has less rounded corners than those made by KITACO.
In the past, when I tried to pass a vehicle inspection with Slim type, they measured the area, but of course, this product does not do that.
It is also quite durable and the Lens has not fallen off after 5 years of exposure to VTWIN vibration.
It is a modest but good Parts.
View detail
Reflector
Easy to install, it is co-mounted on the License Plate.
Size is a little large for Reflector, but balance is good.
View detail
I guess this is the shape I'm personally looking for.
Installation is done by co-tightening with Number. I personally chose the most comfortable shape. It is also cosmetically good, and even if it fails, it will not be a problem. Oh, well. I think the price is good. View detail
Installation complete
I installed it in conjunction with the conversion of 883n to Side number.
I am satisfied with the large size.
I am a little concerned about the durability of double-sided tape.
View detail