Reviews
Inexpensive and practical
Inexpensive and practical.
Necessary and sufficient
View detail
Inexpensive and practical
Inexpensive and practical.
Necessary and sufficient
View detail
Inexpensive and practical
Inexpensive and practical.
Necessary and sufficient
View detail
To hide the hexagonal hole
Plating was peeling and falling apart, so the
Purchased to replace
It looks pretty shiny.
View detail
Osha cosmetic lid
Osha's Cap that has been around for a long time.
[How is it used?
In Bolt's Cap on Silencer Bracket.
Was the one you received as per Image?
Image itself
Was the installation difficult?
It was so easy that I was surprised.
How was your experience with it?
It was great and Parenthesis is good.
[Included Parts:were they on?
It came with an outer bag.
[Was there anything that disappointed you?
None at all.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Bolt hole concealment
When the tandem footpeg of the CT125 is removed, the bolt holes are exposed, and if water or other substances get into the holes, they can cause rust. View detail
While you are shopping
It is just a decoration, if you like.
There is no sense of discomfort as if it had been attached from the beginning.
It is completely self-satisfying because no one but the person himself notices it.
View detail
I think it's good
It is just a decoration, if you like.
There is no sense of discomfort as if it had been attached from the beginning.
It is completely self-satisfying because no one but the person himself notices it.
View detail
Looks will change.
Appearance will change.
It's expensive for a Rubber cap.
There was one part of the bolt that was hard to get in, so I used silicon spray.
View detail
Cool!
I always buy CapBottle covers from you. View detail
One point
The price is a little high, but it stands out and is fashionable when worn.
It is a little loose, but with some ingenuity, it is not a problem.
View detail
[AEBS] Dress Up Socket Bolt Cap
It fits well and it's good Please sell a lot I think I can use the leftover later The delivery arrived on time The packaging is strong View detail
HURRICANE Hole Plug
About quality and texture - Top quality. Textured surface finish on the black plastic plug and is of a strong construction allowing removal and reinstallation if required. About the feeling of use - After I removed the belt drive guards from my Buell, the exposed mounting holes looked terrible. These hole plugs from Hurricane were a perfect solution to that problem. Products to buy together - If you are also using bar end mirrors, Hurricane offer these hole plugs in various sizes to suit the OEM mirror mount points to give your bar end mirror installation that professional finish. Difficulty of installation - Very easy to install these hole plug. Just be sure the hole is clear of any debris prior and press the plug firmly all the way in. Cost performance and comparison with other products - They are a very basic part and the price from Hurricane matches that perfectly. There are other CNC machined hole plugs available from other brands at a higher cost but for me the plastic hole plug was the best option. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - If Hurricane does not have the correct size for your intended hole just go 1 size smaller and add some silastic sealant to secure it in place. View detail
I use it to prevent Rust in Screw holes.
I use this product to cover up the screw threads and to prevent rust. It is cheap to cover and comes off easily, so I now have a Habit to inspect it from time to time! View detail
Just put it on the existing bolt and dress-up!
This product is easy to dress-up just by putting it on the existing bolt, and it is easy to use if your Motorcycle has a black engine! View detail
It can be easily customized by simply covering it.
This product can be easily customized by simply placing it over an existing bolt. It can be used to hide rusted screws or as a Simple Waterproof alternative! View detail
For coloring around the Engine
Small but immeChainLarge Parts.
It is only a cap of M6 bolt, but I feel that the custom feeling will become even larger by setting several caps.
Gold tends to be too heavy, so I used it around the Engine area while racking my brains about this and that.
View detail
Cost-effectivenessOutclassing
We got this for the purpose of hiding the presence of Bolt, since there are many Red Mono Parts.
The problem with this type of small thing is that once you get into it, you lose the Drill. (Lol) 。
I'm sure it'll come off pretty easily." I thought it was a good idea, but it is fitted more firmly than I expected.
Just a Large size? Diameter? I felt that the NASA Type could hide the Bolt better.
View detail
For dress-up around Caliper
This is a Repeat item as I recently got into Cap Bolt Cover.
Gold is used as a color, but it would be too much like a "kudzu" if it is used all over the place, so red was chosen for this project.
It's just a Bolt cover, but it's a Bolt cover.
They say that just by fitting such a tiny object, the sense of custom increases.
However, I set the Caliper side to NASA Type, so it somehow failed. Crying 。
View detail
ImpactLarge, although not so subtle.
I ordered a Babyface Racing hook and a Silver cap bolt, which lacks a sense of unity.
Installation is done by "Giggle." It does not take much effort because all you have to do is push in the
Just be careful not to push too hard or it will float slightly.
Up close, it is obvious that Bolt is filling in the holes, but from the side, I think it gives a sense of Gold's cohesiveness. I think.
View detail