Reviews
Although it does not interfere with the Screen of the Rising Windshield
I bought it because it does not interfere with the Asahi Windshield Screen,
Windproof area is small. I think it's not good for cosmetics.
View detail
Quite a hassle to install.
Additional Impressions.
I referred to First's impressions and the installation was a little Large strange as described.
Instruction Manual is clunky and unfriendly!
It is explained that it can be installed without removing the cowl, but it is very difficult to do so without removing the cowl! I'd say it's impossible!
If you don't modify the position of the bracket, there will be a gap if you attach it as it is!
It says "Magic tape included" but it's not. You have to remove it from OEM and transfer it!
It looks like the Instruction Manual doesn't add Rubber molds, SpongeCushion, etc., but if you're interested, there's nothing in there, so you'll have to remove it from the OEM and relocate it successfully!
It's just a mess, made of carbon after molding! Clearance, Included Parts:, and so on!
Please install it with the assumption that it will be modified! Magical thinks that (Lol)
Installation was not difficult, but to be honest, it was quite tedious.
View detail
It's too bad it's so expensive and so poorly made.
The back of Carbon was sketchy. (Lol) If you look through the light from the back, you can see that the back is crudely made.
Magical and K Labor are not trustworthy these days because of their high prices and poor workmanship.
It would be nice if other manufacturers had parts, but most of the GSX1300R HAYABUSA's carbon is from two companies, so there is no choice.
It looks good, but I wish the price would be lower if it is made this bewilderingly messy.
View detail
Balance of quality and price...
[How is it used?
My friend's younger brother bought a new SEROW250Final edition without a rear carrier. "Let's go buy the parts we want to install!" I went to the Motorcycle Accessories store where I went and bought this Rear Carrier because it was the only one they had in stock.
Was the one you received as per Image?
In hindsight, I could have chosen many things including design etc. if I had chosen at Webike... or rather, my friend and I did. You might as well pick one from Webike's or mail order, right?" I advised him to do so. I want to buy the parts I want and install them right away." and Tension seemed to be higher. I'd rather buy something now than wait a little." I was forced to do it like that.
Rear Carrier functional parts are working fine.
Was the installation difficult?
As mentioned in others' Reviews. Can be used with OEM Assist Grip. In reality, however, the clearance between the Assist Grip and the Carrier Bracket is too narrow to allow for easy access, so modification is required.
In this sense, it is difficult to install, but if you give up the Assist Grip installation, the difficulty will be reduced (the bolt length is also included in the package and is large and strong).
How was your experience with it?
As mentioned above, there is no problem with the functional part as a Rear Carrier, and the box can be installed.
but the Design is It's like a sturdier version of Carrier for Motorcycle." I'm too plain with my...
Moreover, the Gold amount is not one of the cheapest, and to tell you the truth. If I was willing to pay this amount of Gold, I would choose a Carrier from another company with better parenthesis. It's like
[Included Parts:were they on?
The CarrierBody, collar and bolt necessary for installation are included in the package, so if you do not use the Assist Grip, you can install the CarrierBody with this product alone. (If you use the Assist Grip, you will need a collar of appropriate thickness and a longer bolt to accommodate the additional thickness.)
[Was there anything that disappointed you?
Price and Design・・・・It is hard to say how much people like the look of the product, but I think the position of the Assist Grip, which makes it difficult to use if it is attached as it is, is not well thought out for a product that costs this much in gold.
Other items that would be helpful
Point and hang of installation
If the base for the box is to be installed from the beginning, it is better to install the base on the carrier before installing the rear carrier on the car body, so that the work can be done smoothly.
[Availability and clarity of the Instruction Manual
It is an easy-to-understand product.
[Notes]
As I have already mentioned above, there are some points to note when installing the OEMAssist Grip and the Bolt mounting holes are slightly gapped (individual difference range?). It is safer to do a temporary assembly in advance.
[ITEMS TO BUY TOGETHER
If you plan to install the Rear box, it is easier to purchase it together and install the Base first.
[Opinions and requests to Manufacturer
It would be helpful if you could improve the accuracy of the product... or lower the price.
View detail
Shape.
The R shape of the sticker is smaller than that of the SEA BASS 17in. but I can't stick the sticker on the 17in. because the material of the sticker is hard like metal sticker. The cut of the sticker is also bad, and about 3 stickers do not come off from the backing paper cleanly. View detail
The price is a little higher than last year, but within an acceptable range. Quality is not so good, and it is hit or miss.
Quantities for Front and Rear:I bought it as a set
Just fit and easy to install.
The price was about 38,000 yen last year, but has now been raised to about 44,000 yen. However, this is within the acceptable range.
However, Rear Fender also wrote in the Review, Rear's price increase is vicious and should not be bought. The price has been raised by almost 30,000.
Moreover, the quality is not good, and it is hit or miss.
I think Magical still has better quality.
I probably won't buy any more LaborWolf products.
View detail
I can't get it to stick.
Even though I applied it as described, it still left a white residue. In addition, the bottom part does not fit the curvature well. In the end, I peeled it off and threw it away.
Ask Shop to install this product.
View detail
Quite tense when pasting.
[How is it used?
Since the Tank and Seat are in close contact, the longer the ride, the more fine abrasions will appear on the Tank.
I bought this product to prevent that. 2 sizes, LargeSmall, 3 sheets in total, can be shaped with scissors.
How was your experience with it?
It is quite thin in thickness but seems to be resistant to abrasions. After making a paper pattern to make a similar shape to the contact surface, it can be cut along the pattern to make a shape that corresponds to the contact surface. However, while it is easy to cut, this Seat does not seem to be able to protect against sharp objects. Durability is hard to say at this point.
How did it compare to other products?
This is my first time using this type of product.
[Points to note]
I bought the one with luster and carefully applied it to a glossy tank, but it has a few air bubbles, and as noted in the notes, there are wrinkles where there are curved surfaces. It seems that you don't need to worry about it if the shape is simple.
View detail
not quite
No way, there is a round hole in it.
I can't believe they framed a Seal like Logo design's Cushion...
Low rating because the design is not good.
Grip is Normal I think it is. I think it's better than when I don't have it on.
Grip.
View detail
Exterior Kit
I am disappointed with the price increase. I used to be able to buy it for $2,000. (T_T) View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR, KAWASAKI Z750 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200, KAWASAKI ZZR1200
Mount Screw
I was looking for a black Titanium, but I couldn't find a good one, so I chose this one. I tightened the bolt lightly by hand until it stopped, but when I looked closely, I found that the screw at the tip of the bolt had been crushed. I thought there was a problem with the Bolt, because the other Bolts I had went in without any problem. It is a waste of money, but I am afraid to use a tool to tighten it, so I will look for another one. View detail
Not what I was expecting lol.
I bought the Logo from RyTEC because I thought it was stylish, but I didn't think PadBody would be. [Color] I didn't think it was Clear.
If you put it on a black tank, you can't even see the logo.
If you accidentally touch the back side, fingerprints will be left behind and you won't be able to remove them.
View detail
also
Quantity:Pair (for Left and Right) I stuck it on the Tandem Seat Cover, which is not symmetrical and looks delicate.
After one night, the double-sided tape was not sticky (degreased) and the fitting was not good, so it was lifting. I removed the double-sided tape as soon as possible because there was a risk of it falling off while driving.
I don't even think I would want to install double-sided tape until I had to reapply it.
It was futile.
The product image shows only one direction and is a small size.
I wanted images taken from Up and multiple directions.
If you do, you will be exposed to the poor quality of the product.
View detail
Not attached to JB03
The Bracket is no longer usable. I thought it could be attached to the current JB03 since it was indicated for JB02 and up, but I lost it. View detail
solid construction
The price is higher than other manufacturers' products, but the construction is solid. Installation is easy, but I almost missed the included bolt and collar, which are located at the bottom of the box, under the cushioning material. View detail
Product Details
I didn't know that stopping the Rear Fender was a Thailand Wrap. View detail
Accuracy?
I put it on a Cb250r.2019MODEL.
The holes in the bracket that attach to the body do not line up with the screw holes in the body.
As a stopgap measure, we deformed it with Pliers and installed it.
Therefore, BlinkerLeft is slightly distorted.
I'm not that picky, so I'll just bite the bullet and go with it.
I am disappointed in this accuracy as I purchased it for $10,000.
Also, the Instruction Manual is a single sheet of paper and quite unfriendly.
I referred to the blog of a kind person who purchased and installed another company's product.
There will be no more Repeat of products here in the future.
View detail
Hurdle expensive to put up as DIY
I saw a Mirror style Rim sticker on the street that was good for Parenthesis, so I introduced it.
I bought it because it is YOSHIMURABrand and I had high expectations, but there was an unexpected pitfall…
First of all, it is difficult to paste.
This may depend on the size of the wheel rim and the presence of coating, but it is very difficult to apply and does not stick.
And although this is a quality issue, there were many areas where the cutting was not done properly and the MirrorMaterial peeled off.
At first, I pasted it all up, but the result was, well, terrible.
Even I, who am used to attaching stickers, can see the results, so it may be tough for beginners.
If possible, you should pay Shop to do this work. The price is also high, so if you are afraid of failure, you should ask Shop to put it on.
Looks great! If you can put it up well, you will be very satisfied.
View detail
Fits: KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
Hmm
The design is good, but as other posters have said, the hole in the base of the Tail lamp is very disappointing…
I think it would be better to have a bare bracket without the base. Also, I am concerned that the Tail lamp will be Up because there is no adjustment mechanism on the base…
It's a waste because the design of Fender itself is really good!
View detail
Depending on the speed range, the rating...
The OEM Meter visor was somewhat more effective than it looked, but this product is very windproof and can increase cruising speed by +20 kmh, which is excellent.
But there is a problem. That is the interference and deformation of Screen's Meter due to wind pressure.
The stopping point of the Bracket isQuantity:Pair (for Left and Right) 1 item each (Co-tightened with Headlight's Stopper Bolt) The bracket is low relative to the screen, so the wind pressure will completely hit the Meter depending on the speed of the wind. Since the supplied rubber is not enough, we attached a 2mm rubber plate. Then, we can see that the Right Side, which does not have the Meter, is deformed by the wind pressure while driving.
I feel that the upper part of the screen needs to be reinforced with a universal bracket or something, but the screen width is narrow, so I would like to carefully determine if a universal bracket can be used.
View detail