Reviews
Supper Grip
I think the cosmetics are good. It is a consumable item, so I think it is inexpensive. View detail
Fits: YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6N, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6
Great
great replacement fits my boom 250cc, you should tottaly get it if u ever break ur brake lever, great item give it a 5 star review View detail
Fits: KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA2 Helmet50RR, KAWASAKI Z250 (2013-), KAWASAKI VERSYS-X 250, KAWASAKI VERSYS-X 250, KAWASAKI NINJA250R
Required for Exhaust pipe replacement
This is required when replacing the PowerBox. It is simply installed with the Liquid Gasket. It does the job well with no leakage of the exhaust Gas. Quantity for spare:I purchased 1 Set of 4pcs. but actually 2 is enough. View detail
Fits: YAMAHA Jog Aprio Type 2, YAMAHA jog sports, YAMAHA Super Jog ZR, YAMAHA BJ, YAMAHA SUPER JOGZ, YAMAHA VINO(2Cycle), YAMAHA YV50 Z II, YAMAHA JOG POCHE, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA CHAMP, YAMAHA AXIS 50, YAMAHA APRIO, YAMAHA APRIO, YAMAHA APRIO, YAMAHA VINO 5AU
Spring in Blue is Sporty
JOG APRIO (SA11J) Attached to
(At the same time, Front shock was overhauled.)
Rear tires touch the road surface depending on the parking location.
Main stand became somewhat unstable.
It was slightly up on the buttocks, but I didn't feel any negatives at all.
NORMAL ratio, the ride quality has been restored to a level comparable to that of NORMAL.
GOOD to be able to adjust Pre-road in steps.
I weigh 56kg and JUST in the weakest position.
Large box in the rear for camping touring with a lot of luggage.
The adjustment comes into play. (with adjustment tool)
View detail
Fit quite well.
GAG's Seat has a slightly different shape, but it's more than I expected.
Fit.
However, the installation is quite large and strange, as it requires a lot of pulling, fixing, and so on.
Be careful, because if you are not careful, it will wrinkle and you will have to redo it.
View detail
Low price with the same quality as OEM Product
As per Title. I exchanged it for a neighbor lady's Today.
It's as good quality and affordable as OEM Product, and it's RECOMMENDATION!
View detail
Used in xlr250
The Lever was broken so I replaced it.
It is a little shorter than OEM.
Quantity:Pair (for Left and Right) It is good that it is
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ZR-7/S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZRX400II, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R
Excellent in costa
Used for ESTRELLA as for Repair
Unlike OEM, there is a little wobble, but it is cheap and easy to supplement.
The appearance is almost the same as OEM, and I am satisfied with the excellent cost performance for Repair.
View detail
Fits: SUZUKI LETS II (2Cycle)
I think it's good as a for repair, about a light tune.
LETS II (CA1PA) I thought it was good for NORMAL and light tune.
By the way, my LETS II is Burial's StealthExhaust System DAYTONA's PowerAdviseHigh Speed Pulley Red Box. Surprisingly? I'm not sure if it's a good match with these, but it's contributing to a good amount of speed.
As for durability, I can't say for sure since I haven't driven more than 1,000 km with it yet. I think it will be durable if I break it in a little.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA TY250 S, YAMAHA TY250 S, YAMAHA TY250 R, YAMAHA TW200 E, YAMAHA TW200
As Spare.
OEM compatible product.
I got carried away and broke my lever while running Dirt, so I replaced it. Just replace the existing lever.
The accuracy is a bit poor.
It works fine, but I feel like the screw holes are gapping…
good point
We can get it faster than OEM.
The installation itself is easy.
The quality of aluminum is not bad.
Brake operation is the same as OEM.
A bad point
The screw holes are slightly gapped.
I'm a little short of taking BALI.
If you look at the accuracy and other details, there is no Drill, but it is totally perfect for everyday use and is Large sturdy.
It is often difficult to get OEM parts for TWs and other models because they are out of print.
Recommendation, as it is relatively easy to obtain.
View detail
Fits: HONDA LIVE DIO, HONDA DIO (2Cycle), HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA Giorno, HONDA GYROX, HONDA GYROX, HONDA GYROX, HONDA GYROX, HONDA GYROUP, HONDA TACT, HONDA TACT
new blet drive smooth ride
my old giorno (2T) has poor drive feed so i open the L case i found the belt has old and loose tension so this is best chance to change NEW BELT after change? good After replacing the belt, the drivetrain noise is reduced, the vibration is reduced, and it runs well anyway. I checked the size and bought it. View detail
No problem!
I had to replace it because it was getting hardened.
I think it's a great product at a great price.
View detail
It's cheaper than OEM
It is cheaper than OEM and recommended by Shop, so you can be sure. It is cheaper than OEM and recommended by the shop. View detail
Fits: HONDA XR80, HONDA MTX50/R, HONDA MTX50/R, HONDA CROSSCUB110, HONDA CABINA 90, HONDA CABINA, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR80, HONDA CT110 HUNTER CUBCT110, HONDA TODAY, HONDA NS50F, HONDA MTX80R, HONDA MTX80R
It's a little better than OEM.
It's less expensive than the OEM, and with Slit in the Shoe, it seems to work a little better. I didn't have any problems with the installation either. I'm happy with the product. View detail
Fits: HONDA XR80, HONDA MTX50/R, HONDA MTX50/R, HONDA CROSSCUB110, HONDA CABINA 90, HONDA CABINA, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR80, HONDA CT110 HUNTER CUBCT110, HONDA TODAY, HONDA NS50F, HONDA MTX80R, HONDA MTX80R
I think it's a little better than OEM.
I'm glad I bought these over the OEMs because they are cheaper than the OEMs. I didn't have any problems with the installation either. View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
Reassurance of domestic production
I changed it to LEAD125 at 6,000 km It seems to fall off Also, when the vibration of the Engine becomes large during driving, it is time to replace it
This is a GRONDEMENTMassimo Belt This is a simple packaged item in Vinyl, so it's a GRONDEMENT Massimo Belt It's cheaper than the Belt The product is the same, so it's a good buy
I have used it on various Scooters and it is very accurate Inexpensive belts can increase the engine vibration and break easily It is a very good Belt with no It is recommended It does not include an Instruction Manual, so it is only for those who have knowledge of it It is
View detail
It is the best cospa
Used on the ADDRESS110 (CE47A) Originally it is a cheap product, but this one is cheaper and faster than the OEM, so we bought this one too It's just Sponge It's just Sponge, so I don't think OEM or this one will be any different This kind of product is better than other ones unless the dimensions are different The shipping is fast and cheap, so it's a Recommendation View detail
Fits: YAMAHA Jog ZII, YAMAHA Jog ZII, YAMAHA BJ, YAMAHA Jog ZR
soft
Just grab it with both hands and shrink it to close to the main line
With BearingSlider in the old Dio110
Used in conjunction with KN's Sense p-collar
Belt is made from ZOOMER50 and has enough hardness
If you turn it, it will catch on the Torque CamshaftCover a little bit
Polishing BALI with Water-resistance Paper
No reduction in maximum speed due to the impact of SenseP hardness
It's not a fluffy gearshift because it's assembled by pushing it in
A neat finish
There is no feeling of extreme hardness loss after a while of assembly
I didn't have a SenseP that I was happy with the combination
I could use the Bearslayer that I had removed
I'm satisfied
View detail