Reviews
Fits: KAWASAKI ZX-10R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-9R, KAWASAKI Z900RS
Gasket
The Slip-on Silencer is a great sounding device. The Slip-on Silencer makes a nice sound. View detail
Consumables.
It has about 20,000 miles on it since the last replacement.
It's not a physical part, but I'm comfortable with this reliable manufacturer.
It's dirtier than I thought it would be and I'm going to replace it every 20,000 miles.
View detail
Price is the name of the game, and it's cheap anyway!
I used to use OEM parts, but the price is a little cheaper, so I used to use ALBA's I bought the Filter
The installation was in good shape and straightforwardly installed without any problems
I will use it from now on and see how it looks when it is serviced because it is not visible with the cover on
View detail
OEM same etc.
Used for KSR2
There's no particular adjustment feature, and it's cheaper than the OEMs
I bought it Accuracy, etc., would be the same as OEM
It's not particularly surprisingly good or bad
Cosmo
View detail
Fits: YAMAHA XJR1300
OEM Standard substitute item
XJR1300 / It is equipped with RP 03J.
Color BALI We also attracted abundant Foldable,
It compromises there for the convenience of the price..
Although it was decided to buy unavoidably from falling damage,
Quantity : Pair (for Left and Right) If it is inexpensive,
As an alternative to OEM,
I think that it is worthy enough.
With a hopeful price range,
If you can have color BALI,
Customer demand may also grow.
View detail
Although it can be mounted on CB 223S, it is necessary to widen the hole of the movable shaft a little
Brake side is so so, Clutch side feel uncomfortable during operation.
When installing the Clutch lever, the hole in the moving part was tight, so it was necessary to widen a bit with Leutor and round bar file.
Details are here → "Our CB 223" http : / / cb223s. web. fc2. com /
View detail
No problem without OEM.
As Oil is applied, as soon as the item arrives, it is convenient to be able to attach to the car body. After cleaning 5000 kilometers, I washed it, but it was not so dirty. Then, it was reinstalled to the car body again. At that time, the Sponge's Largeness before and after washing swelled more than before, and you had to wear a Sponge that would protrude with your fingers and took a bit of time.
However, as it swelled, I thought that the gap into which dust enters will be reduced, and I made an evaluation 4. Together Quantity : 2pc. Because I am buying Set, it seems to be useful for the time being.
View detail
Fits: HONDA JAZZ, HONDA LEAD 50, HONDA LEAD 50, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA gyro X, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA Benly CD90, HONDA Z50 JZ3|3L|JB3|JC6|JB-LB Type 2, HONDA Z50 JZ3|3L|JB3|JC6|JB-LB Type 1
ALBAALBA Lever
I installed it on AF 27 type SUPER DIO. The immovable car is Large mortar, Lever is bent. This DIO was also bent. So it's an exchange. Brand did not pay particular attention, but could be installed without problems View detail
I installed it in CJ 41A
CJ41ASkyWave (burgman) It attached to. Originally attached Lever was not changed. I tried to replace it because it was bent at. ALBA's Lever is cheap and it's reasonably accurate so you can install it without problems. The surface is also beautiful and those who want to replace scratches or bent Lever are recommended. View detail
Pons attachment can be carried out only by removing even a Bolt nut.Probably, it just called it the engine performance as expected. Isn't the pure place obtained more simply a Merit?
Pons attachment can be carried out only by removing even a Bolt nut.Probably, it just called it the engine performance as
expected.
Isn't the pure place obtained more simply a Merit?
View detail
It is used abundantly by Classic-Bike maintenance. although it is fairly soft touch compared with the Hose of a Manufacturer besides -- is pleasing and I use. That much, since it is easy to escape from a carburetor or
It is used abundantly by Classic-Bike maintenance.
although it is fairly soft touch compared with the Hose of a Manufacturer besides
-- is pleasing and I use.
That much, since it is easy to escape from a carburetor or a Cook, it is also easy at the time of maintenance, and it is also cautions during the
run.
The
Hose clip is indispensable.
It is since I am thinking as important the direction which is easy to extract at the time of maintenance...
View detail
Fits: YAMAHA DT50, YAMAHA AXIS 90, YAMAHA AXIS 90, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA YZ80, YAMAHA DT80 MXS 81-87 for Rear, YAMAHA DT80 MXS 81-87 for Front, YAMAHA TT-R90, YAMAHA SEROW225, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW125, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200E, YAMAHA TT-R125LW, YAMAHA TW200
It is effective to the extent that the Front lock also of the low cost will be carried out, if a strike comes out exactly. Effectiveness is well satisfied very much from an original manufacturer's product rather.
It is effective to the extent that the Front lock also of the low cost will be carried out, if a strike comes out exactly.
Effectiveness is well satisfied very much from an original manufacturer's product rather.
View detail
It used for the first moped to exchange Air filters. It is [ not too bad ] an attachment success without difficulty. If you dare to say, I will want you to indicate finishing [ an Oil application ] into a bag hugely. It was unclear for the
It used for the first moped to exchange Air filters.
It is [ not too bad ] an attachment success without difficulty.
If you dare to say, I will want you to indicate finishing [ an Oil application ] into a bag hugely.
It was unclear for the
beginners in whether it is applied.
View detail
It attached for CB400SF. Since it turned also at the Lever and there was also a crack when a former Owner fell over, it exchanged. Since structure is also good and it is cheap even if it compares that it is pure, it is recommended. It is with the Adjus
It attached for CB400SF. Since it turned also at the Lever and there was also a crack when a former Owner fell over, it exchanged. Since structure is also good and it is cheap even if it compares that it is pure, it is recommended. It is with the Adjuster of a grip of a Brake and this is also a good place. Since it is not a Dress-up up but replacement parts, it is comparatively cheap and recommended at how to say. View detail
The product is good, fit perfect obviously, much better than the old one I was using in the scooter. The size of the old one was smaller than the original.The problem was I have to pay import taxes when my order came. I pay about U$ 30 of taxes... I bough
The product is good, fit perfect obviously, much better than the old one I was using in the scooter. The size of the old one was smaller than the original.The problem was I have to pay import taxes when my order came. I pay about U$ 30 of taxes... I bought together the Split Fire Spark Plug.Sorry, my english is bad. In general, the response of the scooter was improved. Acceleration, the fuel consume, I not tested right, but I think the final speed came faster now. I think the plug cord made the difference, really works, nothing sensational, but works very good. View detail
since it was running about 10,000 K -- air filter exchange of a today -- it carried out. I feel that that it can blow going up became good from exchange before. Since exchange only removes several screws with a driver, Ho, beginners, can also exch
since it was running about 10,000 K -- air filter exchange of a today -- it carried out.
I feel that that it can blow going up became good from exchange before.
Since exchange only removes several screws with a driver, Ho, beginners, can also exchange it easily.
Since a price is also about 2000 yen, the direction which is over 10,000 K from the last exchange is [buying it].
View detail
Since it stood and the lever had been bent by GOKE, he thought that he would make it pure, but with CHOTSU, since it was high, the lever of the alba was used. If it sees individually, I will think also here that he is Ali. I think that I will make
Since it stood and the lever had been bent by GOKE, he thought that he would make it pure, but with CHOTSU, since it was high, the lever of the alba was used.
If it sees individually, I will think also here that he is Ali.
I think that I will make it an alba also when changing shortly.
Although do not bend, it does not break or there are seldom preparations .....
View detail