Reviews
Fits: Others
ALBA Off Car Mirror
Mirror blur while driving is so bad that you can't see HADRILL.
It's acceptable, if you think about it in terms of Cost.
View detail
Fits: HONDA livudio, HONDA livudio, SUZUKI Verde., SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, HONDA baton, YAMAHA TZR50, YAMAHA TZR50
There was neither possibility nor impossibility, and it was enough for the test run for now
There are cheap but cheaper ones for cheap
If it says that it is something like this with Power Filter it seems so, but if it got wet it could not be used for a week
I felt clogged and let me dry out and seeing inside the gold net rusted and it was rash
View detail
Cooling performance below OEM fans
CYGNUS XFOR JAPAN MODEL 4 type (SEA5J) It attached to
Only Exhaust System and Meter exchange, Others is NORMAL
Because of the placement of Exhaust, engine temperature exceeded 120 ℃ in summer, so I exchanged
First of all, as for the installation Body is so soft that Driveretc. It is better to stop biting and fixing
Is it PVC, the material is cheap impression
There is no Instruction Manual etc, but it is not difficult.
The problem is cooling performance
Before replacing Takegawa's LCDMeter the engine temperature ranged from 110 to 125 ° C (Midsummer day) , Whereas after replacement it was 120 to 135 ° C (Somewhat cool day) It has risen to
I returned to OEM by haste, the engine temperature has now been maintained at around 110 ° C
It is a Large lie that boosts air volume
For the purpose of strengthening the cooling it would be better to quit this fan
View detail
Do you adapt it? - - -
Mounting on Clutch side of W 650.
The hole to put in the Color is a little Large, I got out of the spoop and it was a bit painful to install.
Despite having Color, it is rattling back and forth and it is a little annoying when driving ^ ^;
I am thankful that the price is cheap because it is a Universal Product, so it may be as good as loading it as an emergency for LongTwo.
View detail
Installed on LIVE DIOS AF 34
Both Front and Rear are scarcely replacing their products as they have little remaining quantity Quantity : 2pc. Purchase Set.
Rear side installed without any problem Installation completed.
Front side is ... That? S not it ... it does not enter?
It seems that the outer diameter is too large and it is impossible to dock with Front wheel.
Brake I was not grasping and the adjustment Bolt was loosened, but it did not enter at all.
For the time being, Front side gave up for the time being, and when it decreases on the Rear side, it finishes the work by inserting it into the Front.
I do not know whether it is a car body problem or a product problem, but Front - Because it was a notation with for Rear, too bad I purchase it.
Those who are planning to replace please note once.
I think that there is no particular problem in terms of performance.
View detail
Fits: HONDA CB400FOUR (water-cooled), HONDA CB400FOUR (water-cooled), HONDA CB400FOUR (water-cooled), HONDA VTR250, HONDA VTR250, HONDA VTZ250, HONDA VTZ250, HONDA VTZ250, HONDA NSR250SE, HONDA NSR250SE, HONDA VTZ250, HONDA NSR250SE, HONDA VFR400R, HONDA NSR250SE, HONDA JADE, HONDA CBR250R (MC17/19), HONDA CBR250F, HONDA CBR250F, HONDA VTR250, HONDA X4
It looks dirty
Plating quality is bad, or where there are steps, things that White do not know well are attached. You can get it by rubbing with Brass Brush, but what is attached?
Although the price is cheap, KL 250 Sherpa is the price at which you can get a change by buying an OEM Brake lever. We want quality control to be solid. I thought I would not buy it next time.
View detail
Fits: HONDA livudio, HONDA livudio, SUZUKI Verde., SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, HONDA baton, YAMAHA TZR50, YAMAHA TZR50
The LETS II was equipped and it stopped inhaling air at all by the oil of return [ blow ] of a carburetor to 50 km of formed runs.It is for a garbage can immediately.With four strikes, I think that it can use.
The LETS II was equipped and it stopped inhaling air at all by the oil of return [ blow ] of a carburetor to 50 km of formed runs.It is for a garbage can immediately.With four strikes, I think that it can use. View detail
The eye of the Sponge was too finer than having expected. Since it is general-purpose Type, I think that various vehicle types are choked, but eyes consider to thin research submersible 'Kaiyou' just for a moment. It is worried in this tha
The eye of the Sponge was too finer than having expected.
Since it is
general-purpose Type, I think that various vehicle types are choked, but eyes consider to thin research submersible 'Kaiyou' just for a moment.
It is worried in this that inhalation may worsen than the Air filter of an original manufacturer's product.
They are goods of the
price.
Although the
price is somewhat high, we recommend you the Turbo filter of a DAYTONA, and the Power filter of KN plan.
View detail
Fits: HONDA XR400R, HONDA GB250 Clubman, HONDA CB400SS, KAWASAKI KLX300R, HONDA XR400, HONDA CL400, HONDA FTR250, HONDA GB400, HONDA XL250, HONDA XR250, HONDA XR250, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX300R, KAWASAKI KLX250, KAWASAKI KLX110, KAWASAKI KL250, KAWASAKI Eliminator 125, HONDA XR650, HONDA XR650
It has equipped ordinarily satisfactorily. Since it just still equipped, a quality side is no comment. It seems that a size differs from an original manufacturer's product delicately although it is a fine point. In KSR110, if a Filter is attached to th
It has equipped ordinarily satisfactorily. Since it just still equipped, a quality side is no comment. It seems that a size differs from an original manufacturer's product delicately although it is a fine point. In KSR110, if a Filter is attached to the oil outlet of a Crankcase in the case of an original manufacturer's product, it will be held and will not fall, but in the case of the Filter here, it falls so that the magnanimity of a Rubber packing may be loose. In my case, the Rubber packing here was removed and reused from the old original manufacturer's product, and it made magnanimity equivalent pure. From next time, an original manufacturer's product is used again. View detail
Fits: HONDA NSR250R, HONDA CBR750, HONDA NSR250SP, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SE, HONDA GB250 CLUBMAN, HONDA NSR250SE, HONDA JADE, HONDA CBR750, HONDA NV400, HONDA NV400, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTZ250, HONDA NSR250SP, HONDA VTZ250, HONDA VTZ250, HONDA NSR250SP
The Clutch side was able to use. right-hand side forgot for an authentic positive one to have an Adjuster. right was not able to be used. It is if it does not fall and damage although it incidentally uses for the right of PCX (smile).
The Clutch side was able to use.
right-hand side forgot for an authentic positive one to have an Adjuster.
right was not able to be used.
It is if it does not fall and damage although it incidentally uses for the right of PCX (smile).
View detail
Fits: KAWASAKI ZR400, KAWASAKI Eliminator 400, YAMAHA FZR1000, YAMAHA FZ750, YAMAHA FJ1200, YAMAHA FJ1100, KAWASAKI ZX-4
He thought that it was large if a box is opened instantly and an O ring is seen since it flew at the Sale this time, ALBA was purchased for the first time and replacement time came although the Filter of the DAYTONA was used to last time, and it did not s
He thought that it was large if a box is opened instantly and an O ring is seen since it flew at the Sale this time, ALBA was purchased for the first time and replacement time came although the Filter of the DAYTONA was used to last time, and it did not suit actually setting satisfactorily greatly. Since it was unavoidable, it cut and attached. I want a description, also although it is called Sale goods how much! View detail
Fits: SUZUKI DR250S, SUZUKI GN250E, SUZUKI volty, SUZUKI volty, SUZUKI volty, SUZUKI volty, SUZUKI volty, SUZUKI DR250R, SUZUKI volty, SUZUKI ST250, SUZUKI DR-Z250, SUZUKI DR400, SUZUKI SW-1, SUZUKI NZ250, SUZUKI Marauder 250 (GZ250), SUZUKI Intruder 250, SUZUKI Goose 350, SUZUKI Goose 250, SUZUKI GN400E, SUZUKI DR350
When changing the oil by a GOOSE250, it tried to use. Since it was written as GOOSE250 correspondence. Although in play [ of the direction besides ] was seen and purchased, the big O ring which surely is attached to a Cap (Cover) of an Oil fil
When changing the oil by a GOOSE250, it tried to use.
Since it was written as GOOSE250 correspondence.
Although in play [ of the direction besides
] was seen and purchased, the big O ring which surely is attached to a Cap (Cover) of an Oil filter is attached, and the point will be inexpensive.
A Cover is not closed, however it may put in power strongly when time tends to exchange for
if compelled.
If it often looks at, compared with the Oil filter currently attached before exchange, and the Oil filter of VESRAH currently prepared one more, it is a little thick.
It is a thing [ like ] in which a Cover is not closed in the cause.
The
back side has a small O ring pinched between a Filter and an Oil discharge mouth, and a Cover may be closed if it is removed.
However, it does not seem to remove, since an Oil will bypass a Filter from a crevice if the O ring is removed at all.
Since the Filter of
VESRAH was also prepared, the oil change was able to be cleared up somehow.
However, when it was only a Filter of ALBA, work was stopped there.
A Filter with this thickness may also be able to use from other vehicle types.
It may be OK one if it is a GOOSE350.
However, it was not able to use in the GOOSE250 which I have at least.
Since it has written what cannot be used can use and has been troubled, evaluation only has making it low --
I am just going to want you to check with my once.
If it is vehicle types other than a GOOSE250, probably it will be satisfactory.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA CUB etc., HONDA LIVE DIO, HONDA SMART DIO, HONDA TACT, HONDA MONKEY
The moped which we have bought with individual dealing was reached. I think that this product has various opinions -- it does not take and dress, but if it attaches, it will become pop touch and a still more characteristic feeling of mischief will dri
The moped which we have bought with individual dealing was reached.
I think that this product has various opinions -- it does not take and dress, but if it attaches, it will become pop touch and a still more characteristic feeling of mischief will drift.
Although I regard a chaly, tact, etc. as adapting oneself to a older moped, it will not turn out well that it attaches to new ZR etc.
Honesty of visibility is not good.
As safety related parts, they are 3 styles.
Moreover, it is very well easy to rust.
View detail
Fits: HONDA AX-1, HONDA CB750, HONDA X11, HONDA X4, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR900RRFire blade, HONDA CBR929RRFire blade, HONDA CBR954RRFire blade, HONDA NIGHTHAWK750, HONDA VRX400 R100 ROADSTER, HONDA XL-DEGREE, HONDA XL400VTRANSALP, HONDA SHADOW400
There was no problem in particular similarly pure [ quality ]. I am not a number odd ten pieces. Since expectation is put as supposing this voice reaches Mr. Manufacturer and there is a statement of an adaptation vehicle type, don't I have it used ent
There was no problem in particular similarly pure [ quality ].
I am not a number odd ten pieces. Since expectation is put as supposing this voice reaches Mr. Manufacturer and there is a statement of an adaptation vehicle type, don't I have it used entering eight piece or to enter 12 piece?
View detail
Fits: HONDA XR100 Motard
It attached to XR100 motard. It is attached although form is different in it being pure. However, die length is slightly short. Only three fingers start as it understands with a photograph. For the reason, a clutch feels it heavy. If i
It attached to XR100 motard.
It is attached although form is different in it being pure.
However, die length is slightly short.
Only three fingers start as it understands with a photograph.
For the reason, a clutch feels it heavy.
If it thinks as a reserve when something is, I will think that it is good.
It is not so expensive.
View detail
Fits: YAMAHA Majesty 125
Since the contacting parts of the stop lamp sensor of a front brake lever are worn out and the stop lamp also turned on idling, it exchanged for right-and-left coincidence on the occasion. Since there was also no prejudice called especially Colet ! fo
Since the contacting parts of the stop lamp sensor of a front brake lever are worn out and the stop lamp also turned on idling, it exchanged for right-and-left coincidence on the occasion.
Since there was also no prejudice called especially Colet ! for the moment, when it searched by normal and the engine performance like equivalent, since this lever set was cheap, it purchased here.
As a lever, it is almost the same as normal.
However, the stopper of simple parking which takes the side of a rear brake lever was not a smooth motion like [ a motion is astringent and ] normal.
Is it touch of [ carry out grease up and / very ] or?
Since he is seldom using it usually, if it is considered as the function, he will think satisfactory kana, but I think that it changes here by people.
View detail