Reviews
Cheaper than OEM
Since it is not a fixed part but a consumable part, I decided to purchase a cheaper one.
And the fact that it was a WeBig special order was Plus.
View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
Repeat
Quantity in the previous vehicle:2pc, this is the first pc in a newly purchased vehicle.
The last two replacements were used for 10,000 km and 13,000 km respectively, and they did not malfunction or break, making them a safe repeat purchase.
As the product description says, it is compatible with High Speed Pulley. Is it a little Long?
I am using it on my PCX125 engine in combination with a DAYTONAHigh Speed Pulley and a KITACO Power Drive Kit Type X. I have not had any problems.
As the product description says, it is compatible with High Speed Pulley.
View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
Reinforcement Type?Does it really make a difference? → Results
[How is it used?
In use.
PCX125 (JF28) I replaced the drivetrain on the suspension of the The DriveV Belt that I had originally put on felt like it was slipping somewhat. It had about 5000km on it since I last checked it. When I opened it up, the old one already had a crack in the valley and was already at the end of its life. Was it a little too late?
Was the one you received as per Image?
I liked Parenthesis better than Image because it was kind of, well, fibrous.
I was under the impression that I received a very good product for the price.
The side angles are totally different when compared to the OEM Drive belt.
The angle is much closer to vertical on this product. This product is much closer to vertical angle. I think so.
Was the installation difficult?
I thought it needed a little more Power to install than the OEM one.
I'm not sure if it's because it's new or not, but I'd suggest doing some preliminary research on youtube on how to do things with Tie Wraps before you go to work on it.
The first time I opened the Crankcase, I had a hard time getting it off. If you are going to do this, please use a T-type Box Wrench before you start. (I think it was 8mm) and Rubber hammer are recommended to be prepared.
How was your experience with it?
It has been driven about 100 km.
To be honest, I thought it wouldn't change that much even though it was a reinforced V-Type. Immediately after the replacement, it feels like there is no change.
But after about 10k miles it started to feel right, and it was clearly quicker and more fun at lower speeds. Maybe it's because it's new, but well, that's it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None! Satisfied!
View detail
Fits: SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS4
High Speed Pulley compatible
I replaced it at the same time when I installed the High Speed Pulley Kit.
After 12 years and over 8,000 miles of use, the OEMs still seemed to work, but I chose to go with the reinforced version because I drive over 60 miles every day to work.
There is no visible effect when installed, but the price is cheap and good.
I will have to run it to see how durable it is, but I'm hoping for the best.
View detail
Fits: SUZUKI zzz, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Address 110, SUZUKI Address 110, SUZUKI Let's 5, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 4
I'm happy with the costumer!
I used it on my ADDRESS110, and after 3,000km, I checked it, and there was a little bit of wear and tear I think it is acceptable The price is low enough View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY, HONDA Giorno, HONDA DIO, HONDA LIVE DIO
Installation is fine
We will test the performance and durability in the future
The OEM is 13g, so I bought 10g and planned to use half of it, but the OEM rollers got worn out and hand (of a clock)
I used all of them because they were no longer circular and I couldn't use them
Will the acceleration be better and the top speed drop off?
The picture is an OEM with discolored wear, how can it wear this much with 4000km on the odometer?
Looking at the wear and tear, I'm guessing it still needs some Grease
View detail
Fits: SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS4
Surprisingly Large Off. Change Drive belt
Downs of Drive belt slowly progressing and I think that it is hard to notice.
However, since it is a part that reliably affects the running performance, let's check when removing the surrounding Parts
View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA Giorno, HONDA DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY
It is perfect for trying
Weight Roller is a consumable item, and if it is set up, there is almost nothing to use next unless it runs, but if I ran as normal as 200 m, I was cutting a little.
Is it soft or is it compatible with Pulley?
View detail
Fits: SUZUKI zzz, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Address 110, SUZUKI Address 110, SUZUKI Let's 5, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 4
ALBA Weight Roller
excellent weight roller and good price, great combination! lets see if they last enough to buy another set! good for improving low acceleration! View detail
Fits: YAMAHA Apprio, YAMAHA Jog Aprio Type 2, YAMAHA Jog Aprio Type 2
Sakka's founder Vino was restored for 15 years. The inside of the Crankcase was also washed and the Slide piece, the Weight roller, the V belt, and the Gasket were exchanged. Although it is cheaper than the original manufacturer's product, it ca
Sakka's founder Vino was restored for 15 years.
The inside of the
Crankcase was also washed and the Slide piece, the Weight roller, the V belt, and the Gasket were exchanged.
Although it is cheaper than the
original manufacturer's product, it can be used satisfactorily.
View detail
Fits: YAMAHA Apprio, YAMAHA Jog Aprio Type 2, YAMAHA Jog Aprio Type 2
[Webike Monitor] It purchased, although exchanged simultaneously with the Belt. It is easily exchangeable, and since a price is also cheap, I think whether it is good for a simple and convenient Light tune.
[Webike Monitor] It purchased, although exchanged simultaneously with the
Belt.
It is easily exchangeable, and since a price is also cheap, I think whether it is good for a simple and convenient Light tune.
View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA Giorno, HONDA DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY
[Webike Monitor] It purchased to the drive-system Setting of the Scooter. Attachment was also one-shot OK, without structure being bad especially although I thought that it was quite cheap. I think whether it is satisfactory even if it ex
[Webike Monitor] It purchased to the drive-system Setting of the
Scooter.
Attachment was also one-shot OK, without structure being bad especially although I thought that it was quite cheap.
I think whether it is satisfactory even if it exchanges frequently, if it is this price although it does not understand yet about
durability.
View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA Giorno, HONDA DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY
Since it was cheap anyhow, it purchased for setting to today AF61. Six pieces enter, we come out and this price is recommended. since the price is cheap, there is slight uneasiness in durability, but it is [ place which is Kon ] satisfactory -- it
Since it was cheap anyhow, it purchased for setting to today AF61.
Six pieces enter, we come out and this price is recommended.
since the price is cheap, there is slight uneasiness in durability, but it is [ place which is Kon ] satisfactory -- it is .
I think that it is worth purchasing to a trial for the time being.
View detail
It attached to sepia. The maximum high speed increased by about 5 K. It is recommended if you would like for a price to be also handy and to lengthen the maximum high speed simply. A specialized tool is needed for removal. If it carries ou
It attached to sepia.
The maximum high speed increased by about 5 K.
It is recommended if you would like for a price to be also handy and to lengthen the maximum high speed simply.
A specialized tool is needed for removal.
If it carries out with a power tool by the deep socket of 17, it will separate simply.
Unlike the jog system, since the suzuki was the first, it purchased the tool.
Since a pulley face is iron, cautions are required so that the spline of a crankshaft may not be damaged.
Let's ask a motorcycle store for the uneasier one.
View detail