Reviews
Fits: SUZUKI zzz, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Address 110, SUZUKI Address 110, SUZUKI Let's 5, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 4
Quality videos
In Suzyki Lets 2, I installed 3 ALBA rollers of 14.5 g in the variator, instead of the worn ones (which were in the factory configuration). At low speeds, the scooter began to move smoothly, without jerking. During acceleration, the dynamics did not deteriorate. In Suzyki Lets 2, I installed 3 ALBA clips of 14.5 g in the variator, instead of worn out ones (which were factory-made). At low revs, the scooter began to move smoothly, without jerking. When overclocked, the dynamics did not deteriorate. (Translated by Google Translator) View detail
Fits: SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS4
Surprisingly Large Off. Change Drive belt
Downs of Drive belt slowly progressing and I think that it is hard to notice.
However, since it is a part that reliably affects the running performance, let's check when removing the surrounding Parts
View detail
Fits: YAMAHA CYGNUS X
Both performance and Cost performance are very wonderful
I used Massimo 's V Belt for a long time and I am satisfied with the performance. When I tried to purchase V Belt in addition to regular maintenance this time, I found Belt bespoke webike!
Cost performance was good, I thought a bit uneasy at first, but it turned out to be V Belt of Massimo when I looked closely well, it is safe to say that it is cheap, by simplifying Package and reducing cost by ordering Large amount Did. Drive system and Exhaust Systemetc. I think that it is enough for Light tuning vehicles.
If you want to purchase as a reserve of V Belt, Package has been simplified and almost Belt is exposed in the box, so please be careful. (It is the packing of the necessary minimum Small limit. )
In general, I think Belt is recommended for both price and performance. (Vehicle used : CYGNUS X SE44J 2010 MODELFOR JAPAN MODEL use)
View detail
it is not for address fi 115
it's not for address fi 115 ... it doesn't fit ... the electric starter doesn't hit the outer diameter of the drive face eh ... it's not for address fi 115 ... It's not quite measurable ... the electric starter hit the outer diameter of the drive face eh ... (translated by Google Translator) View detail
Fits: SUZUKI zzz, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Address 110, SUZUKI Address 110, SUZUKI Let's 5, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 4
ALBA Weight Roller
ALBA Weight Roller 6 >Videos are good! for a small price-something that is necessary/ already bought them * I recommend to buy the original expensive too ALBA (good replacement) View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY, HONDA Giorno
Trial Ordinary
The Weight Roller is a consumable item and if it doesn't fit, I won't use it next time if it's in the middle of setting up, but it was a little worn out after 200m.
Is it soft? Or is it just the way it is with Pulley?
View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA Giorno, HONDA DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY
trial use
The Weight Roller is a consumable item and if it doesn't fit, I won't use it next time if it's in the middle of setting up, but it was a little worn out after 200m.
Is it soft? Or is it just the way it is with Pulley?
View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA Giorno, HONDA DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY
It is perfect for trying
Weight Roller is a consumable item, and if it is set up, there is almost nothing to use next unless it runs, but if I ran as normal as 200 m, I was cutting a little.
Is it soft or is it compatible with Pulley?
View detail
Fits: YAMAHA Apprio, YAMAHA Jog Aprio Type 2, YAMAHA Jog Aprio Type 2
Engine came to Smooth from bottom to top.
Up to now 6. We used 5 g of Weight Roller, but when we made 3 g this time
Engine is comfortably moving from the bottom to the top, the maximum speed is also up and I am satisfied with the Large change.
I thought that it was excellent in Cost performance.
View detail
Fits: YAMAHA Apprio, YAMAHA Jog Aprio Type 2, YAMAHA Jog Aprio Type 2
Engine came to feel comfortably from bottom to top.
Weight Roller till now is 6. It was 5 g which was bad rushing and the slopes were bad and the fastest was also
Although it was only downhill and so on, 3 g of Weight Roller got accelerated, climbing ability,
The maximum speed has improved and the Engine has also come to feel comfortably from bottom to top.
I am very satisfied with the current use.
View detail
Fits: SUZUKI zzz, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Address 110, SUZUKI Address 110, SUZUKI Let's 5, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 4
ALBA Weight Roller
excellent weight roller and good price, great combination! lets see if they last enough to buy another set! good for improving low acceleration! View detail
Cooling performance below OEM fans
CYGNUS XFOR JAPAN MODEL 4 type (SEA5J) It attached to
Only Exhaust System and Meter exchange, Others is NORMAL
Because of the placement of Exhaust, engine temperature exceeded 120 ℃ in summer, so I exchanged
First of all, as for the installation Body is so soft that Driveretc. It is better to stop biting and fixing
Is it PVC, the material is cheap impression
There is no Instruction Manual etc, but it is not difficult.
The problem is cooling performance
Before replacing Takegawa's LCDMeter the engine temperature ranged from 110 to 125 ° C (Midsummer day) , Whereas after replacement it was 120 to 135 ° C (Somewhat cool day) It has risen to
I returned to OEM by haste, the engine temperature has now been maintained at around 110 ° C
It is a Large lie that boosts air volume
For the purpose of strengthening the cooling it would be better to quit this fan
View detail
Fits: SUZUKI zzz, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Address 110, SUZUKI Address 110, SUZUKI Let's 5, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 4
ALBA Weight Roller
very good quality for the price and it seems to be a great improve with the kitaco variator for zoomer-x. i will buy more of this. View detail
Fits: SUZUKI Address 110, SUZUKI Address 110, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI zzz, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 4, SUZUKI Let's 5
Good Roller
Has got Super Weight Roller. I am very pleased with the purchase, I installed Suzuki Address 110 on my scooter, the difference is visible in comparison with the factory ones, very fast start, which I expected. The quality of the goods at the height, the first purchase was successful, in the future I want to order a lot because the quality of the goods at the height. View detail
Fits: SUZUKI zzz, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Address 110, SUZUKI Address 110, SUZUKI Let's 5, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 4
roller
I bought these rollers are of excellent quality.to replace the old original instead of the twenty Gramovich the old worn-out..remove the acceleration is faster and smoother compared to the worn out like a rag.I recommend, as shown by this Japanese quality speaks for itself.the thing *I Bought this at 14.5 g. of excellent quality.instead of the old original With it acceleration has become faster and smoother compared to the worn out like a rag.Recommend;as it showed a good side-Japanese quality speaks for itself. View detail
Fits: HONDA CREA SCOOPY, HONDA Byte, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO
The direction of rotation is not specified?
It is the first time that Belt does not have instructions on the direction of rotation.
whichever?
Instruction Manual or not quite unkind.
I do not know yet because I just used the performance side ...
View detail
I exchanged it just in case.
I did not do Bore up, but since I installed High Camshaft and BigThrottle, I exchanged it just in case.
There was BALI or I did not think that making was not good. To replace it was a long effort to remove the Screw in a narrow place and to remove the Exhaust System to remove the Cover. Compared with OEM, the direction of the wing of the fan is opposite, so I was worried about inhaling, but I was sucking in. I have not examined how to check the air volume and whether it will cool or not. I do not understand good or bad, but there are only 2 choices "I can recommend you" I am doing it..
View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA Giorno, HONDA DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY
Cospa is okay
Since it was cheap in stock with inventory, I tried it made by ALBA this time.
From the price it is necessary to see how much durability is, but Quantity : 1 Set of 6pcs. So this price is attractive.
View detail
Fits: HONDA Dio (2 Cycles), HONDA Dio (2 Cycles), HONDA Dio (2 Cycles), HONDA Dio (2 Cycles), HONDA Livudio SR, HONDA G-dash, HONDA gyro X, HONDA Gyro UP, HONDA baton, HONDA baton, HONDA baton, HONDA Livdio ZX, HONDA Livdio ZX, HONDA livudio, HONDA Livudio SR, HONDA livudio, HONDA gyro canopy, HONDA gyro canopy
Installed in AF62 DIO
I installed it in the DIO of the AF62 which I bore up using Takegawa's Kit.
Especially processing etc.. Also, it is not necessary.
It was clearly lighter by OEM ratio, I felt Throttle's Response rose.
Also, I wore it in the summer and went to Touring, but there was not a problem with heat, in particular.
View detail
Disappointed with this product, at the first disassembly, with the special key to disassemble the cheek, one of the two holes snapped ... First and last time I chose this brand. Otherwise for the site, very good customer service, very present to help fa
Disappointed with this product, at the first disassembly, with the special key to disassemble the cheek, one of the two holes snapped ... First and last time I chose this brand. Otherwise for the site, very good customer service, very present to help make the best choice for our scooter (HONDA PCX 125 model 2011) I would order again on this site with my eyes closed. Disappointed with this product, the first dismantling, with the special wrench to remove the play, one of two holes snapped ... First and last time I chose this brand. If not in terms of the site, great customer service, very present help to make the best choice for our scooter (Honda PCX 125 model 2011) Will order again on this site eyes closed. View detail