Reviews
![[1 Set of 2pcs.] Oval Mirror 10mm Small](https://img.webike-cdn.net/catalogue/14155/101-041_TS.jpg)
We chose the Small Type to match the Handlebar.
I used to use the so-called Z2Mirror Bracket Type, but it was old and the rust was noticeable, so I replaced it with the Small Type. The small type is a little harder to see. View detail
Fits: HONDA ZOOMER(Ruckus), HONDA CUB etc., HONDA LIVE DIO, HONDA SMART DIO, HONDA TACT, HONDA MONKEY
not adjustable
quality is fine but mirror is not adjustable and is fixed on the stalk. packaged well and will look cool but not sure I'll be able to see out of them. View detail
![Normal Thread Screw Universal 8mm [1 Set Of 2pcs.] Rear Mirror Oval HONDA L/R Set](https://img.webike-cdn.net/catalogue/14155/101-001_TS.jpg)
Fits: HONDA TACT, HONDA DIO, HONDA LIVE DIO, HONDA SMART DIO, HONDA ZOOMER
You can use it.
Installed on SPACY100.
I replaced the one that was on before because it was getting hard to see due to vibration.
The bracket is a bit long, but it is very easy to see and comes with a Rubber Cover to cover the Screws.
Two pieces Quantity:I am satisfied with this price for the set.
View detail
![For Beano [Set Of 2] Rearview Mirror](https://global.webike-cdn.net/photo/impression/74/74b7b7e287b7c1007a0d7220d58091b4L.jpg)
Fits: YAMAHA VINO [Vino]., YAMAHA VINO [Vino].
Back Mirror for ALBA VINO
VINO is active in the anime? Because it was
"Oh? A round Back Mirror would be nice too."
And
The price isn't that high either.
result
It looks good.
It looks good on the round APRIO
I think
View detail
![[Set Of 2] Round Mirror For Dio](https://img.webike-cdn.net/catalogue/14155/101-018_TS.jpg)
Fits: HONDA DIO [Dio]., HONDA CUB [Cub]., HONDA monkey, HONDA DIO [Dio]., HONDA CUB [Cub]., HONDA monkey
Cospa is nice
I've been using it with SUPER CUBSTD without any discomfort although it's labeled for DIO. View detail
OEM same etc.
Used for KSR2
There's no particular adjustment feature, and it's cheaper than the OEMs
I bought it Accuracy, etc., would be the same as OEM
It's not particularly surprisingly good or bad
Cosmo
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA CUB etc., HONDA LIVE DIO, HONDA SMART DIO, HONDA TACT, HONDA MONKEY
Just need this style
As a female man who loves motorcycles, fancy variety is a must! ~ The style of this scissors hand is still the blue I like. It is installed on my monkey, and it can be changed to the wild. I hope that the manufacturer can produce two versions of "rock" and "cloth", as well as a metal rod. It would be better if the body had a black one. As a female man who loves motorcycles, fancy change is a must! ~ This scissors hand style is still my favorite blue, installed on my monkey, you can change the style to wild, is to hope that manufacturers can produce a "stone" and "cloth" two versions, there is a metal rod If the body is black, it is better.(translated by Google Translator) View detail
Fits: YAMAHA XJR1300
OEM Standard substitute item
XJR1300 / It is equipped with RP 03J.
Color BALI We also attracted abundant Foldable,
It compromises there for the convenience of the price..
Although it was decided to buy unavoidably from falling damage,
Quantity : Pair (for Left and Right) If it is inexpensive,
As an alternative to OEM,
I think that it is worthy enough.
With a hopeful price range,
If you can have color BALI,
Customer demand may also grow.
View detail
Although it can be mounted on CB 223S, it is necessary to widen the hole of the movable shaft a little
Brake side is so so, Clutch side feel uncomfortable during operation.
When installing the Clutch lever, the hole in the moving part was tight, so it was necessary to widen a bit with Leutor and round bar file.
Details are here → "Our CB 223" http : / / cb223s. web. fc2. com /
View detail
Fits: HONDA JAZZ, HONDA LEAD 50, HONDA LEAD 50, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA gyro X, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA Benly CD90, HONDA Z50 JZ3|3L|JB3|JC6|JB-LB Type 2, HONDA Z50 JZ3|3L|JB3|JC6|JB-LB Type 1
ALBAALBA Lever
I installed it on AF 27 type SUPER DIO. The immovable car is Large mortar, Lever is bent. This DIO was also bent. So it's an exchange. Brand did not pay particular attention, but could be installed without problems View detail
OEM to LETS 4
Grip of LETS 4 has deteriorated, so we reviewed the exchange. There are not many people using OEM to exchange Grip. I have always used the Other Company Product. Design and price can be chosen freely.
However, this time it was a failure.
In order to use the Other Company Product, I will check Size first, but in the case of LETS 4, "Size is smaller than the usual Size, it is the same as early" There are various rumors on the Net. Because LETS 4 has many VERSION, confirmation is the best in the current car without relying on rumors. Since Left SideGrip can escape relatively easily, we measured the outer diameter of Handlebar directly with Vernier calipers, shifted by 1 cm. 22. 5mm. It is a normal Handle size. If model number UZ 50 K 5 of LETS 4, choose Universal Product with total length 115. So I chose a thing of 1000 yen or less. Left Side got snug, but Right Side was extremely difficult. Reason is Throttle side SEA BASS "absolutely can not escape. It is ThrottleColor with secret strategy that will never make it idle. The image shows it.
It adopts a shape that does not come out to two points inside the Grip. Even if they are scraped off, the entire Grip is provided with a detent projection, and if it is not scraped off all the way, the surface of the Grip becomes uneven.
ALBA 's Grip itself is an ordinary commodity, with no particular praise points, there are no disadvantages. Design itself is similar to the Handlebar Grip of the KN project purchased before, but it was not the same item as observing it in detail.
Grip exchange of LETS 4 is certainly possible with Universal Product, but considering the labor and time to scrape off the Grip color, I think that it is better to buy OEM obediently.
By the way, LETS 4 (UZ 50 K 5, GK 5, and FK 5) Grip's OEM Product Number
57110-32G10-291 Right
It is 57211-32G00-291 Left.
For Brown's Grip, both ends are YAF. LETS 4, order OEM Product with webeki than thinking about unfathomable.
For details of installation
http : / / imp. webike. net / commu / diary / 0117188 /
(Copipe thank you. Please look at.
View detail
I installed it in CJ 41A
CJ41ASkyWave (burgman) It attached to. Originally attached Lever was not changed. I tried to replace it because it was bent at. ALBA's Lever is cheap and it's reasonably accurate so you can install it without problems. The surface is also beautiful and those who want to replace scratches or bent Lever are recommended. View detail
Pons attachment can be carried out only by removing even a Bolt nut.Probably, it just called it the engine performance as expected. Isn't the pure place obtained more simply a Merit?
Pons attachment can be carried out only by removing even a Bolt nut.Probably, it just called it the engine performance as
expected.
Isn't the pure place obtained more simply a Merit?
View detail
It attached for CB400SF. Since it turned also at the Lever and there was also a crack when a former Owner fell over, it exchanged. Since structure is also good and it is cheap even if it compares that it is pure, it is recommended. It is with the Adjus
It attached for CB400SF. Since it turned also at the Lever and there was also a crack when a former Owner fell over, it exchanged. Since structure is also good and it is cheap even if it compares that it is pure, it is recommended. It is with the Adjuster of a grip of a Brake and this is also a good place. Since it is not a Dress-up up but replacement parts, it is comparatively cheap and recommended at how to say. View detail
Since it stood and the lever had been bent by GOKE, he thought that he would make it pure, but with CHOTSU, since it was high, the lever of the alba was used. If it sees individually, I will think also here that he is Ali. I think that I will make
Since it stood and the lever had been bent by GOKE, he thought that he would make it pure, but with CHOTSU, since it was high, the lever of the alba was used.
If it sees individually, I will think also here that he is Ali.
I think that I will make it an alba also when changing shortly.
Although do not bend, it does not break or there are seldom preparations .....
View detail