Reviews
I feel this is enough for Sunday mechanic
[How is it used?
I purchased this product to remove and install the snap ring for the rear master cylinder O/H of my YAMAHA/XJR400R. I chose KITACO because they are relatively inexpensive among various manufacturers.
Was the one you received as per Image?
It was exactly as shown in the Image. It is larger than I expected, so it has some presence in the tool box.
It may be surprisingly troublesome to store the Head section.
How was your experience with it?
I had no problems using it. The only thing I have to say is that the tip seems to be quite fragile, so if you handle it poorly, you may end up chasing it. Also, the Instruction Manual is on the back of the container, so it is hard to dispose of it...
[Points to note]
The tip is a delicate part and can be easily broken if handled roughly, so care should be taken.
How did it compare to other products?
Are the cheap ones still from the same supplier? I looked around and found the same thing.
But even if you buy the expensive ones, they are Sunday mechanic, so they are used less often.
Therefore, we think it is a good idea to use these cheap products with crushing vigor.
View detail
Good texture and easy to use
The price is reasonable, but the texture is good and easy to use.
I used it to replace a plug in a CUB and it is easy to use with no problems whatsoever.
It fits well in my hand and is easy to use, so it's a Recommendation!
View detail
KITACO JET Driver
About quality and texture There are all the tools for setting up pe24 About the feeling of use However, my hands hurt when I tried to use the + driver with my bare hands without wearing gloves Products to buy together all in one product Difficulty of installation It's good to use for setting Cost performance and comparison with other products The price of this product is good and the portability is really good, so I recommend it! About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I needed a simple tool to carry around, but it's a well-made product and it's reasonable price As I mentioned above, my hands can hurt with my bare hands, so I recommend wearing gloves and setting them View detail
cheap
It works fine
It's not much of a turnout, but it can be used for 3Pattern and the price is very reasonable.
Too easy.
I tried to get them in Knipec Fat.
I decided to go with this one because it's more expensive.
I'm satisfied
Recommended items
View detail
Must-have for regular spoke maintenance
Checking and tightening your spokes is important yet frequently neglected. Throw this in your cart and check the spokes before every ride for your safety and the longevity of your wheels.Finally caught these in stock. There is a reason for this demand. It fits any spoke you may have without having to change tips..a great tool for your toolbox. works pretty well and is small enough to keep in your pack.not as good as designated sized spoke tools, but it works and is well built. View detail
KITACO Tappet Adjustment Wrench
I bought it for engine rebuilding work, but it was difficult to fix because I was inexperienced in using it, but it was made for APE100 so it was really comfortable to use I will use it ------------------------------------------------ ---------- I bought it for the engine building, but it was difficult to fix it because it was inexperienced to use, but it was made for the APE100, so I was able to use it very comfortably. I will use it Powered by Google Translator View detail
Matching to APE type Engine.
Please note that the tool does not enter well unless the fixed Wrench part is thin because the curved part of the Locker Arm is approaching the lock nut in the APE 100 series.
Lock nut 2 side width is 8 mm and 9 mm
Adjusting Screw conforms to Minus groove type.
Greedy, square Adjusting ScrewType (CUB etc.) If there is an Attachment that also conforms to 1 pc it is strongest b.
View detail
Fits: HONDA glom, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50 (AA04)
cheap
I purchased to remove Flywheel.
The price was also cheap and could be used satisfactorily without problems.
Performance and saying, accuracy There are no comparison objects because there is no object to compare, but
I do not inconvenience at all.
View detail
If this is used, a Wire can be rolled finely. Since a Wire will however snap if you get carried away too much, a degree is required. Does it go out, if every goods are rolled too much?
If this is used, a Wire can be rolled finely.
Since a Wire will however snap if you get carried away too much, a degree is required.
Does it go out, if every goods are rolled too much?
View detail
Fits: Others CUB ,CB50,MONKEY,GORILLA,APE50,APE100,DREAM50 (AC16/15,AC07),KITACO Ultra head,KITACOAPE series SPLHead
Since the Tappet Noise of the CUB became large and was worrisome, this tool was used for adjustment. Since it is a reliable product made from a KITACO and the product itself is made exactly, user-friendliness is satisfactory. Although it is adjustment i
Since the Tappet Noise of the CUB became large and was worrisome, this tool was used for adjustment. Since it is a reliable product made from a KITACO and the product itself is made exactly, user-friendliness is satisfactory. Although it is adjustment in a somewhat narrow part, it can carry out very easily and is satisfactory. I think that it arranges and is satisfied since it is necessaries as a specialized tool although it does not adjust frequently. View detail
Although it did not understand how I could use in the beginning, it is dramatically convenient if the hang on a way to be used is known. Although Tappet adjustment of before was carried out with the Glasses wrench and the Radio pliers, it became qui
Although it did not understand how I could use in the beginning, it is dramatically convenient if the hang on a way to be used is known.
Although Tappet adjustment of before
was carried out with the Glasses wrench and the Radio pliers, it became quite easy by the favor of this product.
View detail
Although the same product has come out also from POSH, I hear that this one is that it is compact and easy to carry and made in Japan, and it purchases here. Although used for VM26, most carburetors can be adjusted if it has this one. It is a diff
Although the same product has come out also from POSH, I hear that this one is that it is compact and easy to carry and made in Japan, and it purchases here.
Although used for VM26, most carburetors can be adjusted if it has this one.
It is a difficulty which must work worrying about whether screws are licked by being too compact and being hard to put power.
View detail