Reviews
Do it once a year.
[How is it used?
I use it for Wire greaseUp on my Motorcycle.
We try to Grease up at least once a year.
Was the one you received as per Image?
It was just as Image.
However, without the Instruction Manual, I might not have been able to understand how to use it at first.
How was your experience with it?
It works fine, but it is a little difficult to do short Wire, etc.
When wire grease is sprayed vigorously, it overflows through the gaps.
[Points to note]
Not particularly
How did it compare to other products?
I think KITACO was the cheapest, although other manufacturers also offer this product.
I think the usage is the same everywhere, so the rest is preference.
View detail
Torque management of Oil replacement
I used to have Dealer replace the oil, but I decided to purchase it to manage Torque so that I don't make mistakes when I turn it by hand.
The product has a solid weight and is easy to use.
I thought the Torque range could be used for Motorcycle maintenance.
Since I am a beginner, I thought it would be better to have a more detailed Instruction Manual on how to use the Torque wrench. I was wondering if you could give me more details on how to use the Torque wrench, such as how to adjust the Torque value after use, how to use it in a tight space, etc., since it says not to use a joint, etc.
I think the product itself is satisfactory for the price.
View detail
Seat help for out-of-print cars
Since GAG's Clutch Cover Gasket is out of print, this Seat was cut out and processed. The cut out was done with scissors and a cutter, but it is as easy to cut out as a piece of cardboard. The Seat was installed together with liquid packing. Of course, there is no oil leakage. View detail
I feel this is enough for Sunday mechanic
[How is it used?
I purchased this product to remove and install the snap ring for the rear master cylinder O/H of my YAMAHA/XJR400R. I chose KITACO because they are relatively inexpensive among various manufacturers.
Was the one you received as per Image?
It was exactly as shown in the Image. It is larger than I expected, so it has some presence in the tool box.
It may be surprisingly troublesome to store the Head section.
How was your experience with it?
I had no problems using it. The only thing I have to say is that the tip seems to be quite fragile, so if you handle it poorly, you may end up chasing it. Also, the Instruction Manual is on the back of the container, so it is hard to dispose of it...
[Points to note]
The tip is a delicate part and can be easily broken if handled roughly, so care should be taken.
How did it compare to other products?
Are the cheap ones still from the same supplier? I looked around and found the same thing.
But even if you buy the expensive ones, they are Sunday mechanic, so they are used less often.
Therefore, we think it is a good idea to use these cheap products with crushing vigor.
View detail
Very easy to use!
Used for Oil replacement!
The scale is accurate and it has a lid!
I guess you have to buy from a proper manufacturer.
It was the right decision to go with KITACO!
View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX 125
I guess it's worth the good price.
I used to replace springs with a tool I made myself, but it was hard to use, so I bought this. View detail
Used during centrifugal Filter removal of Grom.
Items essential to remove the centrifugal Filter of the Grom.
Without it, the Filter cannot be removed because it is co-rotating.
I am not sure if it is an individual difference or a problem in usage, but I managed to fix the GEAR and it is OK.
It will probably appear only once, but if there is to be a next time, it will probably be when the Clutch is replaced.
I wish it were a little cheaper.
As an aside, I lost the one I had purchased and went in a hurry to a Motorcycle supply store to buy another one.
Please be careful not to lose it because it is small.
View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
KITACO after all
When I first bought a cheap one for about 2000 yen, the shaft was off and the tool wouldn't fit. This one is a little more expensive, but it fits easily and I regretted that I should have bought this one from the beginning. View detail
ข้อต่อคุภาพดีสวยงาม ใช้งานง่าย View detail
I can't use it for the slipped Clutch, though.
Cannot be fixed with Clutch that has started to slip.
When loosening the machine, I turned it with Impact.
If it's new and properly assembled, it will hold it firmly in place.
If it's not assembled right, it won't lock, so fix it in place to make sure.
Nut tightening check, I think it's good.
View detail
Buy with Ratchet wrench
Purchased for portable use. I think it is sufficient in terms of content and texture. View detail
I'd like to have one.
I usually do Custom and Maintenance at home, and up until now, I have been tightening by hand lux in almost all areas.
However, as I purchased and read the Service Manual for my car, I wanted to thoroughly tighten the Torque as described in various parts of the manual.
After receiving it, I re-tightened the areas that I had previously tightened by hand with the Torque wrench, and was immersed in the feeling of a tight fit, which increased my satisfaction with my purchase.
Do-it-yourself work is basically your own responsibility. That is why we want to enjoy motorcycle life safely by tightening the parts that can be done.
View detail
Easier than buying OEM Parts?
Quantity rather than buying OEM Parts:1 Set of 10pcs. of this product may be useful in your tool box.
This time it was a little long and I should have cut the tip off, but it seemed to have no effect, so I rounded it off and used it (laughs).
View detail
Good texture and easy to use
The price is reasonable, but the texture is good and easy to use.
I used it to replace a plug in a CUB and it is easy to use with no problems whatsoever.
It fits well in my hand and is easy to use, so it's a Recommendation!
View detail
Good feeling
I'm glad I was able to reuse the OEMSeat, even though it's pointless to use the wasted hole, but since I'm removing the OEMRubber from the Seat, it would have been nice to be able to attach the Rubber to the wasted hole anyway. View detail
KITACO JET Driver
About quality and texture There are all the tools for setting up pe24 About the feeling of use However, my hands hurt when I tried to use the + driver with my bare hands without wearing gloves Products to buy together all in one product Difficulty of installation It's good to use for setting Cost performance and comparison with other products The price of this product is good and the portability is really good, so I recommend it! About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I needed a simple tool to carry around, but it's a well-made product and it's reasonable price As I mentioned above, my hands can hurt with my bare hands, so I recommend wearing gloves and setting them View detail
KITACO Gear Holder
About quality and texture The packaging is excellent and has a reliable quality About the feeling of use It hasn't been used yet Purchase to use when changing ENG crankshaft Products to buy together kitaco Engine Special Tools Difficulty of installation This product makes the work easier Cost performance and comparison with other products I'm not sure about other products, but as it appears in many ape100 engine overhaul videos, it's essential when assembling an engine About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing It was a little difficult to tighten the bolt last year because the engine was disassembled and there was no tool I'm thinking of replacing the crankshaft this winter, so I'm buying this product View detail
cheap
It works fine
It's not much of a turnout, but it can be used for 3Pattern and the price is very reasonable.
Too easy.
I tried to get them in Knipec Fat.
I decided to go with this one because it's more expensive.
I'm satisfied
Recommended items
View detail
Good for the price
After plenty of adjusting it seems to be within tolerances. I tested it against a digital torque wrench to see how close it is. After numerous adjustments and tests it seems to be okay. My things aren't going to the moon so I. can sacrifice a little accuracy. Don't like the lock screw on the bottom though.This is exactly what I needed, I have used it several times and it has performed perfectly every time Just did a full rebuild and this was the perfect piece to have. You definitely need to make sure your bolts are to spec. View detail