Reviews
Works good
Looks awesome, didn't work with the Kitaco neo, it makes it too close to the fender and it hit the cooler, I recomend the high mount for this, the rubber bushings also don't last very long, they are too small, View detail
Fits: YAMAHA TZR50, YAMAHA TZM50
Variation rich
I arrived at this when I was looking for a Thermo Sensor in the size of the Thermo Sensor I wanted to use.
18mm is a little thin. And it's expensive! It's helpful that there are many Variations, but it would have been nice to have another Rank thicker one!
View detail
Effective
I asked the shop to install Oil cooler, High compression Piston, Clutch cover, High Camshaft Type1, and iMAP. If you want to increase the power of the 125, I think you will be satisfied. View detail
A must-have for circuit driving
The bracket is designed to fit the OEM Center up muffler, so the bracket is designed to fit on the Right Side, but in the case of Down Type Exhaust System, it may not fit on the Right Side. Bracket is for Right Side, so if you put it on the Left Side, it will be a cowl.
If you want to wear it on the Left Side, you will need to modify the bracket.
Even if you get to the Right Side, the position of the oil cooler is very delicate, and the front fork may hit the front at full stroke.
View detail
Fits: YAMAHA RZ50, YAMAHA TZR50, YAMAHA R1-Z, YAMAHA FZ250, SUZUKI RG50γ, YAMAHA DT50, SUZUKI RG50, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI GPZ400R
Choose the right size!
It was installed on Yamaha's YZF-R25.
But the water temperature came to rise because the Size is not enough to secure the flow rate.
I am not certain whether Size is the cause, but probably because water came to blow in the summer after I put this on, Size was Small.
I had no choice but to remove it for a size exchange.
The product itself is the same as other manufacturer's products, so you should try to find a size and shape that fits.
In case you're wondering, I reattached a 22mm to the R25.
View detail
Used for 12VMONKEY
I was going to use it on my 70Head but when I saw the product I used it on another car model.
This product should not be used with the 6V series Bear WITHOUT RingCam Head.
There is no protrusion to hold the Cam in place.
I don't think it's going to break right away, but imagine what happens when the Cam's uncontrollable.
I honestly don't know why you're making it 6v capable, just Gasket?
Also, the Oil nipple is 6mm, so I changed it to 8mm for my use.
View detail
Cool!
I changed from the Bolt with Oil cooler of KITACO
This is the same manufacturer, so fitting is not a problem at all and there is no oil blotting Even if you tighten it with Spanner, the surface is not damaged It turned out beautifully
The color balance of the entire vehicle includes these small part color variations I'm glad that
Quantity:I'd like to see a line up of 1 Set of 2pcs I did
View detail
If the Screw part is a little longer
If the Screw part is a little longer, the protrusion of the Screw part is 6mm in between Banjo and me It was about the same level, but a little longer would have been perfect It was even better if it was in a different color View detail
Required for Vertical Type
The temperature sensor attached to the Engine's drain bolt is the only one that can be used I can't check it, but I'm glad I installed it because it's dropping about 5°C. Right It is Side installation, but Fork sinks too much by Front fork maintenance, and Brake It may have interfered with the hose, or some of the fins have been crushed, so be careful View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 100, HONDA APE 100 TypeD, HONDA APE TypeD
The largest capacity for APE
The temperature sensor attached to the drain bolt of the Engine But I think it was a good idea to put it on because the temperature is lowered by about 5 degrees Since the capacity is large, Clearance with SP Takekawa Exhaust System is not good It's a 10mm or so Oil cooler with less capacity than this, and less effective... Option is fine So having the Cooler Guard would have been better View detail
The product itself is fine
I purchased Super oil cooler kit for APE from KITACO, but it is not a good idea to use Engine side Union bolts were not included, so I went out of my way to buy them The Super oil cooler kit for the NSF100 that I bought earlier came with it, so I guess I was wrong for assuming it was attached.. View detail
This very nice quality oil cooler kit. Fitment is perfect as usual with Kitaco brand. Everything is already included for install. The design of the bracket is very nice as it has rubber bushings so that the bracket will not break due to engine vibration.
This very nice quality oil cooler kit. Fitment is perfect as usual with Kitaco brand. Everything is already included for install. The design of the bracket is very nice as it has rubber bushings so that the bracket will not break due to engine vibration. The engine will run considerably cooler and have less heatsoak. The only minus would be the clamps that included. View detail
Fits: HONDA NSR250R
Used to install external water temperature gauge to Injection car
I used it to attach a water temperature gauge to the VTR 250.
After exchanging with the water temperature gauge attached to the Radiator, I thought that fans and other electrical systems would be affected and attached Attachment to Hose.
Cheap Attachment was sold at other sites, but it was Parts around the water so I made it as reliable Brand.
Still it feels a bit expensive ~ haha
Although there are several types of Attachment diameters, I noticed that when I installed the Hose with the image I bought it at 14 Φ was 16 Φ.
It was warmed up by Dryer and managed somehow, but when you install it let's do a preliminary story. Lol
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA CREA SCOOPY
Although whether it fits in exactly in the case of attachment, main going, and right and left are perfect for, they protrude 1 or 2 cm up and down. Since he thought that it was tight, considering form although it did not become mind so much, it got impat
Although whether it fits in exactly in the case of attachment, main going, and right and left are perfect for, they protrude 1 or 2 cm up and down. Since he thought that it was tight, considering form although it did not become mind so much, it got impatient whether to be a candidate foreign company article. Appearance is as expected. View detail
It purchased with cc[ 115 ]-izing of an ape. It arrived at hand, and he was surprised for it to be large in it being unexpected. In the case of purchase, the way which checked the size by the catalogue of the kitaco may say. It seems that town
It purchased with cc[ 115 ]-izing of an ape.
It arrived at hand, and he was surprised for it to be large in it being unexpected.
In the case of purchase, the way which checked the size by the catalogue of the kitaco may say.
It seems that town riding has also lowered the oil temperature firmly at 115 cc since the oil temperature is 100 degrees or less.
However, stock of these kit and repair fixtures was lost immediately, and there may be no manufacturer stock and it might be troubled.
View detail
Fits: HONDA Byte, HONDA ZOOMER, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA CREA SCOOPY
ZOOMER [Zoomer (ruckus)] (AF58) simple and convenient, since it is attached simply -- custom . But [ this much ] atmosphere changes considerably.
ZOOMER [Zoomer (ruckus)] (AF58) simple and convenient, since it is attached simply -- custom .
But [ this much ] atmosphere changes considerably.
View detail