Reviews
Fits: HONDA glom, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
I'd like to see a better inspection.
I was looking at the Option Parts Catalogue and thought it looked good, so I ordered it. When I opened the package and assembled it temporarily, I found that the parts were not aligned with the crankcase, so I looked at the back side and found that one bolt that holds the plate with the KITACO manufacturer's name on it was completely sticking out and touching the case, so I could not install the plate.
I had no choice but to buy an M3 8mm countersunk screw from Home center and reattach it.
I measured the original screws and found that they were 10mm and 5mm, too long and too short. The instruction manual also had M3 in the Parts List but M4 in the instruction manual.
Also, I would like to mention that the rattling of the Change Pedal in the lateral direction affects the pedal. The Up pedal is fine, but the Down pedal is already getting chipped off as the corners hit it.
View detail
Since it is a soft type, durability is not expectable. Since he wanted to use a pink hose, it was bought, but I thought that it was good with it being a little harder.
Since it is a soft type, durability is not expectable.
Since he wanted to use a pink hose, it was bought, but I thought that it was good with it being a little harder.
View detail
Fits: Others MikuniVMΦ26Carburetor, Others MikuniVMΦ20-246Carburetor (discontinued)
We do not recommend it
I bought it as an overhaul of my long-time VM26 Carburetor Size doesn't fit in well with the large size
I wondered if I had made a bad choice, but there seems to be no mistake
After all, does the year of manufacture of the Carburetor make a difference?
This is a delicate area
View detail
I don't smoke at all
It didn't smoke even with the 64mm Plate, so I put it on without the Plate, but it doesn't smoke at all yes
By the way, it's 50cc
Also, this second instalment
Don't just delete the inconvenient imprints, We-Big
You thought you were fooling me with an apology email
I'm writing this so that other people don't lose money buying this
View detail
don't!
It didn't smoke on Plate64 either, so I tried Plateless and it didn't smoke
I went back to the air cleaner I originally had on,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
、、、、、、、、、、、、、、
View detail
Fits: HONDA LITTLE CUB, HONDA MONKEY BAJA, HONDA MONKEY R, HONDA MONKEY RT, HONDA MONKEY, HONDA CUB press 50, HONDA BENLY50S, HONDA BENLY50CD50, HONDA MOTRA, HONDA CL50, HONDA CRF50F, HONDA XR50R (For competition), HONDA GORILLA, HONDA CHALY 50, HONDA JAZZ, HONDA GIORCUB, HONDA SUPER CUB 50, HONDA solo, HONDA DAX, HONDA MAGNA50
It may be a bad finish
There was no problem asking on August 19th, this time Kit was about 50 kilometers, and I burned lightly. Setting was a bit dense, so I think that it will not get burned at first. Perhaps the finishing of the product was bad. In such a case, how can I do it right? I was hurried so I procured parts individually this time, but I am a Honda exclusive store. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, HONDA glom, HONDA glom, HONDA MONKEY125
Recommendation made by another company.
On Bore up vehicles, Roller will be worn out during competition usage from 3 days to 5 days.
Because Repair Parts is difficult to obtain, I will recommend other manufacturer's products.
View detail
Fits: HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD
There was expected result.
Engine's Bore up at OEMKICK I was dissatisfied with the power of KICK, so I thought variously and eventually made it to KITACO. The feeling of use is satisfied with the firmly transmitted KICK power, dissatisfaction points
1. Tightening of Spline part The precision and strength of Screw is very bad, or Screw stupid at the time of installation, and this part used the OEM part.
View detail
I was excited to receive this product however I couldn't use it as the pins are different to my stock wiring harness. Therefore I can't comment on the performance
I was excited to receive this product however I couldn't use it as the pins are different to my stock wiring harness. Therefore I can't comment on the performance View detail
If he has no processing since he attached to the CUB, he thinks that he is satisfactory in MONKEY around which an Oil pump did not turn. [ which is satisfactorily made as for use since it is not so serious processing ]
If he has no
processing since he attached to the CUB, he thinks that he is satisfactory in
MONKEY around which an Oil pump did not turn. [ which is satisfactorily made as for
use since it is not so serious processing ]
View detail
Although the Dress-up of the Crankcase of a CREA SCOOPY up was equipped, since attachment is only put and fixed after an established Cover, it is easy for the emergency. Cheapness has , however a Plating a little, and fixation of attachm
Although the Dress-up of the Crankcase of a CREA SCOOPY up was equipped, since
attachment is only put and fixed after an established Cover, it is easy for the
emergency.
Cheapness has
, however a Plating a little, and fixation of attachment feels that it is somewhat loose.
Although the part which is not pure, and appearance are uncomfortable just for a moment, if
of the fine thing is not carried out to mind, there is no problem.
View detail
Fits: HONDA CRF50F, HONDA XR50R (for competition), HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA solo, HONDA monkey, HONDA monkey, HONDA Little Cub, HONDA Little Cub, HONDA MONKEY BAJA, HONDA BENLY50CD50, HONDA BENLY50S, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA DAX, HONDA CUB press 50, HONDA JAZZ
Since evaluation was good, it attached, but I thought that high rotation did not turn as your evaluation. It seldom changed to the NORMAL.
Since evaluation was good, it attached, but I thought that high rotation did not turn as your evaluation. It seldom changed to the NORMAL. View detail
It joined to the 8-mm Silicon cord of the TAYLOR. It is a product first. It is the code of 8mm as a 7-mm code is designed as a premise. It did not enter as it was. extending insertion part and applying an Oil a little even if it makes i
It joined to the 8-mm Silicon cord of the TAYLOR.
It is a product first. It is the code of
8mm as a 7-mm code is designed as a premise. It did not enter as it was.
extending
insertion part and applying an Oil a little even if it makes it easy to slide on --
-- it was not able to insert to the back at all.
Although the
code was processed thinness and inserted, when the part of the
point of contact was the code in the state where it put in forcibly for back feeling, a little, the
center position shifted, and even if measured with the
Tester, without contacting the electric wire of a code, a value did not come out.
-- a pure cord cover portion is diverted after all, the portion which covers the Cable of the
Plug cord is cut, and it is easy to do
contact of -- as -- It was able to use.
When this product is used 7-mm code strict observance is foundations.
With no
resistance If there are few selection kinds since there are few goods, but the
price is considered, they will be such a thing or ? っ. I would like to use for the time being in
actual condition.
View detail
For reason, in connection with a Bore up, the Rocker-arm Shaft of purchase and a NORMAL is purchased in consideration of durability. [ in which it had the crack ? very well (2000 km run) ]
For
reason, in connection with a Bore up, the Rocker-arm
Shaft of purchase and a NORMAL is purchased in consideration of durability. [ in which it had the crack ? very well (2000 km run) ]
View detail
Since it is a soft type, durability is not expectable. Since he wanted to use a pink hose, it purchased. I thought that it was good with it being hard to a slight degree, and being a raw material which is likely to withstand long use.
Since it is a soft type, durability is not expectable.
Since he wanted to use a pink hose, it purchased.
I thought that it was good with it being hard to a slight degree, and being a raw material which is likely to withstand long use.
View detail
BWS125X was equipped. Since the muffler and the pulley are changed, setting out is set to 3, but it cannot feel at all. It is the same even if it uses which channel. Those who have a margin in money need to attach. We recommend you to use
BWS125X was equipped.
Since the muffler and the pulley are changed, setting out is set to 3, but it cannot feel at all.
It is the same even if it uses which channel.
Those who have a margin in money need to attach.
We recommend you to use money for other components.
Since the tune is not getting worse, I will consider it as two stars.
View detail