Reviews
Fits: HONDA CRF250 RALLY, HONDA CRF250M, HONDA CRF250L
Can be installed without modification.
It can be easily installed inside the LeftCowl of a 2023 CRF250RLY50.
I crawled Daylight's Wiring from there and the cord was short and convenient.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI ST250, SUZUKI katana, SUZUKI GSX-R1000
GSX-S125 2023 has differences such as Wiring allocation
[How is it used?
Installed on a DL32D GSX-S 125 2023, used to take out ACC power from a DAYTONAD-UNIT WR. (I plan on wiring the D-UNIT WR with Fog and Others additional power system)
Was the one you received as per Image?
No problem.
Was the installation difficult?
When installed on a 2023 model (DL32D), the ACC (+ wire for Attachment) and GND (Grounding Wire) of this product are reversed. In my case, I connected the ACCPower Cord of D-UNIT WR to the GND wire.
Also, in the 2022 and earlier models, a blind lid was attached to the connector on the body side of the GSX-S 125, and there was no connection beyond that point, but as shown in the photo (…) in the 2023 model, another connector was connected beyond the connector on the body side, and the wiring seemed to extend beyond that point. As you can see in the photo (…), in the 2023 MODEL, another Connector is connected to the end of the Connector on the Body side, and Wiring seems to be extended to the end of the Connector.
Therefore, we disconnected the OEM's Connector and inserted our product between them.
How was your experience with it?
The objective of getting ACC power was achieved without any problem.
[Included Parts:were they on?
users' manual
[Was there anything that disappointed you?
Not particularly
Some may consider this product to be price sensitive, but I think it is a good choice because it can be quickly returned to NORMAL when sold.
View detail
Fits: HONDA SUPER CUB 50Standard, HONDA SUPER CUB110, HONDA SUPER CUB110Standard
Easy installation for everyone
The point that anyone can easily install is good. However, when removing the body of the SUPER CUB, the part that comes in contact with the SUPER CUB is
If you cure with tape in advance, you can avoid putting wounds on the surface.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Ideal for Attachment power supply extraction
Ideal for taking out Attachment power supply
DL1000 V-STROM250SX is designed to be easily inserted into a connector of the same shape by removing the cover under the tandem seat to reveal the connectors.
I think this is a good product because power can be removed without damaging the Wiring.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Kitako Power Extraction Series!
Is it for SEA BASS/Yamaha?
I purchased this for my VSTROM250SX.
If you look for a lump at the bottom of the Rear Sets, you will find a Connector, which you simply remove and insert this Adapter between the Rear Sets.
It is very easy Exclusive Design!
View detail
CT125 was not supported.
I bought it with the naive hope that it would fit ServiceCoupler, but it did not fit at all.
I used only MarkTube, Bullet Terminal and Wiring and discarded Coupler.
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Easy power extraction
I put this on my 2023 CB1300SB and was able to connect it without removing the rear cowl. The price is reasonable and I am glad I bought it. View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
I would use it if I had it.
Product Name
KITACO KITACO Power Outlet Port Harness
Item Number
756-9000200
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect for customization and maintenance of the wiring process.
Why did you choose this product?
It is very easy to use, and it makes the wiring process easier.
Was the one you received as per Image?
It was exactly as shown in the Image. The price is right for the ease of installation. Just pull it out and insert it in between the two.
Was the installation difficult?
It is not difficult to solve. It's something that makes it easy.
How was your experience with it?
It is recommended if you are going to install an electronic device such as a DriveRecorder, etc. There are other fits besides YamahaManufacturer.
[Included Parts:were they on?
None in particular. Only a statement of explanation.
[Was there anything that disappointed you?
It would be nice if the price was lower, but it is good.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI SV650, SUZUKI SV650X, SUZUKI GSX-R1000, SUZUKI GSX-R600
Easy power supply extraction
[How is it used?
GSX-R600 (K6) I purchased the Accessories power supply to pull Accessories power from the
I thought I would make it with Bullet Terminal since I only needed to branch Harness, but it looked easy enough, so I bought it.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
Although the applicable year was 2007, I bought it thinking it would work for 2006 as well, and it worked fine.
It is very easy as it is just a matter of interrupting the Wiring Connector that goes to the Tail lamp.
[Points to note]
Not particularly
How did it compare to other products?
Not really a product, but I was thinking of processing Harness.
It is more expensive, of course, but the price is worth it because Accessories power can be removed in a few seconds and restored immediately.
【Review】
It is easy and good for those who are not very good at Wiring processing.
It is also time-saving because all you need to do is connect the Bullet Type Terminal to the Bullet Type Terminal of the electronic device you want to interrupt and use.
View detail
Fits: HONDA SUPER CUB 110, HONDA SUPER CUB 110, HONDA CROSS CUB 110, HONDA CROSS CUB 110, HONDA SUPER CUB 50 PRO, HONDA CROSS CUB 50, HONDA SUPER CUB 50, HONDA CROSS CUB 110, HONDA SUPER CUB 110 PRO
GND
GND is not available from the Connector and must be separately connected to the vehicle body View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Plug and play
About quality and texture : very quality build by kitaco About the feeling of use: safe wiring Products to buy together: i bought givi sidebox with signal lamp Difficulty of installation : very easy plug n play Cost performance and comparison with other products: worth every penny About shipping and packaging: very well packaged Any concerns, cautions, or advice when purchasing: make sure.suitable for your model View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Mounted on REBEL 1100
I couldn't find any for the Rebel 1100, but this product was said to be compatible with it, so I bought it and installed it as an ACC power source for the Fog Lamp Unit. It was a simple installation, just peel off the tape and install it between the couplers. View detail
Z900RS (2024) For power supply extraction
Used to take out USB power supply from Z900RS (2024 Yellow BallEdition).
Just stick it in the Connector under the Seat. (Coupler is wrapped around with Black Tape as you wrote.)
No problem as it stays under Seat even after sticking.
It is very easy and anyone can work with it.
View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI NINJAZX-25R-SE, KAWASAKI NINJAZX-25R, KAWASAKI NINJA250R
To DAYTONA's D-UNIT.
Used to install DAYTONA's D-UNIT. I did a lot of research, but I was able to install it without any particular difficulty. View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI NINJAZX-25R-SE, KAWASAKI NINJAZX-25R, KAWASAKI NINJA250R
Very handy and convenient.
I use this product on my Kawasaki Z400 (2024 model). It is very convenient. View detail
Fits: SUZUKI SV650, SUZUKI SV650X, SUZUKI GSX-R1000, SUZUKI GSX-R600
ideal power harness
It is essential harness because there is no additioanl power outlet prepared in SV650. Quite easy to connect but need to re-route original cable for tail lamp due to the lengh of the harness. I am going to supply 12v power to the relay with this for operate the acc. electrical parts. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
The easiest way to start tuning
If you're not familiar with electrical tuning, you can turn into a professional with this product. You can easily draw electricity by removing the headlights and attaching them. The downside is volume. Reattaching the headlights may require some skill. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CRF250L, HONDA CRF250M, HONDA CT125CT110 HUNTER CUB
Used for DAX125
I used this product to connect USB to my DAX125. The Bullet Terminal is female for both Plus and Minus. I was thinking of taking the Chassis Earth out of the Minus, but I couldn't get the Chassis Earth around the Handlebar, so I used the terminal of this product. It is convenient to be able to get power supply without using Electro Tap. View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250M, HONDA CRF250L
Wiring No processing
I bought this for Grip heater, I didn't want to modify the Wiring, so I am Large satisfied. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-S750, YAMAHA YZF-R1M, YAMAHA YZF-R1 , YAMAHA YZF-R6
I thought it was for etc installation.
I bought this product because I wanted to install etc. on my yzf-r1.
It is a Recommendation because it is very easy to take out the power Wiring with Couplet-on.
View detail