Reviews
I have been using it for many years on my Helmet for street riding.
I use it on my ARAI full face helmet for street riding, and it is convenient for me because I can attach and detach the helmet's chinstring with one-touch, but I have to remove the Snap button on the chinstrap belt, However, the Snap button on the chinstrap belt has to be removed, so it is a bit tricky to install. The Gold Parts are made of steel, so rusting is a bit of a problem.:I would be happy with Large change if they commercialize it in Stainless Steel (even if the price is higher, I would still buy it...). I would be happy to buy it if it was made in Stainless Steel. View detail
One-touch with this
I replaced the chinstrap on my helmet with a one-touch. The other day I went on a long touring trip and noticed that I was not wearing a chinstrap and managed to tie it through the ring with my left hand, but I was reminded that it was dangerous to use a large clip while riding and I remembered that KIJIMA has a one-touch clip and ordered one. I thought about it, and this was the third time I had ordered one. When I looked at the delivered product, I saw that it was exactly the same as before. The installation is easy for anyone. As for the quality, I think it would be easier to install if the claw that locks the clip by pushing it in was longer and could be adjusted in about three steps. View detail
It is reliable to be moved by the structure which main structure parts carried out firmly by metal. Therefore, it matches on the Jet type Helmet of black rough [ for American motorcycles ] well. Satisfactory also in price. however, it is the very meta
It is reliable to be moved by the structure which main structure parts carried out firmly by metal.
Therefore, it matches on the Jet type Helmet of
black rough [ for American motorcycles ] well.
Satisfactory also in price.
however, it is the very metal -- originating -- it is felt a little heavy.
Moreover, I thought that it would be better if an outline dimension is brief to a slight degree on the whole.
A demerit mark was given to one * at this point.
However, I think that good shopping was carried out as comprehensive evaluation.
View detail
It is nostalgic. It used also 25 years before . Since it is convenient, it uses recently, buying it again. Since it is somewhat heavy and some painful times have a jaw, it is -one point. Since a stronger One-touch clip than this is not k
It is nostalgic.
It used also 25 years before
.
Since it is convenient, it uses recently, buying it again.
Since it is somewhat heavy and some painful times have a jaw, it is -one point.
Since a stronger One-touch clip than this is not known for the moment by
, I think that this is good.
View detail
The Items which enables it to desorb simply the Helmet which adopts D ring system by a Buckle. Since it is overflowing on the Net, is anyone of how to attach problematic? As comment, it is the place that it is so so. It is charm tha
The Items which enables it to desorb simply the Helmet which adopts D ring system by a Buckle.
Since it is overflowing on the Net, is anyone of how to attach problematic?
As
comment, it is the place that it is so so.
It is charm that can cancel Locke of a Helmet easily.
Compared with what is equipped standardly with AVAND of OGK, etc., a function is inferior in
.
Although it turns out that it was acted as Locke of that of
AVAND at the feel made into the Snap, the direction of an One-touch has almost no response.
The former receives that it is with a Center Button, the latter is contrary to appearance, and
Locke's release method is also a SIDE.
Since it is
metal fittings, it is also a subtracting point that there is some weightiness.
This point is whether since it is the durability of goods, and a trade-off, it is unavoidable.
Let's be ready for it and purchase that it is a
general-purpose article.
View detail
[Webike Monitor] It attached to the ARAI's Classic SW. Although others are also said, there is no description. Since the Button (?) which an ARAI inserts in a jaw string's end with パチン of prevention with butter was attached, the string did not pass
[Webike Monitor] It attached to the
ARAI's Classic SW.
Although others are also said, there is no description.
Since the Button (?) which an ARAI inserts in a jaw string's end with パチン of prevention with butter was attached, the string did not pass easily, but on the Plierses, opened metal parts once and let them pass.
The
using feeling feels it as the somewhat large kana ?.
I think that considering a price and convenience they are good goods.
View detail
Z-6 on hand and HORNET-DS are equipped. Since desorption is easy compared with a D ring, convenience is convenient. About safety, it will fall more certainly pure. since it has not separated during use, so that it regards as questionabl
Z-6 on hand and HORNET-DS are equipped.
Since desorption is easy compared with a
D ring, convenience is convenient.
About
safety, it will fall more certainly pure.
since it has not separated during
use, so that it regards as questionable -- でも --
-- I think that there is nothing.
(Wishiful thinking) ?
attachment removed the Snap button for both of the Helmets whether it can be used in the
Circuit.
It does not use at any rate.
If
Buckle portion is bent, it will enter, but it is safer not to do
What drops intensity specially.
= yield point bent once [
] is exceeded -- therefore -- appearance -- even when it is OK, there is a danger electrical of doing
fracture of.
Probably, he should understand that there is a
Risk.
Locke will stop, if it puts exactly, but since the click feeling is thin, after
Locke's carrying out, it is checking pulling once and not escaping.
It has already grown into a habit.
If it forgets to act as Locke carelessly and begins to
Run as a Demerit which the direction besides
is not writing, it will be flapped by the wind and will be in charge of the exterior of a Helmet with a clang.
-- when the first, what sound it is -- with no getting [ impatient ]-?? mistake.
(Smile)
The Buckle instigated in the style of once moreover hits the Adam's apple directly, and it is
うぎょあぐえぇぇぇぇえぇぇぇ during a run (;_; It has become.
(Smile) )
Let's run after stopping a Buckle exactly.
(Bitter smile)
View detail
It used for the ARAI's SZ. It is satisfactorily easy, and attachment also has intensity rather than the One-touch clip made of resin by metal metal fittings, and is safe. Although the Center shifted at the time of a plug and the Clip of such st
It used for the ARAI's SZ.
It is satisfactorily easy, and
attachment also has intensity rather than the One-touch clip made of resin by metal metal fittings, and is safe.
Although the Center shifted at the time of a plug and the Clip of such structure also had the thing of being hard to equip, desorption of that made from this KIJIMA was completed in general satisfactorily.
I think that it is useful for crack prevention when a Rubber also places a Helmet in the circumference of
metal parts.
Although after
is perfect if what does not rust this metal construction material easily is adopted
View detail
Although a jaw string is what is locked in a Smooth, he forgets a thing without an instruction manual, and to put in the pin of a Holder. He noticed later.
Although a jaw string is what is locked in a Smooth, he forgets a thing without an instruction manual, and to put in the pin of a Holder. He noticed later. View detail
The helmet with a one-touch clip corresponding to 125 cc was used at the time of driver's license acquisition, and and I thought all is like this, and since it was only a belt when I bought a full face, since a half-helmet was not good, I purchased. A jaw
The helmet with a one-touch clip corresponding to 125 cc was used at the time of driver's license acquisition, and and I thought all is like this, and since it was only a belt when I bought a full face, since a half-helmet was not good, I purchased. A jaw string is very convenient item for those who are using the full face every day, since there is a shock to the extent that a helmet falls out in case of an accident, although it is safer if the belt is fastened. I had attached at first in a helmet purchase store, but after the 2nd times, although attached by myself, the stop implement of the belt part was cut off by the nipper, and it has attached. Although it seems that those who attach dexterously without cutting off a stop implement but it was impossible for me. If I use for some years, the position of rubber will deteriorate and it begins to melt. The position of the collar became black when wearing Y shirt etc. Even if there is no this rubber, it may be ok. Since a price is not expensive, it is recommended for those who think the belt type is troublesome. Even if I wear the glove regardless of summer or winter, I can do simply. Since there are the belt 27 mm in widths and the one for 18 mm, please be careful. View detail
I always stuck at the touring point. Since I wanted, I judged to be one-touch whether it would be processed. Although the impression of others was seen and I considered, I think that it is OK also in a form like a photograph. The button would be as it is
I always stuck at the touring point. Since I wanted, I judged to be one-touch whether it would be processed. Although the impression of others was seen and I considered, I think that it is OK also in a form like a photograph. The button would be as it is and the tool does not need to be used. If it lets D can pass into the position of the hoop out of which it flew and came, it may prevent to miss. When you buy, please measure a string's width exactly and purchase it! View detail
Since I bought Arai's Astro IQ newly, and I wanted the one-touch clip which my friend had attached, I bought it. Although the mounting bracket side (D metal fittings) was hard to attach, it is convenient when attached. It is the charm which can be removed
Since I bought Arai's Astro IQ newly, and I wanted the one-touch clip which my friend had attached, I bought it. Although the mounting bracket side (D metal fittings) was hard to attach, it is convenient when attached. It is the charm which can be removed easily without removing a glove. Although what it is likely to be removed is anxious as others write ... View detail
With no complaint except a metal part being equivalent to a head and feeling it cold occasionally, ^^
With no complaint except a metal part being equivalent to a head and feeling it cold occasionally, ^^ View detail
The full face helmet of [Webike-monitor] Arai was equipped. Since it became impossible to have let the jaw string pass when covered with a helmet if the glove was inserted in previously, after removing the glove, sometimes often let the chin strap pas
The full face helmet of [Webike-monitor] Arai was equipped.
Since it became impossible to have let the jaw string pass when covered with a helmet if the glove was inserted in previously, after removing the glove, sometimes often let the chin strap pass, but since it became a one-touch type, even if it inserted in the glove previously, it could stop easily.
In the direction which has had such an experience, it is a recommend! Since the work of bending some metal parts and however returning them again in the case of attachment was needed, it did not go to a five stars.
If it comes to be able to perform attachment removal simply, he has no five-stars mistake!
View detail
It is convenient! In commuting Mayne's person, it is recommendation. Attachment becomes the work which removes metal fittings once to reference about in play [ of other Ho ]. When having used and felt inserts in Kutch Neither sound nor a thing wit
It is convenient! In commuting Mayne's person, it is recommendation.
Attachment becomes the work which removes metal fittings once to reference about in play [ of other Ho ].
When having used and felt inserts in Kutch Neither sound nor a thing without a feel is quite satisfactory.
View detail
It became very easy to keep in a jaw string. Since it is daily, it is having carried out just for a moment, but it is large. Although safety became mind a little, it seems to be fairly strong and seems to be OK. Since it was fairly large-patte
It became very easy to keep in a jaw string.
Since it is daily, it is having carried out just for a moment, but it is large.
Although safety became mind a little, it seems to be fairly strong and seems to be OK.
Since it was fairly large-patterned, and there was bulky touch, as soon as it surely removed D ring attached from the first and cooked it, attachment cut the sewing thread of the loop part to which D ring of the belt is attached, and took into pieces, and it attached it by sewing.
Since it pried, and it was easy and it sewed rather, and it sewed tightly to the extent that the price was also stronger from the first rather than were able to enter, I think that safety will also be satisfactory.
View detail
It uses for the system helmet of a yamaha, and ZENITH. It was able to let the snap currently attached to the chin strap from the first pass, without cutting, although it is last-minute. It is easier to have cut, since it was strained considerably
It uses for the system helmet of a yamaha, and ZENITH.
It was able to let the snap currently attached to the chin strap from the first pass, without cutting, although it is last-minute.
It is easier to have cut, since it was strained considerably and it let it pass.
If pliers hold and pull a chin strap, it passes along a direction not to cut.
Since it is the structure which adjustment of die length tended to carry out and was carried out quite firmly, a problem does not seem to have fixed power.
Although there is no telling whether what actually happens in case of an accident ... attaching from D ring, although it is natural -- also removing -- it is easy.
However, keep in mind that a possibility that it becomes impossible to use a helmet hook in a vehicle type in part is just possible.
I think that it is OK mostly.
View detail
It is these simplicity and convenience at this price! It is one recommended article. It is easy to equip Arai. (It is device necessity at how to stop) The AGO string cannot be tied one by one any longer. Also when it fell, the head was protect
It is these simplicity and convenience at this price! It is one recommended article.
It is easy to equip Arai.
(It is device necessity at how to stop) The AGO string cannot be tied one by one any longer.
Also when it fell, the head was protected firmly.
View detail