Reviews
This is good.
The shape of the mirror is designed to avoid the arm holding the handlebar, so the visibility is surprisingly good, and the bracket is thin, so it may be good to be less assertive.
The Mounting Base is a little large, so I adjusted it with a washer so that there would be no wound left on the cowl when tightening it.
View detail
Reliable Filter
I bought it two years ago and this is the second time. It was not badly stained,
Replaced to prevent carburetor clogging.
It has magnets on it so it will remove rust, etc.
View detail
First SMARTDisplay
[How is it used?
Used for city driving and touring.
I use it with Apple CarPlay.
Was the one you received as per Image?
In fact, when you hold it in your hand, it is surprisingly small.
The screen size is 5-inches, which is almost the same size as X-ADV's Meter.
Was the installation difficult?
It was easy to install as it can be powered from a USB port.
Wiring from Battery is also possible.
How was your experience with it?
I am still using it only for city driving, so I wonder if it is convenient? I am not sure if it is useful or not.
Is the Navigation screen easier to see?
[Included Parts:were they on?
The Mount in Included Parts:was easy to install.
A simple instruction manual is included.
Download the PDFFile from Kijima's website for connection and use.
[Was there anything that disappointed you?
We are not yet in full operation. "Honestly, is this how it's going to be?" That's my impression.
It may be due to my usage environment, but sometimes the music gets cut off or I can't hear it.
The connection method is called Smartphone&arrarr;SMARTDisplay&arr;Income, but I can't grasp where the cause is.
I'm using IncomeB+COM SB6X, but I'm not experiencing any interruption in SMARTDisplay and Pairing, so I'm going to wait and see how it goes a bit more.
【Review】
I chose Kijima's Display considering AfterCare and FOR JAPAN MODEL certification because it is sold by JapanManufacturer, although products with the same spec. are sold at a lower price.
Price-wise, the same type of product without KijimaLogo would be considerably cheaper.
It does not have air pressure management or DreEveRecorder like other companies' products, but it may be worth buying if the display alone is sufficient for your needs.
I'm worried about my phone running out of heat in the coming season, so I'm looking forward to seeing how long I can use it.
View detail
Volume control
[How is it used?
The volume of the external exhaust system that came with the used car when I bought it was too loud,
After Fire was also available at the same time, so it was purchased for exhaust adjustment purposes.
Was the one you received as per Image?
The size error was very small, and it was possible to mount the unit on a pontoon.
However, in our case, it will be installed in the exhaust pipe side of the exhaust system,
Drilling + Rivet fixation.
Was the installation difficult?
In the case of our vehicle, the exhaust system was inserted into the exhaust pipe,
The fact that we could not bolt on was something we could have anticipated,
Also, I had all the necessary tools on hand for processing,
It wasn't a difficult task.
We have an O2 sensor attached to the exhaust pipe on our vehicle,
It was also necessary to machine the contact points with a hole saw.
How was your experience with it?
I was able to reduce the volume from the original explosions,
For starting up (when cold), the volume is still too loud to be noticed in residential areas,
Once the Engine is started, it is ready to go.
[Included Parts:were they on?
Quantity:I bought 2pcs, but one of them had a bolt nut that came off,
It was playing in the bag.
However, it is not visible once it is installed,
I'm not talking about the scratches.
[Was there anything that disappointed you?
none in particular
Other items that would be helpful
At the very least, measure the inside diameter of the piping at the planned installation location before purchasing.
For those who intend to install the product by themselves, some manufacturing errors should also be taken into account,
It is advisable to have some processing tools and liquid gas available.
View detail
Empty Fork
Simple and effective equipment. An extension with mounted terminals, a bolt, instructions for use. This will be perfect for cleaning the fork. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS SE
Installation of groundwork
Purchased for Point cover installation.
Since all you have to do is remove and attach it, I think anyone can do it easily.
Only 1 pc of Screw lock agent will be attached, so preparation is necessary.
View detail
Absolutely Awesome!
This rear rack is absolutely awesome. Webike kept me informed throughout the whole process and sent tracking numbers as soon as the item arrived at their warehouse. Considering that it shipped from Japan to USA, shipping time was incredibly quick. The rack arrived in a sturdy box that was completely wrapped in bubble wrap. All contents were also secured with bubble wrap. It fit my 2024 Honda Trail 125 perfectly. The little clips on that secure it toward the front of the rack are a bit confusing at first, but went on easily enough. The rack fits seamlessly and looks like an OEM part, much better than some of the ugly "universal" options. My only suggested change would be to change the forward bolt brackets to have a hexagonal shape so they could be gripped more easily with a socket. Trying to hold them in place so they wouldn't just turn as I tightened the bolt was a bit difficult, but still a great design. View detail
On the MVX250F.
I used it to fill the front fork with air. It's good because I can fill low pressure like 0.4 properly. View detail
Good manufacturing, as good as OEM.
It can be tightened with confidence.
It is well made, so let's tighten it up with a proper Band.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Partially made of Steel, it is prone to rust.
[How is it used?
The Normal pedal was a bit tasteless, so it was attached to the Brake pedal version up.
Was the one you received as per Image?
The size was larger than expected and easy to step on.
Was the installation difficult?
Install the Normal brake pedal so that it is sandwiched between the Normal brake pedal.
Plus screw allows installation with a single Driver.
How was your experience with it?
The driving operation is easier because there is more area to step on.
However, it took some time to get used to it because of the slight increase in height.
[Included Parts:were they on?
Mounting Screws, Mounting Hardware, etc.
[Was there anything that disappointed you?
Body is Material:Aluminum, but the Plus screw and the bracket on the reverse side are rusted with steel. Especially when the Plus screw is rusted, it is difficult to remove it.
▼This is a common design, but you can enjoy a slightly Mischief atmosphere.
I think the discomfort during operation depends on the person.
View detail
Fits: HONDA DAX125, HONDA MONKEY125
Is it essential in modern times?
Good product
When you live a life where your phone is indispensable, battery is always a concern.
The USB port gives me a sense of security.
If you read the Instruction Manual carefully, I think it is gentle as a work S-Kill.
However, it is necessary to pay attention to the removal and installation of the light cover (plating parts) and the fit of the wiring.
View detail
I put it on as a spare.
External Fuel filter attached to ESTRELLA.
It has been immobile for a while, and you can often find a little bit of age-related deterioration in various parts of the car. 。
There does not appear to be any fuel seepage, especially in the Fuel Cock area, but there is no denying that the Fuel Cock has deteriorated over time.
The other day, I was worried about the rust in the fuel tank, and although I have removed rust to prevent impurities from entering Gasoline, I am not sure about it, so I will install an additional external type of fuel filter.
Fuel filter
A filter device used in automobiles to filter fine impurities contained in fuel.
It is used for the purpose of removing water, sand, and dust mixed in during refueling, etc., and maintaining sufficient fuel efficiency.
There seems to be a time for replacement, though not up to the air filter.
■ 50,000 km at Carburetor Vehicles
■Injection car with 100,000 km
■Diesel car with 50,000 km
is the standard.
Continued use of the filter past its replacement time will not only clog the fuel filter element and cause a lack of engine output, but will also cause the filter to lose its original function of capturing foreign matter and separating moisture.
[When the fuel filter clogs.
‥
Idling of ▲Engine is unstable.
Engine seems to stop when driving.
▲ Suddenly, Engine stopped spewing.
Failure to start = Engine will not start.
I haven't experienced the clogging of the Filter yet, but considering the distance and age, it should be replaced. 。
In my 90's ESTRELLA, the fuel filter is integrated with the fuel cock and inserted into the tank. That is not so bad, but I wanted to be sure.
I also added an external Type as a spare.
I chose KIJIMA's because it was inexpensive and I had used it before.
The deciding factor was the transparency, which makes it easy to see dirt.
Replacement procedure.
(1) Fuel Cock is turned off
↓
(2) To be sure, Gasoline in the carburetor should also be removed.
↓
(3) Interrupt the fuel filter between the rubber hose connecting the fuel cock and the carburetor.
It is wise to prepare Oil Resistant Hose separately because OEM Hose is not long enough.
↓
(4) Turn on Cook and apply Engine.
Operation check.
Fuel Cock flows by Engine pressure.
after replacement
No problems
They seem to be getting rid of the impurities for sure.
Durability...? I think Large is durable because it is inexpensive and will be replaced with a con stunt.
It is a good idea to have insurance on older Motorcycles.
Installation is also easy.
View detail
Fits: BMW R1200GS, BMW R1200GS Adventure, BMW R1200R, BMW R1200RS, BMW R1200RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1250R, BMW R1250RS, BMW R1250RT
It's a must for Oil replacement.
BMW is said to be a Motorcycle only for the rich, but I still want to put in my favorite Oil and keep the cost down.
The only thing I decided to ask Dealer for was the price, and the price is meta-fucking-high.
So I changed the Oil by myself!
Attachment, too!
This is essential in that case!
View detail
Fits: HUSQVARNA SVARTPILEN 401, HUSQVARNA VITPILEN 401, HUSQVARNA SVARTPILEN 200, HUSQVARNA SVARTPILEN 125, HUSQVARNA SVARTPILEN 250
Perfect
Perfect and fast delivery service View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-)
Cospa strongest
OEMRear Fender was so creepy that I decided to convert it to a Fender Eliminator, because the Kit is cheap, the License Plate looks like it grows directly from the Motorcycle, and there is a Loading Hook. (In Z400, removing the OEMRear Fender means losing the Loading Hook.) The fact that you can use an OEMBlinker is also Gold-friendly.
KIJIMA's description claims that it is for NINJA400 and NINJA2 Helmet50R, and does not mention a single word about my beloved Z400, but this Quantity:I bought this one because I saw some guys on the Internet who installed Set on their Z400, and the back of Z400 is almost the same as the current NINJA400.
The Kit itself is carefully processed and absorbent to the touch. I thought I got my money's worth at this stage. The installation instruction manual is also very detailed and easy to understand. The hardest part of the installation was the removal and installation of the blinker and the coupler of the license lamp, and the porting of the OEMB blinker. I cut off the rubber cover around the Coupler and solved the Blinker by my own efforts. All of them are Kawasaki's fault, not KIJIMA's. Kawasaki designed the blinker with poor maintainability. What is going on with Kawasaki?
The Loading Hook is also very useful and in a very good position. It is a great product that makes me feel like a fool to buy a kit around 20,000 yen for the same purpose when such a great kit is available.
View detail
Bag Support
Used as support for DEGNER's Waterproof Bag during touring View detail
Used for Radar installation
It is necessary to remove the Mirror until the Meter is removed.
I thought it would be easy, but it was more complicated than I thought.
View detail
Surely this is useful.
However, the helmet lock of CRF250L I bought this year is located near the rear fender, and it is indeed difficult to hook the helmet, so when I used this KIJIMA's Helmet lockAssist, I found it very easy to use. It became easy to use at a stretch when I used this KIJIMA Helmet lockAssist.
I usually leave it attached to the helmet lock and hook it up, and remove it when I use the helmet lock.
It is a very simple Ideas product, as all you have to do is pass these Parts through the DRing and hook it to the Helmet lock, but it is certainly useful.
It depends on the position of the helmet lock, but if the position of the helmet lock is not quite right and it is difficult to use, this is a convenient product that I recommend.
View detail
Fits: SUZUKI GIXXERSF 250, SUZUKI GIXXER 250, SUZUKI GIXXER150, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI BURGMAN 400
You should change the cheap ones often.
This is a reasonably priced Filter for a 2012 KTM DUKE200. If you are a normal rider, it is better to change the cheap one frequently than to buy an expensive Filter and use it persistently.ОRing should be changed once in a while, and at that time you should use Quantity:Buy Set's stuff!
Motorcycles that have been run a lot do not have gold dust, so it is enough without magnet.
The replacement procedure assumes that the Oil is drained.
Remove the lid of ?Filter. 8mmWrench
?This time we will use the lid side and the back ОRing.
Remove the filter and tighten the Bolt on the lid to finish. After replacing the filter, run it for a while to check for leaks.
By the way, the cheap ones seem to have large filter holes. The cheap ones may have oil leaking out from the gap, not into the filter but into the inside of the filter.
View detail
Moped Plate
It is easy to install.I just installed it,
How durable is the Sticker?
View detail