Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS SE
Installation of groundwork
Purchased for Point cover installation.
Since all you have to do is remove and attach it, I think anyone can do it easily.
Only 1 pc of Screw lock agent will be attached, so preparation is necessary.
View detail
Fits: HONDA XR400R, HONDA GB500, HONDA FMX650, HONDA XR650, HONDA GB400, HONDA CBX250RS, HONDA CBX250RS, HONDA GB400, HONDA GB400, HONDA GB400, KAWASAKI KX450F, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN
Thank goodness it's readily available.
I used KIJIMA oil for replacing the oil in my KLX230R. I bought KIJIMA oil because it takes a long time to deliver OEM products and they are often more expensive than the Replacements. I was able to replace the oil without any problems. View detail
Installed on GSX1100S KATANA
I bought it because of its simple shape and size. There is no drain outlet, but this is not a problem because it needs to be removed to discharge. View detail
Nice little piece
This line cover is nicely manufactured. It does not include a gasket. I was able to re use my original just fine. I don't think this does anything for the cooling but it looks cool. I like the air cooled look. View detail
Fits: HONDA GB350, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side
Satisfied
I think I bought it very cheaply. There are several types of Monkey 125 oil filters, and this is the cheapest.
It is a consumable item anyway, and the more you buy, the more you will benefit.
I am very satisfied because I was able to purchase it much cheaper than in Korea.
I plan to use it again next time. -------------------------------------------------- -------- I think it's very cheap. There are several types of Monkey 125 oil filters, the cheapest price. Anyway, it's a consumable, the more you buy it. It is very satisfactory because it can be purchased much cheaper than in Korea. I will use it again next time. Powered by Google Translator
View detail
Fits: HONDA monkey, HONDA CUB90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA BENLY50CD50, HONDA SUPER CUB70, HONDA BENLY50CD90
I wanted to create a sense of unity.
[How is it used?
We purchased the LITTLE CUB in the process of acquiring a long-abandoned LITTLE CUB and performing maintenance&Restore.
When replacing the footpeg rubber, the same KIJIMA Brown was used. Let's unify Starter kick's Rubber with Brown as well." The replacement was made from an OEM product that had not aged at all, and it was a completely appearance-oriented custom.
Did you receive the item as per the Image?
The color of the Footpeg Rubber and the Footpeg Rubber is also consistent with the same manufacturer's product, and I am pleased to see that the lower body of the LITTLE CUB is now more consistent.
Was it difficult to install?
It is less difficult, but slightly more cumbersome.
Insert a thin slotted screwdriver between the rubber and the KICK, spray an appropriate amount of oil spray or parts cleaner for lubrication, and pull it out with some force.
When installing the product, please follow the reverse procedure for Large sturdiness. Spray Parts Cleaner inside the tubular product and hurry to insert it before it evaporates.
It may be easier to work in the summer than in the winter when the temperature drops and the rubber becomes hard. (In winter, I think it will be somewhat Smooth if you warm up the product with Dryer, etc. before working on it.) 。
How did you like it?
The product has the same shape as the OEM, so nothing has changed.
This product may not be necessary unless the original Rubber was severely deteriorated or you wanted to change the color like I did.
Was "Included Parts:" attached?
This is a Simple product that contains only one Starter Kick Rubber in the Package.
Were there any disappointments?
At this point, we are not sure if the durability is as good as OEM, but since KIJIMA is a long-established MotorcycleParts&Apparel sales manufacturer, we believe that the durability is at the same level as OEM products.
Other items that would be helpful
Point and hang of installation
Above. Was it difficult to install? column, so I will omit it.
For older vehicles, it may be more troublesome to remove the old rubber that is currently attached than to install it.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual is available at Quantity:1pc. enclosed, easy to understand product as you only need to install it in reverse order after removing the old Rubber.
[Notes]
Depending on the method, some of the work may be done by force, so please be careful to avoid injury.
[ITEMS TO BUY TOGETHER
If the footpeg, handlebar grip, and kick pedal rubber are the same color, it will give a good sense of unity, so please enjoy your personal sense of style, including using different colors for all parts.
[Opinions and requests to Manufacturer
Please continue to sell the current color line nap for as long as possible.
View detail
Fits: HONDA MONKEY, HONDA MONKEY BAJA, HONDA JAZZ, HONDA GORILLA
Retro-chic and Parenthesis is good!
[How is it used?
The NORMAL clutch cover is not very attractive, so I bought it to change to a Fin type cover with a retro-chic design.
Was the one you received as per Image?
The roughness of the casting is a concern, but that also makes for a Retro-chic Image.
Was the installation difficult?
Simply remove the Screw and replace it; if the Gasket sticks and tears, you will need to replace the Gasket.
How was your experience with it?
There is no particular change in functionality, but it gives a sense of modification and improves Parenthesis.
[Included Parts:were they on?
Gasket included.
[Was there anything that disappointed you?
Not particularly
Many of the other companies' products are colorful or have MONKEY on them, etc., but this one was very universal and helpful.
View detail
Expensive but high quality products
Matching with the fins of Engine is a good product.
It adds a sense of luxury to the exterior.
Fitting is fine and easy to work with.
It is a product that is a bit expensive and difficult to afford.
The texture is commensurate with the price, though.
View detail
Fits: SUZUKI GOOSE250, SUZUKI DR350, SUZUKI SW-1, SUZUKI DR-Z250, SUZUKI DR250S, SUZUKI VOLTY, SUZUKI DJEBEL250, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI INTRUDER250, SUZUKI ST250 E Type, SUZUKI ST250, SUZUKI NZ250, SUZUKI DR250R, SUZUKI MARAUDER250 (GZ250), SUZUKI GOOSE350, SUZUKI DR350, SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI VOLTY
Cospar good
Cosmo
O-rings etc. are not included, so order OEM parts separately.
View detail
Fits: YAMAHA Majesty., YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA tricker, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA Cerro 250, YAMAHA XT250X, YAMAHA XT250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250F, YAMAHA WR250F
Gasket is not in it.
[How is it used?
Used on Yamaha's WR155R.
How was your experience with it?
In the past, we tried using another manufacturer's oil filter (WR250Retc. Oil Filter with Gasket), but the Gasket could not be used, and we used only Oil Filter, so this time we purchased Gasket separately and chose Oil Filter only. I chose to use the Oil Filter with Oil Filter only.
How did it compare to other products?
The lack of Gasket was inexpensive.
The Oil Filter itself is the same as the Large body, but the rubber part attached to this filter is thicker, and when the cover is closed, the tension is firmly applied.
The Gasket O-ring is a diverted OEM Product (93210-54805).
Since the XSR155, exciter, and YZF-R15 share the same engine, it would be a good idea to look for parts with an eye to using them as well.
[Points to note]
Note that the Oil Filter itself is the same shape as the WR250R,X, but the Gasket (O-ring) is different.
(Not surprisingly.)
View detail
Thin, square and cheap
I wanted to treat Blowby, which I had done with plastic bottles, and chose this one.
The reason why I chose it was decisively the price! Gold tanks are cool but expensive!
This Tank is thin and square, making it very easy to fix.
One ingenious point is that a rubber plate was inserted to fix the frame.
This is to prevent gapping and to prevent deterioration due to vibration. The included Strap is also long enough to fasten securely.
Blowby extended Hose and plunged into Filter #2.
When the Engine is instructed, that unpleasant Smell is reduced to Large! It has become an environmentally and rider-friendly Spec.
View detail
Used as oil catch tank
I have been using it as a catch tank for unburned 2nd oil coming out of the exhaust valve and resonator chamber of my 2ndMachine. I like it very much. View detail
Essentials for air cleaner removal
Since the air cleaner was removed and a MADMAXPower Filter was installed, the Breather Hose 650mm 6mm Diameter connected to the air cleaner was attached and fixed to the main frame with Tie Wrap. Without it, vaporized oil would drip out, so it is a must-have item when removing the air cleaner. View detail
The square shape is the Point!
[How is it used?
I used it as a CoolantReserver tank for a KLX250.
Since the OEM tank cracked in the Enduro race, we decided to go with the Small Type next time so as not to crack it.
Was the installation difficult?
It should be positioned thoughtfully so that theHose reaches the bottom of the container.
This is so that the water will flow into the Tank when it boils and go back to the Radiator side when it cools down.
[What was the best part?
Thanks to its square shape, Space can be used efficiently.
I think it is better to use a square shape because a round tube shape eats up Space unnecessarily.
[Was there anything that disappointed you?
The price may be a bit high for the simplicity of the construction.
View detail
Fits: SUZUKI Intruder Classic400, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650XT, SUZUKI BOULEVARD K5-L4(05-14), SUZUKI INTRUDER1400(87-97), SUZUKI GSX1100F, SUZUKI BOULEVARDM109R (M1800R INTRUDER/VZr1800), SUZUKI BOULEVARDC109R(INTRUDERC1800R,VLR1800), SUZUKI GLADIUS650400, SUZUKI GSX400, SUZUKI BOULEVARDC50(Intruder Classic800/C800)(VL800), SUZUKI INTRUDER250, SUZUKI GL750 INTRUDER
How powerful is the Oil Filter with built-in magnet?
In fact, this is the first time I am using it, so I am not sure how effective it is.
It is common for drain bolts to have magnets on them, and some OEM motorcycles originally use such spec. drain bolts.
But how much iron dust can be removed with a sorry magnet at the end of a Drain bolt? When I was thinking about it... Oil Filter with built-in magnet 。
If there is a magnet attached to the filter that the oil must pass through, we can expect a lot of iron powder removal, and it would be great if we could experience some kind of lasting oil performance, improved fuel economy, etc.
I look forward to the next Oil Filter replacement.
View detail
Very ordinary Catch tank
Catch tank is originally used for Circuit driving.
I'm using it as RadiatorReserver with some modifications.
It's not about performance.
Plating on the lid is easily damaged.
I'd like it to be Black or something anyway.
View detail
high-class item
More expensive than M Company's Cover, but not simply Blackish Finn.
Switching between cutting surface and Black is highly harmonized with the entire Engine
The exquisite three-dimensionality of the cover (ridges on the cover) allows for a more natural and natural appearance from the front and rear directions.
More satisfying with an increased sense of volume in appearance.
Black paint may MATCH the unmarked better than SMODEL because of Luster?
Motivated by the hassle of caring for OEM Plating, but the results are more than adequate.
Once installed, you will be convinced of this price!
View detail
Fits: HONDA GB350, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side
Shipping was fast.
I have finished acclimation of supercub110, so I replaced the filter at the same time as replacing the oil, and used the existing O-ring of FilterCap.
Installation was extremely easy
View detail
Fits: HONDA GB350, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side
Maybe it will work, ...
Monkey125 with 5 speed Spec. is now available with Oil Filter added as well as a spare. it could have been OEM, but why is it so hard to find it elsewhere? View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA TDM900, YAMAHA virago, YAMAHA Classic, YAMAHA custom, YAMAHA XT600E, YAMAHA TDM850, YAMAHA TRX850, YAMAHA SRX600, YAMAHA FZR250R, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA FAZER(85-88), YAMAHA TENERE(84-89), YAMAHA DS400Extreme bar John(00), YAMAHA Classic 00-09, YAMAHA VSTAR 00-09, YAMAHA VSTAR, YAMAHA RENAISSA
Magnet input provides a sense of security.
Magnet input provides a sense of security.
We use Magnet inlet once every two times.
Gasket is also in place.
View detail