Reviews
DL1000 V-STROM800 used for power extraction under Seat
The DL1000 V-STROM800 has an OEMOption to install a 12VCigar lighter socket under the Rear Sets. The Attachment power supply Wiring for this purpose comes to the position shown in the photo. If you use KIJIMA's ACC Branch Harness that you purchased, you can get the power supply in Couplet-on. However, please note that the +- terminals are reversed, so the terminals need to be replaced. This is recommended for those who do not want to damage the existing Wiring. View detail
Kijima ACC branch harness kit
I haven't installed it yet, but it's good because the quality of the product and the product are excellent. I'll use it well. Thank you for the meticulous packaging and sending. View detail
I can't install it on my bike jb03
The quality is well made It's jb03 about the feeling of use, and I bought it after seeing it installed on YouTube, but I couldn't find it Cost performance and comparison to other products Kitako products are easy to distribute, but the headlights may not close Delivery and packaging to WeBike in a week The packaging is great Concerns when purchasing Please check the jack and purchase it. I looked all over the line but couldn't see it View detail
Plus minus needs to be replaced in reverse for GSX1300R HAYABUSA
Precision Driver is required to shift the rubber packing→push down the gold part→replace the Plus minus→and restore the current state. View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA DAX125
Wiring is easy.
The color of the coupler is easy to recognize, and the 2-wire wiring makes it easier to install the Attachment. View detail
Installation
The Attachment power supply is an interruptible kit that is readily available for recent motorcycles,
I think it's good
NSR250R is easy because you can get an ACC power extraction Harness from Yahoo!
USB power supply will be installed.
View detail
To the third generation hayabusa!
Can be installed on the ACC Power Connector under the Tandem seat of the 3rd generation hayabusa.
However, the + and − are reversed, so they need to be replaced. If you know how to do this, it's not a big deal, but if you don't know how to do it, it may be difficult the first time you do it unless you have someone who knows how to do it teach you.
View detail
Easy connection.
It is easy to install because it only needs to be branched from the Position lamp.
Because Size of Bullet Type Terminal is thin, there is anxiety about the connection, but it is normal at present.
View detail
Small processing is required when installing on New ModelHAYABUSA.
[How is it used?
I purchased it for USB Power Port installation of New ModelHAYABUSA.
This is for the GSX-S1000, but the Coupler is the same shape, so it can be used.
Was the one you received as per Image?
The product is as shown in the picture.
How was your experience with it?
The Coupler can be installed as is, so the job is done quickly.
[Points to note]
Because New ModelHAYABUSA is special or the + and - are reversed, it is necessary to replace the terminal before installation.
Precision Driver or mechanical pencil is fine, so you can replace it by just pushing inside the Pin a little.
How did it compare to other products?
There is no particular comparison.
Other items that would be helpful
Point and hang of installation
As I said in the points to note, the + and - are reversed, so just be careful there.
I was able to install the UniversalConnector without any difficulty.
[ITEMS TO BUY TOGETHER
The list which I purchased for installation this time
KIJIMA KIJIMA:304-7150
ACC Branch Harness
https://www.webike.net/sd/22895068/
DAYTONA DAYTONA:98830
Attachment Power Supply Unit D-UNIT (D-Unit)
https://www.webike.net/sd/24050519/
DAYTONA DAYTONA:95444
Mount Kit Multi Bar Holder
https://www.webike.net/sd/23315099/
DAYTONA DAYTONA:92750
Multi Bar Holder Stem Hole Clamp Short Low Type
https://www.webike.net/sd/21846547/
View detail
ACC branching with ease
I used it for my HORNET 250.
The product I received did not have HORNET listed in the fitment, but I was able to use it with no problem.
View detail
You can get it from HeadlightPosition.
When you open the Headlight, there is a Coupler for HeadlightPosition, so you can easily get ACC power by just connecting to it.
I used it to attach the Blinker position unit, so I'm happy with the Large variant.
I think that it is convenient to use it for other, Grip heater and USB power supply.
View detail
To power the LED fog.
Because the 12V socket of OEM was installed, I bought it in order to split the Accessories power supply and install LEDFog Lamp.
Couplet-on, so you can reliably split the power supply without damaging the wiring cladding like the Electro Tap does.
It was also helpful that Bullet Type Terminal for Wiring was also included.
The color of the Coupler is White in the product photo, but the one I received was Blue, the same as the OEM.
View detail
Note that the wiring of + and - is reversed.
I used it to get ETC power for the DL1000 V-STROM1050.
There is no problem as a function, but when Coupler is put on, Black becomes + and Red becomes -.
Normally, Red is a + and Black is a -.
This is very convenient as it does not require any processing of wiring.
View detail
Attachment to secure power supply
DL 1000 V-STROM 650 Grip heater was installed so it was used to secure the power supply.
As WaterproofMT 090 type of Coupler type, I think that anything can be used as long as you type.
By plugging this Harness's Coupler into the Socket of the Attachment power supply and connecting the Wiring of the Bullet Type Terminal Plus and Minus to the Wiring of the Grip heater side, the power can be secured.
It is really useful because it does not have to cut Wiring or take it from Fuse. Attachment If you are a Motorcycle that is powered up, you are encouraged!
View detail
CROSSCUB installation required a simple remodeling
I wanted to install a USB charge socket in CROSSCUB and I found that it seems that it can be attached with Net, so it seems that CROSSCUB seemed to be different in Wiring of Earth, so it could not be used as it was. (Abunai dangerous ^ ^;;)
To use with CROSSCUB, you need to replace GreenBlack of Connector and Wiring of Green. Modification is easy so there is no problem at all.
Net information is not taken into account but confirmation by Wiring diagram or Tester is very large thing (Lol)
View detail
It does not correspond to F.
We were unable to use because our vehicle is GSX - S1000F. (Well I guess if you can process it - - - ) Because the purpose was Waterproof & no processing - - -. Please do not use it. Let's see the compatible model well !! View detail
Extremely convenient
Voltmeter etc on GSX-S1000 etc. It was convenient to use to take out the power supply when installing. Position lightHarnessCoupler interrupts the power supply, so you can process Wiring in a short time. View detail
DIY It's Exactly handy for you.
It is GOOD becoming WaterproofCoupler.
However, since the RedBlack line for taking out was a Bullet Terminal like the image, 2-pole Waterproof Coupler is prepared separately.
View detail
Powering USB.
【What made you decide the purchase?】 Required
Since you can easily secure the ACC power supply.
【How was it actually used?】 Required
It is convenient because it can be taken out without damaging Wiring of the car body.
【Was it difficult to install? (Hard parts case)】 Any
Easy because it just breaks into an empty Coupler.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
An amateur can do it, too..
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] Required
None
【Hope for Manufacturer - Please let me know if there are any improvement points】 Required
None
【Have you compared items?】 Required
None
[Others] Any
View detail
Like OEM Product!
I bought it to attach USB power supply. Because it is CouplerON like the OEM Product, we did not have to worry about machining and it was possible to secure the ACC power supply. I used it as Relay's switch since it was attached to Relay for the time being. I am satisfied with the point that it can be added without hurting OEMWiring and not looking dirty again.
View detail