Reviews
Reliable Engine Guard
I bought this because I was worried that the side pipe on my NC750X alone would interfere with the side pipe when it tipped over. I was told that it would interfere with the side pipe and that it was Large sturdy, but it did interfere with the side pipe. I had to cut it with a sander and paint the cut surface matte, but I was satisfied with the finished product.
Sparks and noise are great when cutting, so be careful if you try it.
View detail
sv650KIJIMAEngine Guard
KIJIMAEngine Guard installed on sv650.:Pair (for Left and Right) The part that connects the Quantity with the Lock nut is the Quantity:Pair (for Left and Right) It was difficult to tighten evenly. Other than that, it is easy. I am not sure how effective it is, but I like it because it is firm and comfortable. View detail
Universal Engine Guard
Not only does it simply protect your motorcycle, but it is also highly universal as it can be fitted with a variety of accessories.
Installation requires a panda jack or Torque wrench, so it is not easy for everyone, but in the end, it is a Bolt On product in the extreme, since all you have to do is remove the Bolt and install it.
Panda Jack and Torque wrench are cheap enough, so if you need to buy more, it will cost about 5000 yen or so, or about 15,000 yen if you order from the Shop.
It is easy to do if you watch YouTube for reference.
Drink holder, Glass Holder, Tool Box and Fog Lamp
Multi Bar named Engine Guard.
Since other companies' Engine Guard cannot be installed in various ways, I recommend this product from KIJIMA.
View detail
I like it.
While choosing a product that would suit the z900rs and also provide reliable protection to the engine cover in case it falls over, I chose a product that seemed to have an appropriate size and wide protection range. When I received it in person, it was as good as I expected. -------------------------------------------------- -------- In the case of the Z900RS, but in the case of falling in place, I chose the product, which has a suitable size and a wide range of protection while choosing a product that can certainly protect the engine cover. It was as good as I expected when I received it in real life. Powered by Google Translator View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Neat product
I previously installed a K-speed bumper guard, but I didn't like it because it was a plastic injection product and was attached with a sticker.
While searching for we bikes, I found the Kijima bumper guard and installed it.
Products imported into Korea can only be installed if the license plate bracket is replaced. -------------------------------------------------- -------- I didn't like it because it was attached to K-SPEED Bumper Guard, but it was attached as a plastic injection product. While searching for Webike, I searched for Kijima Bumper Guard. Products imported in Korea can be installed only by replacing the license plate bracket. Powered by Google Translator
View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
CROSS CUB would be this!
Excellent stability, especially when loaded with Large luggage
Much more stable than DRC's LongSTAND
The base is wobbly, but according to the Instruction Manual, that is the spec.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
ยางรองขาตั้ง kijima อันนี้รูปทรงกวนๆดีครับ ช่วยได้เวลาลืมเอาขาตั้งขึ้น ขี่ออกรถไปเวลาโดนพื้นถนนจะดีดขึ้นเข้าที่ครับ View detail
Fits: HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200N, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200XS, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883N
XL1200XS
I wonder if it's easier to get STAND in and out. View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
A word of stability.
Since I have the Top Case installed, the OEM Side Stand would not be stable when the Top Case is fully loaded and heavy, but the product I purchased this time has eliminated such concerns. View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
I can't go back to NORMAL.
Motorcycle is much more stable than NORMAL.
I can't go back to NORMAL anymore.
As others have written.
The gap between the Bracket and the STAND is governed by the gap between the Bracket and the STAND.
Do not install as is.
It is necessary to devise a way to narrow the gap by hitting it with Hammeretc.
Did I put in RubberWasher?
In any case, simply replacing them will make stopping much less frustrating.
I'm currently also using KITAKO's for RightSide Stand, but
If possible, I would like you to make a for RightSide Stand with this Concept.
View detail
I think it's good
It would be nice to be able to install it at the same time as Rear Sets. View detail
Fits: HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF250L
Satisfied
Very good. Didn't have a problem with the bad location. View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
A little ingenuity goes a long way.
As others have said, it is solidly built and more stable than OEMSTAND.
However, when installed as is, the gap between the STAND and the bracket is larger than that of the OEM, resulting in rattling.
Even when the bolt is tightened, the STAND wobbles because of the play.
After trying various options, I found that inserting the Spacer from KITACO reduced the play and made it feel better.
Since the complete elimination of play would result in the transmission of shock, we chose Spacer, which still has a little play.
I will write down the part numbers for your reference.
KITACO Spacer SIMM
0900-463-90006
View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
Very good
The OEM Product was so short that I thought it was made with the shortest length due to the reduction in cost, and the angle was very standing up and there was no room to spare.
It would be even more unstable if a heavy load were placed in the back.
This KIJIMAOther Brand Product is long enough to extend to the Left Side, and the STAND stands sturdily and stably.
Also, the ground contact area is large, so there is no chance of dizzying on Asphalt roads in midsummer or on dirt roads in Hokkaido.
It is rugged but seems to be very practical.
When I tried to turn the mounting bolt to remove the OEMSide Stand at the time of installation, but it was too hard to turn with the crappy Spanner I had with me. I brought it to Motorcycle store and asked them to remove and install it for a labor charge. (Lol)
View detail
Stability is Up!
Stability has been improved, such as on gravel.
The wide surface support reduces sinking even in muddy conditions.
The thickness of the Plate is just right, not too thick, so the body of the car does not stand up too much when STAND is put out.
The stick that makes it easier to get STAND out will hit your calf if you are not used to it, but once you get used to it, it is LARGE sturdy.
View detail
Side Stand Extension
Looks great! So cool!
The OEM Product is a drill and requires drilling, so this is the one I chose.
The bank angle I was worried about was also covered from the top.
It's fixed Screw, so it's no different than NORMAL.
FLHTKSE will be Full banked.
Side Stand because the front side of the root is shaved off.
It does not matter at all if this product is installed
However, a lower price would be ◎.
At this price, a small Hexagonal Wrench for tightening screws
I thought it came with it.
View detail
The description is attached and attachment was able to be attached very easily. Thank you. However, the goods price had become 799 yen part price reduction on the purchased next day, and it was the feeling which lost for a while. It was though
The description is attached and attachment was able to be attached very easily.
Thank you.
However, the goods price had become 799 yen part price reduction on the purchased next day, and it was the feeling which lost for a while.
It was thought that a few wanted consideration.
View detail
KIJIMA Crash Bar For Yamaha Bolt R-Spec
About quality and texture - Quality is good. Heavy steel. Nice paint, glossy black. Parts line up pefectly for installation. About the feeling of use - Instills confidence in case the bike is dropped. Products to buy together - No other parts needed. Difficulty of installation - Istallation was easy, bolt holes lined up perfect. I did cut some rubber inertube as a cusion for the parts that clamp to the frame down tubes so that the Bolt's frame would not get marred. Cost performance and comparison with other products Equal - Price is reasonable. About shipping and packaging - Excellent. Any concerns, cautions, or advice when purchasing - None. View detail
fast delivery good
I've been using it for a long time, so of course I trusted it and ordered it! Delivery is fast and it is good that it fits perfectly to the zoomer. Sometimes there were some mistakes because the welding of the zoomer chassis did not match, but the Kijima stand came out exactly and I bought it with confidence! I will use it again next time. Thank you. I've been using it for a long time, so of course I trusted it and ordered it! Delivery is fast and it is good that it is installed to fit the zoomer Sometimes the Zummer chassis was welded wrong, so I bought the Kijima stand with confidence! I will use it again next time thank you. View detail