Reviews
Note to Size.
It is just an Exhaust Band.
Purchased this CB400SF nc42 2016SPMODEL OEM Exhaust Band because I lost it.
Band is Stainless Steel, but Bolt is Steel.
One sizeSmaller than this, the company's Exhaust Band just barely didn't fit and I had to buy a new one.
The π diameter or measurements are rather strictly made, so it is recommended that you measure your measurements before purchasing!
View detail
Band
This is used to attach Rubber to Silencer's fixed band to prevent scratches and vibration.
The installation is a good feeling, but I thought it would be better if it was slightly smaller so that it would be a little tighter.
I am glad to hear that the scratch and anti-vibration rubber installation went without a hitch.
View detail
The volume and sound quality is about what I imagined.
Used for SpenserMODEL by Mizuno Motor.
I used this product to take care of warming up first thing in the morning, but to be honest, I wanted it to be a little quieter.
There is some resignation because it is unavoidable due to the structure (^-^;)
Construction is at Beginner Level, Band for fixing (Needle Gold) The product also comes with a "M" and I think it is safe to buy it.
View detail
Silencer replacement
Used to replace Silencer on CRM80. View detail
Fixed Chamber
It is installed to fix the Chamber.
The price is not that high and it can be fixed.
The rubber cushion was too tight to be tightened. I was able to fix the cushion by forcing it.
View detail
Heat Resistant Rubber for Exhaust Silencer
This is attached to the fixed part of the Silencer to prevent vibration and scratches.
It doesn't look bad and the price is not that bad.
I wish they would sell it in a Material with a higher heat resistance temperature.
View detail
Muffled replacement available
There is a muffled replacement and you can hear the bass well. View detail
KERKERMegaphone on the Inner silencer.
The inner diameter of the pipe after the assembly part of the KERKERMegaphone installed on a Z650 is Φ60, so I bought it to use as an inner silencer for vehicle inspection. The proximity noise level when installed as it is is about 97-99dB using a noise measurement application. How reliable is the app? But I wanted to muffle the sound a little more, so I stuffed Glass Wool inside the punching pipe.
In this state, it is now 95-97 dB, so for now, the car will be inspected with this.
I had hoped for a more muffled sound, but the StraightPunching pipe did not produce the Large effect I had hoped for.
View detail
It was harder to put on than I expected.
I used to use the hand-wrapped type for the replacement Glass Wool, but I bought this one-piece molded type to try it out.
However, it does not fit well in the Silencer I have.
Something like Large.
I managed to attach it by peeling off one roll of the outside.
I guess it was bad luck....
View detail
Purchased because I wanted to make the Exhaust System sound smaller.
I felt that the sound of the replaced Exhaust System was a little too Large, so I wrapped it around the inside Baffle.
The attached needle Gold felt short.
Perhaps the winding was not done properly, but the exhaust pressure caused the Glass Wool inside to pop out through a narrow gap in the Baffle's mounting.
Did I put the wrong front and back on? I thought so and put a new one on the opposite side, but the same thing happened.
Not enough windings? The sound did not drop that much, but the effect is not entirely absent.
I don't think there were any instructions on how to install it.
We'll see how it goes for now.
I haven't run 50 km since then, but the Glass Wool stopped coming out of the inside, so I looked inside and the Glass Wool is thinner than the amount that came out. (Lol)
It didn't seem to have much durability. (It could be because of the way I wind it.)
I have never used Glass Wool from other manufacturers, so I have no idea if this product is bad or if Glass Wool itself is like this, but I will try to use a different manufacturer's product next time I buy one.
View detail
volume
To be honest, I don't expect much volume. I like the design. Maybe it's just my imagination, but I think the torque has increased. I think it's my imagination. I'm not sure if it's just my imagination, but the Torque seems to have increased. It's easy to install! View detail
Not as durable as I thought it would be.
Used in Silencer, an Other Brand Product.
It's a personal subjective view, but it gets torn apart rather quickly.
The Punching of Silencer was clogged in the part where it was not wound.
Probably the keba on the surface has been burned off and peeled off.
As for muffling, you can adjust it by the amount and area of the roll, if you're willing to go through the trouble.
Rose, wind up, run and check the volume repeatedly.
In the meantime, I was able to get rid of the uncomfortable muffled sound in Silencer with the perfect amount and roll.
If you want, Material.:I would like the Stainless Steel needle Gold to be longer.
View detail
Does it work somewhat?
When I tried to use an external exhaust system, I bought it to counteract the unexpected noise. I thought it became a little small, but it didn't run at all unless I wound it up well. I put it back on several times and it settled down in its own way. View detail
Normal
Bought it to reduce the sound for my custom made Yamaha sr400 exhaust,it will silent the sound at lower rpm range of my exhaust but Doesn't work at higher rpm range the sound note would become even fatiguing,I guess this is subjective for different exhaust. View detail
Why not?
Purchase for winding on Baffle.
With needle gold, scattering is difficult, if you match the price with Large price pear.
When storing it in excess, let's keep it with Zip lock.
View detail
Used for MORIWAKI muffler
Buy Size because it is not quite long.
After all it was not enough capacity (Lol)
MORIWAKI's Exhaust System has a long cylinder. I thought about attaching it firmly This is Quantity : I need 2 sets. This time we made it alone in time, but it became quieter than I thought.
View detail
It looks like a percentage of what it looks like ...
Well, I am solid, but it will break ...
Even if it is Rubber mount, it breaks.
I broke up and bought and bought about 6 pieces for buying.
Finally Material : Stainless Steel as a product, 2. I made my own with 5 mm thick Flat bar.
Not only KIJIMA but this hand Aluminum Band is 2 mm thick, but it is a bit too thin
I think. Crack enters from the bent place and it will break.
Rib is set up.
If it is strongly good point to mention, even if it breaks, it can be used as Aluminum Material (Lol)
Shorten it to Fork band or become Bracket and send an elegant rest period
is.
Already 0. 5 I think that it will be a different evaluation if you make it thicker.
Especially if Aluminum does not have Kodawari, I would like to recommend Stainless Steel's one.
View detail
Thought purchase was carried out. Since the Edge portion stands although it is unclear, when using it for a Band thicker than this, it is necessary to cut with the picture the Edge portion which stands. I think that especially a wonderful point
Thought purchase was carried out.
Since the Edge portion stands although it is unclear, when using it for a Band thicker than this, it is necessary to cut with the
picture the Edge portion which stands.
I think that especially a wonderful point is a good thing since it melts although it is not, or there is also no thing problem.
View detail
It used in order to suppress vibration of the carburetor of RGVgamma.By holding a Piping joint part by a Hanger and fixing a Hanger, since there is interference with a Frame, the Piping was attached, and interference has been cleared, when direct attachme
It used in order to suppress vibration of the carburetor of RGVgamma.By holding a Piping joint part by a Hanger and fixing a Hanger, since there is interference with a Frame, the Piping was attached, and interference has been cleared, when direct attachment of the
Taper Round-shaped Air cleaner was carried out, but the Overflow by vibration has come out.It used in order to take oscillating measures.there is also saying like this, although it is different from how to use original as a
use -- it is .
Although Overflow size was merely made to smallness after all, it has removed failing in full solution.
View detail
It is an ordinary inner silencer. Since it is consumable goods, cheap one is good. Of course, silence is also O. Be careful of a size in the case of purchase.
It is an ordinary inner silencer.
Since it is consumable goods, cheap one is good.
Of course, silence is also O.
Be careful of a size in the case of purchase.
View detail