Reviews
Strong and secure
There are also mounting holes to safely secure your motorcycle. View detail
Wide range of support
Mini bike to Transporter ~ Motocross ~ On road
Wheel chock that enables a wide range of loading.
Selected by Function and Design.
Can be mounted with M8 bolts at 4 locations.
View detail
Convenient for Motorcycle parking!
I use it to park and place my Motorcycle. Even if it shakes a little, it doesn't kick. View detail
Off to load the car.
[How is it used?
Purchased to securely fasten to off-road motorcycle transporter loading.
Although there were also products made by DRC and OGUshow, we chose this product because of its price and the statement that it is exclusively for off-road vehicles.
Was the one you received as per Image?
The box in which it was packaged was larger than I had expected.
How was your experience with it?
I knew before I bought it that this product alone would not be enough to keep my Motorcycle upright.
The performance of the wheel chock cannot be achieved unless the Transporter is fixed to the floor or a concrete panel is purchased separately to fix the Wheel chock.
I thought it would be easier to fix it if the width was a little narrower. 21in. off-vehicle front wheel is too stiff.
View detail
Convenient
I use it when I mount my Motorcycle in my car.
The front and rear can be fixed, so all that is needed is to fix it with Tie Down and it will not move.
It's weight, strength, and portability are perfect.
It is easy to use.
The receiving part can be variable depending on the car model, so it can be used even if the car model changes.
View detail
Not for my purposes.
I bought gsx-r1000r with High ace because I was worried about Tie Down only.
I thought it would be a little better, but it was no different than Tie Down only.
After all, it seems to be suitable for diagonal loading of Off cars.
View detail
For Version up of Cutting Board Trailer
I bought this for loading three Off cars on a common Chinese cutting board Trailer.
If you load everything in front, the Handlebar will hit the handlebar or the shrouds will be overlapped, so I use it to hold it in place while shifting it.
The construction is crude. The Pipe is crushed when you tighten the Bolt through the fixed hole, and the texture is pricey.
View detail
For Transporter
I bought it for my Transporter.
DRC is an image for off-road motorcycles, but I use it for road motorcycles.
You can use it folded or stretched out, but it's always folded.
I use it with a wooden board because it moves quite a bit if it is a Single Body when I put it in the car.
Finally, I don't get much out of it now because I feel like I'm loading the Tire into the Seat of the car now, which is like bumping the Tire into the Seat of the car.
When I load MOTARDs, I use the Handlebar because it may not be able to be applied to the Seat when I load them.
View detail
Assuming you make changes
I bought it with the intention of using it to replace the XR100MOTARD's Shock
Because it's an imported product, I thought Wound was inevitable, and the Touch up paint for rust prevention was prepared So it was Large sturdy But, however, the hole through which the Front wheelStopper Pin is threaded seems to be a spatter of welding Accident occurred on BALI that the paint got on and the pin wouldn't go through I stripped it off with Graver and touched up paint immediately
It's an international product, so I guess it's worth the price I thought it was a good idea I'd hope for a warranty replacement if it's a solid product with a high price and quality, but I'd rework it at my own risk If you are a scheduled User, I recommend it
Since it is the WheelStopper with the widest Inch adaptation
The vehicle is nice and calm I've been wanting one of these products for a while now
It's like a lie that I was struggling with wheel stops, chain blocks, and MotorcycleJack It is
View detail
Product is good, but product management is disappointing
I bought it to prepare it for storage as we approach the sounds of winter, and when I took it off the packaging and checked it against the parts list after it arrived, I found that it was a good choice
There are only 3 bolts and one lock washer to fix the post, and one is missing There was no washer to stop the Plate. I went to the home center and purchased it and assembled it
The product is a CHINA, but I think you are checking it with the FOR JAPAN MODEL
View detail
Simple Stopper
Basically, you can use it by fixing it to something I remove the Center console from my car and make my own stand for fixing it
I think it was originally intended for off-road vehicles, but it can also be used for 250cc 17in. on-road vehicles It was available
However, the tire width is going to be a little tougher as it gets thicker
Also, if the tire width is narrow, be careful not to interfere with the Brake Disc when the vehicle is tilted It seems to be necessary
It's a good product to use after understanding the various caveats
View detail
Good condition according to 12-inches
It is nice to be able to adjust the size, but since the function size Size does not change, you will need extra space when mounted on the car.
Perhaps I think that extra space will be needed because the slide adjustment will be overtaken by Large Kirei Tire size.
I've been borrowing for 17-inches so far, but it is best not to play with 12-inches.
View detail
Quality is bad but usability is good.
I bought it for Maintenance of GSX-R1000 K9.
First I opened the box and textured and something like sand fell down. Floor is textured.
As written elsewhere, Instruction Manual was useless and parts were not enough.
I regretted why I bought this stuff.
However, it seems to be easy to use, it fails in the work of setting up Maintenace Stand once and it tilts Motorcycle to be Large. Oh yeah. - - - I moved in a panic but that stood - - - -
It did a brilliant Hold. I was happy.. I'm glad I bought it. I thought so..
View detail
With dividing, it is stopping firmly.
It is not this sale item that I am using.
I think the same thing that I sell in Straight.
Clamp is strong. There is someone written, but is not being adjusted?
I think that if you set the place where Tire hits to Limit where it is locked, it will come off.
It is after placing a straight Motorcycle before entering the Clamp.
I will keep it at home..
Maintenance is also easy to do.
I can not use SKYWAVE 650 burgman.
I think that I can not see the front Tire at all.
View detail
Price suitable
In Front Wheel ClampSTAND 12-inches ~ 19in. Products that can handle up to the present are hardly found in the current market. In that sense as well, the adjustment formula is the largest Large 19 in. I think that this product that can correspond up to Large is a thing to be transformed in Large. Regarding the feeling of use especially Large problem etc. etc. There is not, but dare to say the stability feeling by the STAND alone when using it with 12-inches KSR is subtle. For complete fixation, it is necessary to use Rear stand. View detail
Depending on the way of loading on the Transporter it is better to have good products
From around 20 years ago this product (For shape offroad) I knew there was, but I went to Transporter Motorcycle
I did not feel the necessity of this product because I fixed the car body by putting frontTire on RearSeat with cutting Handlebar when loading, but now I change the way of loading straight without cutting the Handlebar On hitting
Quantity rather than front direction Stopper : Pair (for Left and Right) It became necessary to play a role as a stop to prevent the purchase.
Now Tire is Quantity : Pair (for Left and Right) Because it does not move Large, it will help stabilize the Motorcycle.
Chock Adapter is sold to Home center (FlangeBush, 6 mm BoltNutWasher, Washer of Large eyes) I made my own, I played the same role as the chock Adapter, it is cheap.
By the way, my Transporter has laid a 9 mm thick Concrete panel in the luggage compartment.
But if you buy with Body, shipping fee will not be charged so you should purchase the Adapter at the same time.
View detail
Suppresses movement of Front wheel
When carrying Motorcycle on a Transporter, this product is unnecessary if you can cut the Handlebar and press the Front tire against the corner and fix it.
It is necessary for those who want to straighten Motorcycle and straight down.
If the Front wheel can not be fixed, it may move during transportation, the Tie Down may loosen and the Motorcycle may collapse.
Even when carrying a Front tire against a foldable Second seat such as High ace, the Front tire is Quantity : Pair (for Left and Right) It is safe to use this product because it may move to.
I have KX 450 F on Nissan's NV 200, but I removed the Drink holder at the back of the Center console, attached the Aluminum board and fixed this product on it. I install it between the driver's seat and the passenger's seat, but I can install it without particularly difficult processing.
Please install for the protection of Motorcycle and Transporter
View detail
Simple design's Tire stopper
I bought it as a stopper of Front tire when loading off-road motorcycle in Transporter.
The photo shows the Front tire of WR 250 R (80 / It is like seeing 100-21).
This product "Stopper to keep Motorcycle from moving forward" , "Can stand on its own without using Side Stand" Please note that it is not a kind of item.
This product is a hole for fixing Bolt to the floor (Φ 8. 5 × 4 places) are free. I think that it depends on the material of the floor, but there is a feeling of uneasiness that it is likely to move if it is not fixed.
In my case I wanted to change the place to load freely, so I bought Aluminum board to replace the floor and made it like a photo. The place where I pasted the same FlooringMatte as the floor of Transporter is really Oshanti (Actually, Matte was just surplus). I cut and pasted the Rubber board as a nonslip on the back.
The width of Pipe is delicately distorted, Penetrating to Pipe and free Φ 8. The hole of 5 is bent, the welding of the bottom plate is subtle, the board is oblique - - And the solid I bought was bad accuracy.
Pipe's Penetrating hole was bent a bit.. Bolt does not get straight in (Tears)
Because it is only a thing that stops Tire, I think whether it is good or not, and even though it is a ready-made product, I have not failed puncturing and welding like this. Do your best.. I also thought that I was honest. (Lol)
■ Dimensions (mm)
Outer width of Pipe touching the floor : About 170
Pipe diameter : Φ22. About 4?
From the end of the bottom plate to the edge of Pipe : About 200
Hole for fixing Bolt on the floor : Φ8. 5 X 4 places (Holes on the bottom plate are Φ 8. 5 and Φ 14. 5 holes are overlapping and vacant. It seems that M8 ~ M14 can be used)
View detail
It purchased, in order that a Transporter might carry NSF100.Although it was uneasy in whether is it easy to slide on the floor of a Transporter and to be fixed in Carpet cloth, when he got hooked even the Tire firmly, sense of stability was preeminent (i
It purchased, in order that a Transporter might carry NSF100.Although it was uneasy in whether is it easy to slide on the floor of a Transporter and to be fixed in Carpet cloth, when he got hooked even the Tire firmly, sense of stability was preeminent (it is --, although reason is not known but it is still wonderful).Since paint application can be easily deleted by contact of metal, the direction to worry considers that it is better to stop. View detail
Since I went out for the expedition of a Motorcycle well, this product purchased this product. When loading the Motorcycle into vehicles and moving, it could carry, where it fixed this product to vehicles and the Motorcycle is stabilized ve
Since I went out for the expedition of a Motorcycle well, this product purchased this product.
When loading the
Motorcycle into vehicles and moving, it could carry, where it fixed this product to vehicles and the
Motorcycle is stabilized very much.
Since the
products are also firmly made very much to details, it can use for a long time.
How about trying [ you ] once, since I will think with
that it is convenient if there is this product in migration in the
Enduro race, a Transporter, etc.?
View detail